Yayınlar & Eserler

Yayın Ağı
Makaleler 19
Tümü (19)
SCI-E, SSCI, AHCI (14)
SCI-E, SSCI, AHCI, ESCI (15)
ESCI (1)
Scopus (15)
TRDizin (4)
Diğer Yayınlar (1)

1. Bain-type distortion and screw-dislocation plasticity in single-crystal MoNbTaTiW refractory high-entropy alloy under orientation- and temperature- controlled tensile loading

REİS H. A., SEZER R., ÖZTÜRK B.
International Journal of Refractory Metals and Hard Materials , cilt.141, 2026 (SCI-Expanded, Scopus)

2. Investigating the role of nickel in CoCrFeMnNix high-entropy alloys: thermodynamic analysis and molecular dynamics simulations

REİS H. A., ELRİ K. G., SEZER R., Polat G., ÖZTÜRK B.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING , cilt.34, sa.6, 2026 (SCI-Expanded, Scopus) Creative Commons License

3. Hot-Pressing Process of 7075 Aluminum Alloy: Microstructure, Corrosion and Wear Properties

Cingöz U. C., CÖMERT Z. Y., ÖZBAY KISASÖZ B., BAYRAK Y., SEZER R., KISASÖZ A.
Journal of Materials Engineering and Performance , cilt.35, sa.20, ss.20448-20461, 2026 (SCI-Expanded, Scopus)

4. Production and characterization of AlCuMgMnZn high entropy alloy prepared by hot pressing

SEZER R., Erol M., BAYRAK Y., KISASÖZ A.
Materials Chemistry and Physics , cilt.351, 2026 (SCI-Expanded, Scopus)

5. Milling-Assisted Leaching for Mercury Stabilization and Material Recovery from End-of-Life Fluorescent Lamps

SEZER R., Cavus A. U.
METALS , cilt.16, sa.3, 2026 (SCI-Expanded, Scopus)

6. Influence of electronic wastes on the wear and corrosion properties of aluminum matrix composites

SEZER R., ