Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Examine the mechanical properties of woven glass fiber fabric reinforced composite plate manufactured with vat-photopolymerization

ÇAVA K., İPEK H., UŞUN A., ASLAN M.
POLYMER COMPOSITES , 2024 (SCI-Expanded) identifier

Effect of the Ag coated ABS granules and hot-pressing temperature on the microstructure evolution and properties of novel Ag/ABS composites

Akçay S. B., Kocaman M., Güler O., Ömür F. D., Varol T., Aslan M., et al.
Surfaces and Interfaces , cilt.51, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Surface and Mechanical Properties of 3D-Printed Biocompatible ABS Polymers

Aslan M., Çava K., Ipek H., Kumaran S. T., Kalusuraman G., Uthayakumar M., et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.33, sa.13, ss.6398-6407, 2024 (SCI-Expanded) Creative Commons License Sürdürülebilir Kalkınma identifier identifier

Microencapsulated phase change material/wood fiber-starch composite as novel bio-based energy storage material for buildings

Öztürk G., Temiz A., Hekimoğlu G., Aslan M., Köse Demirel G., Erdeyer Ö. N., et al.
Journal of Energy Storage , cilt.84, 2024 (SCI-Expanded) identifier identifier

Crushing response of triply periodic minimal surface structures fabricated by investment casting and powder bed fusion method

Özen İ., Çava K., İpek H., Sezer R., Aslan M.
MATERIALS TODAY COMMUNICATIONS , cilt.38, 2024 (SCI-Expanded) identifier identifier

Ulexite/HDPE-Bi<sub>2</sub>O<sub>3</sub>/HDPE layered composites for neutron and gamma radiation shielding

ALVER Ü., UZUN DURAN S., DEMİRKÖZ M. B., Mucogllava B., ASLAN M., ÇAVA K., et al.
APPLIED RADIATION AND ISOTOPES , cilt.200, 2023 (SCI-Expanded) identifier identifier identifier

Physio-mechanical Characterization and Thermal Property Evaluation of Polylactic Acid/Waste Hazelnut Shell Flour Composite with Inorganic Additives

Aslan M., Gananiar ., Büyükkaya K., Ezzatkhah A., Alver Ü., Sunderesan T. K.
JOURNAL OF TESTING AND EVALUATION , cilt.51, sa.5, ss.1-12, 2023 (SCI-Expanded) Creative Commons License Sürdürülebilir Kalkınma

Experimental and numerical investigation on energy absorbing characteristics of empty and cellular filled composite crash boxes

ÖZEN İ., GEDİKLİ H., ASLAN M.
ENGINEERING STRUCTURES , cilt.289, 2023 (SCI-Expanded) identifier identifier

Additive manufacturing of PEEK-based continuous fiber reinforced thermoplastic composites with high mechanical properties

Vatandas B. B., UŞUN A., Yildiz N., Simsek C., CORA Ö. N., ASLAN M., et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , cilt.167, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Physical properties, thermal and fungal resistance of Scots pine wood treated with nano-clay and several metal-oxides nanoparticles

Holy S., Temiz A., Köse Demirel G., Aslan M., Mohamad Amini M. H.
WOOD MATERIAL SCIENCE & ENGINEERING , cilt.17, sa.3, ss.176-185, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Multiple damage detection in laminated composite beams using automated model update

Kahya V., Okur F. Y., Şimşek S., Altunışık A. C., Aslan M.
STRUCTURES , cilt.34, ss.1665-1683, 2021 (SCI-Expanded) identifier identifier

Damage Localization in Laminated Composite Beams with Multiple Edge Cracks Based on Vibration Measurements

KAHYA V., Karaca S., OKUR F. Y., ALTUNIŞIK A. C., ASLAN M.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING , cilt.45, sa.1, ss.75-87, 2021 (SCI-Expanded) identifier identifier

Effect of TiN, TiAlCN, AlCrN, and AlTiN ceramic coatings on corrosion behavior of tungsten carbide tool

Bilgin S., Güler O., Alver Ü., Erdemir F., Aslan M., Çanakçı A.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.57, sa.1, ss.263-273, 2021 (SCI-Expanded) identifier identifier

Low-energy impact response of composite sandwich panels with thermoplastic honeycomb and reentrant cores

Özen İ., Çava K., Gedikli H., Alver Ü., Aslan M.
THIN-WALLED STRUCTURES , cilt.156, 2020 (SCI-Expanded) identifier identifier

Characterization of thick carbon/basalt hybrid fiber polyester composites with graphene nanoplatelets

Aslan M., Kaymaz E. G.
MATERIALS TESTING , cilt.62, sa.1, ss.12-18, 2020 (SCI-Expanded) identifier identifier

Mechanical and Vibrational Behavior of Twill Woven Carbon Fiber Reinforced Composites

John K. M., Kumaran S. T., Kumar K. S., Kumar S. S., Aslan M., Alver U.
INTERNATIONAL POLYMER PROCESSING , cilt.35, sa.2, ss.203-210, 2020 (SCI-Expanded) identifier identifier

Mechanical properties of waste copper slag filled surface activated jute fiber reinforced composite

Kalusuraman G., Kumaran S. T., Aslan M., Mayandi K.
MATERIALS RESEARCH EXPRESS , cilt.6, sa.12, 2019 (SCI-Expanded) identifier identifier

Use of waste copper slag filled jute fiber reinforced composites for effective erosion prevenetion

Kalusuramana G., Kumaran S. T., Aslan M., Kucukomerogluc T., Siva I.
MEASUREMENT , cilt.148, 2019 (SCI-Expanded) identifier identifier

Optical and Dielectric Properties of PMMA/alpha-Fe2O3-ZnO Nanocomposite Films

ALVER Ü., TASCIOGLU M. E., GÜLER O., ASLAN M., YAZGAN A., KAYA H., et al.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS , cilt.29, sa.5, ss.1514-1522, 2019 (SCI-Expanded) identifier identifier

Evaluation of surface pre-treatments on the surface characteristics modifications in sponge gourd (Luffa Cylindrica) fibers

Kalusuraman G., Siva I., ASLAN M., Anandkumar S., Satyanarayana K. G.
MATERIALS RESEARCH EXPRESS , cilt.6, sa.9, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Free vibrations of laminated composite beams with multiple edge cracks: Numerical model and experimental validation

KAHYA V., Karaca S., OKUR F. Y., ALTUNIŞIK A. C., ASLAN M.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.159, ss.30-42, 2019 (SCI-Expanded) identifier identifier

Characterization of tanalith E treated wood flour filled polylactic acid composites

Dalu M., Temiz A., Altuntas E., Demirel G. K., Aslan M.
POLYMER TESTING , cilt.76, ss.376-384, 2019 (SCI-Expanded) identifier identifier

Tribological and mechanical performance of sisal-filled waste carbon and glass fibre hybrid composites

Aslan M., Tufan M., Küçükömeroğlu T.
COMPOSITES PART B-ENGINEERING , cilt.140, ss.241-249, 2018 (SCI-Expanded) identifier identifier

EFFECT OF FIBRE CONTENT ON THE MECHANICAL PROPERTIES OF BASALT FIBRE REINFORCED POLYLACTIC ACID (PLA) COMPOSITES

ASLAN M., KAYA M., GÜLER O., ALVER Ü.
TEKSTIL VE KONFEKSIYON , cilt.28, sa.1, ss.66-71, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Fractographic observations of the microstructural characteristics of flax fibre composites

Madsen B., Asian M., Lilholt H.
COMPOSITES SCIENCE AND TECHNOLOGY , cilt.123, ss.151-162, 2016 (SCI-Expanded) identifier identifier

DECAY RESISTANCE, THERMAL DEGRADATION, TENSILE AND FLEXURAL PROPERTIES OF SISAL CARBON HYBRID COMPOSITES

Tufan M., Akbas S., ASLAN M.
MADERAS-CIENCIA Y TECNOLOGIA , cilt.18, sa.4, ss.599-606, 2016 (SCI-Expanded) Creative Commons License identifier identifier

Investigation of damage mechanism of flax fibre LPET commingled composites by acoustic emission

Aslan M.
COMPOSITES PART B-ENGINEERING , cilt.54, ss.289-297, 2013 (SCI-Expanded) identifier identifier

Effect of consolidation pressure on volumetric composition and stiffness of unidirectional flax fibre composites

ASLAN M., Mehmood S., Madsen B.
JOURNAL OF MATERIALS SCIENCE , cilt.48, sa.10, ss.3812-3824, 2013 (SCI-Expanded) identifier identifier

Strength variability of single flax fibres

Aslan M., Chinga-Carrasco G., Sorensen B. F., Madsen B.
JOURNAL OF MATERIALS SCIENCE , cilt.46, sa.19, ss.6344-6354, 2011 (SCI-Expanded) Creative Commons License identifier identifier

Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites

Nemli G., DEMİREL S., Guemueskaya E., ASLAN M., ACAR C.
WASTE MANAGEMENT , cilt.29, sa.3, ss.1129-1131, 2009 (SCI-Expanded) identifier identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Improvement of the Working Volume and the Applications of Retractors Used in Surgical Operations

Cinel A., Ipek H., Uşun A., Çava K., Aslan M.
Farabi Tıp Dergisi , cilt.3, sa.1, ss.14-23, 2024 (Hakemli Dergi)

Otomotiv Sektöründe Bilyalı Mafsal Yatak Uygulamaları İçin Polioksimetilen (POM) Malzemelerin Aşınma Özelliklerinin Karşılaştırmalı Analizi

YAZGAN A., SERT Y., KÜÇÜKÖMEROĞLU T., TAŞÇIOĞLU M. E., ÇAVA K., ASLAN M.
Orclever Science and Research Group , cilt.3, sa.1, ss.197-206, 2023 (Hakemli Dergi)

Silah gövdeleri için geliştirilen polimer kompozit malzemeler için çok kriterli karar verme yöntemleri ile doğal takviye malzemesinin seçimi

KANDEMİR Y., Varol T., aslan m.
Gümüşhane Üniversitesi Fen Bilimleri Dergisi , cilt.13, sa.4, ss.911-926, 2023 (Hakemli Dergi) identifier

INVESTIGATING PRINTABILITY AND MECHANICAL PERFORMANCE OF 3D PRINTED RECYCLED PET WITH PLA AND TPU HYBRID ADDITIVES

Çava K., Aslan M.
International Journal of 3D Printing Technologies and Digital Industry , cilt.7, sa.2, ss.252-258, 2023 (Hakemli Dergi) identifier

Investigation of Energy Absorbing and Damage Behavior of Gyroid and Diamond Cell Based Lattice Structures Manufactured through Powder Bed Fusion Technology

ÖZEN İ., ASLAN M.
International Journal of Automotive Science and Technology , cilt.7, sa.4, ss.372-383, 2023 (Scopus) identifier

Characterisation of 3D Printed Hydroxyapitate Powder (HAp) Filled Polylacticacid (PLA) Composites

Yerli H. K., ÇAVA K., ASLAN M.
International Journal of 3D Printing Technologies and Digital Industry , cilt.6, sa.3, ss.540-547, 2022 (Hakemli Dergi) Creative Commons License identifier

Investigation of some mechanical properties of composite materials made of LDPE and bamboo at two different rates

Demirel S., Gençalioğlu O., Aslan M., Kırcı H.
Ormancılık Araştırma Dergisi , cilt.9, sa.Special İssue, ss.291-298, 2022 (Hakemli Dergi) Creative Commons License

Free Vibration and Damping Behaviour of Surface Treated Luffa/ Usp Composite Beams

Kalusuraman ., Siva ., Aslan M.
SSRN Electronic Journal , ss.1-9, 2020 (Scopus)

Compression Properties of 3d Printed Honeycomb and Re-Entrant Sandwich Core Materials

ÇAVA K., ASLAN M., ALVER Ü., GEDİKLİ H., Kalusuraman G.
SSRN Electronic Journal , 2020 (Hakemli Dergi)

Investigation of Thermal Conductivity of Wood Sandwich Panels with Aluminium and Polypropylene Core

ASLAN M., ÖZTÜRK H., DEMİRKIR C.
Journal of Anatolian Environmental and Animal Sciences , cilt.4, sa.4, ss.647-650, 2019 (Hakemli Dergi)

DIMENSIONAL ACCURACYAND PULL-OUT PERFORMANCE OF3D PRINTED VERTEBRA MODELS

ASLAN M., çava k., Yerli H. K.
Ankara Üniversitesi Tıp Fakültesi Mecmuası , cilt.71, sa.1, ss.22-23, 2018 (Hakemli Dergi)

The investigation of the mechanical properties of sandwich panel composites with different surface and core materials

ASLAN M., GÜLER O., ALVER Ü.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.24, sa.6, ss.1062-1068, 2018 (ESCI) Creative Commons License identifier

Asetillendirilmiş Yongalevhaların Esmer Çürüklük Mantarına (Coniophora puteana) Karşı Dayanıklılığı

Dizman E., YILDIZ Ü. C., YILDIZ S., ASLAN M., TEMİZ A.
KÜ Artvin Orman Fakültesi Dergisi , cilt.7, sa.2, ss.106-115, 2006 (Hakemli Dergi)

Asetillendirilmiş Ladin Yongalevhalarının Esmer Çürüklük Mantarına Coniophora puteana Karşı Dayanıklılığı

DİZMAN TOMAK E., YILDIZ Ü. C., YILDIZ S., ASLAN M., TEMİZ A., GEZER E. D.
Kafkas Üniversitesi Artvin Orman Fakültesi Dergisi , cilt.7, sa.2, ss.106-115, 2006 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

A Research on the Recyclability of Abs Thermoplastic Material and its Reusability in 3D Printers

Çava K., Dudak G. Ç., Uşun A., Aslan M.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10 Sürdürülebilir Kalkınma

Production of a Personalized Orbital Reconstruction Prosthesis from Ct Images Using the Powder Bed Fusion Process Method

Uşun A., Aksa H. C., Çava K., Varol T., Aslan M.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10 Sürdürülebilir Kalkınma

The Pull-Out Test Performance of The Hydroxyapatite (HAp) Reinforced Vat Polymerized Bone Mimic

İpek H., Aslan M., Elmas E., Terzi Y.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2024, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10

Polioksimetilen (POM) Malzemelerin Aşınma Performansı Üzerinde Viskozite ve Kimyasal Yağlayıcıların Etkileşiminin İncelenmesi

Yazgan A., Sert Y., Aslan M., Küçükömeroğlu T.
11. ULUSLARARASI MÜHENDİSLİK VE TEKNOLOJİ YÖNETİMİ KONGRESİ, İstanbul, Türkiye, 16 - 17 Mart 2024, ss.1-7

THE EFFECT OF DIFFERENT PRE TREATMENT APPLICATIONS ON SURFACE FREE ENERGY AND WETTABILITY OF GLASS FIBER REINFORCED POLYAMIDE COMPOSITE

Aslan M., Öztürk M., Kocaman M., Çava K., Çuvalcı H.
The 5th International Conference of Materials and Engineering Technology (TICMET'23) , Trabzon, Türkiye, 13 Kasım 2023, ss.425

PRODUCTION OF A PERSONALIZED MANDIBLE PROSTHESIS FROM CT IMAGES USING THE POWDER BED FUSION PROCESS METHOD

Aksa H. C., Çava K., Uşun A., İpek H., Aslan M.
7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2023, İstanbul, Türkiye, 25 - 27 Ekim 2023, ss.27

INVESTIGATION OF THE COMPRESSION BEHAVIOR OF THE ADDITIVELY MANUFACTURED GLASS-FIBER REINFORCED COMPOSITES VIA VAT-PHOTOPOLYMERIZATION

Çava K., İpek H., Uşun A., Aksa H. C., Aslan M.
7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2023, İstanbul, Türkiye, 25 - 27 Ekim 2023, ss.26

Energy Absorbing Behaviour of Triply Periodic Minimal Surface Structures Manufactured by Powder Bed Fusion Technology with AlSi10Mg Material

Özen İ., Aslan M.
International Symposium on Automotive Science and Technology, ISASTECH 2023, Ankara, Türkiye, 7 - 08 Eylül 2023, cilt.3, ss.431-443

Toz Yatağı Füzyon Teknolojisi ile AlSi10Mg Malzemesi Kullanılarak Üretilen Üç Yönlü Periyodik Minimal Yüzeyli Yapıların Enerji Sönümleme Davranışı

ÖZEN İ., ASLAN M.
Conference Proceedings of International Symposium on Automotive Science and Technology (ISASTECH), Ankara, Türkiye, 07 Eylül 2023, cilt.3, ss.431-443

Comparative Analysis of Mechanical Performance in Homopolymer and Copolymer Polyoxymethylene (POM) Materials

Yazgan A., ÇAVA K., Taşcıoğlu M. E., ASLAN M.
Conference Proceedings of International Symposium on Automotive Science and Technology (ISASTECH), Ankara, Türkiye, 07 Eylül 2023, cilt.3, ss.268-272

Exploring the Tribological Wear Properties of POM Material for Ball Joint Bearing Applications

Yazgan A., SERT Y., Taşcıoğlu M. E., KÜÇÜKÖMEROĞLU T., ASLAN M.
Conference Proceedings of International Symposium on Automotive Science and Technology (ISASTECH), Ankara, Türkiye, 07 Eylül 2023, cilt.3, ss.262-267

Exploring Tribological Wear Properties of POM Material for Ball Joint Bearing Applications

Yazgan A., Sert Y., Küçükömeroğlu T., Taşçıoğlu M. E., Aslan M.
INTERNATIONAL SYMPOSIUM ON AUTOMOTIVE SCIENCE AND TECHNOLOGY, Ankara, Türkiye, 7 - 08 Eylül 2023, cilt.1, ss.262-267

Racing Canoe Design with Carbon and Glass Fiber Composites: Improving Performance through Fabric Selection and Sequence

Derici S., Çolak A. G., Özgün O., Aslan M.
2nd International conference on innovative academic studies, Konya, Türkiye, 28 - 31 Ocak 2023, cilt.2, sa.978605723, ss.230-235 Creative Commons License Sürdürülebilir Kalkınma

PRODUCTION OF CELESTITE POWDER ADDED POLYMER COMPOSITE FOR THYROID PROTECTIVE COLLAR DESIGN AND INVESTIGATION OF GAMMA RAY SHIELDING CHARACTERISTICS

Özpınar İ., Çava K., Aslan M., Alver Ü., Apaydın G.
V. INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH, İstanbul, Türkiye, 15 - 16 Ocak 2023, ss.1053-1062

DEVELOPMENT OF PLA/TPU COMPOSITE FILAMENT FOR FDM (FFF) TYPE ADDITIVE MANUFACTURING METHOD AND INVESTIGATION OF THE MECHANICAL PROPERTIES OF THE MANUFACTURED PARTS

Çava K., Yaman Y., Özpınar İ., Aslan M., İpek H.
Middle East International Conference on Contemporary Scientific Studies-VIII, Adana, Türkiye, 7 - 08 Ocak 2023, ss.152-161 Creative Commons License

TERMAL ENERJİ DEPOLAMADA FAZ DEĞIŞTİREN MADDELERİN ODUN KOMPOZİTLERİNDE KULLANILABİLİRLİĞİ

Öztürk G., Temiz A., Hekimoğlu G., Köse Demirel G., Aslan M., Sarı A.
IV. Ulusal Karadeniz Ormancılık Kongresi, Trabzon, Türkiye, 6 - 09 Aralık 2021, ss.34

Crashworthiness Analysis of Empty and Cellular Filled Composite Crash Boxes

Özen İ., Gedikli H., Aslan M.
International Symposium on Automotive Science and Technology, ISASTECH 2021, Ankara, Türkiye, 8 - 10 Eylül 2021, cilt.2, ss.668-679

Damage localization in laminated composite beams using modal data

KAHYA V., ŞİMŞEK S., ALTUNIŞIK A. C., OKUR F. Y., ASLAN M.
IES’20 International Engineering Symposium, Engineering Applications in Industry (Virtual), İzmir, Türkiye, 05 Aralık 2020, ss.9-19

Investigation of Impact Behavior of Sandwich Materials with 3D Printed Auxetıc and Cellular Core Geometries

Özen İ., Çava K., Gedikli H., Alver Ü., Aslan M.
INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019

Effect of Acetone Vapor on Surface and Mechanical Properties of 3D Printed ABS in Different Layer Thicknesses

Çava K., Aslan M., Alver Ü.
INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019

Comparison of Mechanical Properties of 3D Printed Sandwich Materials in Cellular and Auxetic Pattern

ASLAN M., çava k., ALVER Ü., GEDİKLİ H.
INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019

THE EFFECT OF NANO-SIZED COMPOUNDS ON WOOD PRESERVATION

Holy S., Temiz A., Köse Demirel G., Aslan M.
III. International Mediterranean Forest and Environment Symposium, Kahramanmaraş, Türkiye, 3 - 05 Ekim 2019, ss.119-124

COMPRESSSİON BEHAVİOR OF AUXETİC AND HONEYCOMB CORE MATERİALS MANUFACTURES BY FDM PRİNTER

çava k., ASLAN M., ALVER Ü., GEDİKLİ H.
4th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2019, Antalya, Türkiye, 11 - 14 Nisan 2019

Localisation of open transverse cracks in laminated composite beams based on modal data

KAHYA V., karaca S., ALTUNIŞIK A. C., OKUR F. Y., ASLAN M.
International Congress on engineering and Architecture, Antalya, Türkiye, 14 - 16 Kasım 2018

The Effect of Silver Coating on the Corrosion Behavior of Copper Based Materials

Alver Ü., Güler O., Varol T., Aslan M.
19th International Metallurgy & Materials Congress (IMMC), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1121-1123

Mechanical behavior of nettle fiber filled polylactic acid composites

ASLAN M., EZZATKHAHB A., ALVER Ü., BÜYÜKKAYA K.
International Technological Sciences and Design Sympossium, Giresun, Türkiye, 27 - 29 Haziran 2018

Investigation of Thermal Conductivity of Wood Sandwich Panels with Aluminium and Polypropylene Core

ASLAN M., ÖZTÜRK H., DEMİRKIR C.
International Forest Product Congress (Orenko), Trabzon, Türkiye, 26 - 29 Eylül 2018

The effect of printing parameters on the shear strength of the 3d printed PLA samples

İPEK h., GÜLER O., Çava k., ASLAN M.
International Technological Sciences and Design Sympossium, 27 Haziran 2018 - 29 Haziran 2019

Natural Frequency Analysis of Laminated Composite Beams with Multiple Open Transverse Cracks

KAHYA V., ŞİMŞEK S., OKUR F. Y., ALTUNIŞIK A. C., ASLAN M.
International Conference on Innovative Engineering Applications, Sivas, Türkiye, 20 - 22 Eylül 2018, ss.327-334

Fabrication Of ZnO Nanoparticles By Solution Combustion Metho

Bilgin S., Alver Ü., Güler O., Aslan M., Tuzcu E.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.450

Synthesis Of Fluorine Doped Tin Oxide Nanoparticles (Fto) By Sol-Gel Technique

Tuzcu E., Alver Ü., Güler O., Aslan M., Bilgin S.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.451

Characterization Of Glass Fiber Reinforced Polyester Composites Produced By Pultrusion Process

ASLAN M., Ezzatkhah A., KAHYA V., ALTUNIŞIK A. C., Kayhan M.
International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.460

Fabrication Of ZnO Nanoparticles By Solution Combustion Method

GÜLER O., ASLAN M., ALVER Ü., BİLGİN S., TUZCU E.
International Tecnological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.448

Analysis of Shear Properties of Bonded andRiverted Joints with CFRP Composite Tubes

ASLAN M.
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018

Investigation of Mechanical Properties of Biodegredable PLA Composites

DALU M., ALTUNTAŞ E., ASLAN M., TEMİZ A.
1st International Sympossium of Light Alloys and Composite Materials (ISLAC2018), Karabük, Türkiye, 22 - 24 Mart 2018

Investigation of Mechanical Properties ofBiodegradable PLA Composites

Dalu M., ALTUNTAŞ E., ASLAN M., TEMİZ A.
1st International Symposium on Light Alloys and Composite Materials, 22 - 24 Mart 2018

DIMENSIONAL ACCURACYAND PULL-OUT PERFORMANCE OF3D PRINTED VERTEBRA MODELS

ASLAN M., Çava k., YERLİ H. K., YAZAR U., ALVER Ü.
International Symposium on 3D Printing in Medicine, Ankara, Türkiye, 16 - 17 Kasım 2018

INVESTIGATION OF EFFECT OF LAYER THİCKNESS AND FAN SPEED ON MECHANICAL, SURFACE AND MICROSCOBIC PROPERTIES OF 3D PRINTED ABS POLYMERS

ASLAN M., ALVER Ü., GÜLER O., ÇAVA K.
INTERNATIONAL SYMPOSIUM ON 3D PRINTING TECHNOLOGIES 3D-PTS2017, İstanbul, Türkiye, 3 - 04 Nisan 2017

An Investigation on Mechanical Properties of the Sandwich Panel Composites

ASLAN M., GÜLER O., CAVA K., ALVER Ü., YÜCELOĞLU E.
2nd International Defense Industry Symposium, 6 - 08 Nisan 2017, ss.143

Mechanical Performance of Laminar and Tubular Carbon Epaxy Prepreg Composites by Vacum Bag Oven Method

ASLAN M., GÜLER O., CAVA K., ALVER Ü.
2nd International Defense Industry Symposium, 6 - 08 Nisan 2017, ss.144

The Effect of the Reinforcement Content on the the Mechanical and Physical Properties of the Polyester Based Carbon and Basalt Fibers Reinforced Composites

ASLAN M., KAYMAZ E. G., GÜLER O., ALVER Ü.
2nd International Defense Industry Syposium, 6 - 08 Nisan 2017, ss.146

An Investigation on the Mechanical Properties of the Sandwich Panel Composites

Aslan M., Güler O., Çava K., Alver Ü., Yüceloğlu E.
II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.602-610

The Effect of the Reinforcement Content on the Mechanical and Physical Properties of the Polyester Based Carbon and Basalt Fibers Reinforced Composites

Aslan M., Güler O., Kaymaz E. G., Alver Ü.
II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.627-635

The Effect of Basalt Fiber Content on the Physical-Mechanical Properties of the Basalt Fiber Reinforced Polylactic Acid (PLA) Composites

Aslan M., Güler O., Kaya M., Alver Ü.
II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.621-626

Mechanical Performance of Laminar and Tubular Carbon Epoxy Prepreg Composites by Vacuum Bag Oven Method

Aslan M., Güler O., Kaya M., Alver Ü.
II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.611-620

SYNTHESIS, CHARACTERIZATION AND OPTICAL PROPERTIES OF THE PMMA BASED NANOCOMPOSITES

ALVER Ü., ASLAN M., GÜLER O., Taşçıoğlu M.
INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, Saray Bosna, Bosna-Hersek, 22 - 26 Mart 2017, ss.126

TENSILE PROPERTIES OF CARBON/JUTE WOVEN FIBRE REINFORCED POLYESTER COMPOSITES

ASLAN M., ALVER Ü., GÜLER O.
INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, Saray Bosna, Bosna-Hersek, 22 - 26 Mart 2017, ss.129

MECHANICAL CHARACTERISATION OF GLASS/FLAX WOVEN FIBRE REINFORCED HYBRID COMPOSITES

ASLAN M., ALVER Ü., GÜLER O.
INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, Saray Bosna, Bosna-Hersek, 22 - 26 Mart 2017, ss.128

Microstructure, quantification and control of dislocations in bast-type plant fibres

Ma B., Lester c. L., A. M., ASLAN M., Lilholt H.
ECCM 17, Münih, Almanya, 26 - 30 Haziran 2016, ss.1-9

TRIBOLOGICAL AND HARDNESS PERFORMANCE OF CARBON GLASS FILLED SISAL POLYPROPYLENE COMPOSITES

Kara L., ASLAN M., KÜÇÜKÖMEROĞLU T.
TURKEYTRIB'15, 7 - 09 Ekim 2015, cilt.1

THE EFFECT OF PROCESSING ON DEFECTS AND TENSILE STRENGTH OF SINGLE FLAX FIBRES

ASLAN M., madsen B., stergios G., Mehmood S.
14TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 7 - 10 Ekim 2010

Odun Plastik Kompozitlerinde Geri Dönüşüm ve Atık Malzeme Kullanımı

ASLAN M.
6. Ulusal Orman Fakülteleri Öğrencileri Kongresi, Türkiye, 08 Mayıs 2008 - 09 Mayıs 2009

The Effects of Chemical Modification on the Biological Properties of Alder and Spruce Particleboards IRG WP 07 40363

YILDIZ Ü. C., DİZMAN TOMAK E., YILDIZ S., TEMİZ A., ASLAN M., GEZER E. D.
International Research Group on Wood Preservation 38. Annual Conference, Wyoming, Amerika Birleşik Devletleri, 20 - 24 Mayıs 2007

The effects of chemical modification on the biological properties of alder and spruce particleboards

YILDIZ Ü. C., Dizman Tomak E., YILDIZ S., TEMİZ A., ASLAN M., GEZER E. D.
38. IRG (International Research Group on Wood Protection) Annual Meeting, Wyoming, Amerika Birleşik Devletleri, 20 - 24 Mayıs 2007, ss.1-6

Evaluation of Bamboo Particles as an Alternative Wood Materials in Wood Cement Composite Production,

ASLAN M., Gökalp E., KALAYCIOĞLU H.
1st Non-wood Forest Product Symposium, Trabzon, Türkiye, 1 - 04 Kasım 2006, ss.1-8

Kitap & Kitap Bölümleri

Effect of Fiber Dosage and Chemical Treatment on the Vibrational Behavior of Luffa/ USP Composite

Aslan M., Kumaran S. T., G. K.
Interfacial Bonding Characteristics in Natural Fiber Reinforced Polymer Composites: Fiber-matrix Interface In Biocomposites, Jyotishkumar Parameswaranpillai,Mohit Hemath Kumar,Senthilkumar Krishnasamy,Sanjay Mavinkere Rangapp,· Suchart Siengchin, Editör, Springer Nature, Singapore, ss.339-347, 2024 Sürdürülebilir Kalkınma

Kenevir Takviyeli Polimerik Kompozitlerin Endüstriyel Kullanımı.

DEMİRCAN Ö., ASLAN M.
Her Yönüyle Kenevir, AYTAÇ, Selim; AYAN Ali Kemal; ARSLANOĞLU Şahane Funda; BALPINAR Özge, Editör, Ondokuz Mayıs Üniversitesi Yayınları, Samsun, ss.137-146, 2023

Metrikler

Yayın

104

Atıf (WoS)

638

H-İndeks (WoS)

16

Atıf (Scopus)

698

H-İndeks (Scopus)

15

Atıf (Scholar)

168

H-İndeks (Scholar)

5

Atıf (TrDizin)

3

H-İndeks (TrDizin)

1

Proje

43

Fikri Mülkiyet

7

Tez Danışmanlığı

5

Açık Erişim

37
BM Sürdürülebilir Kalkınma Amaçları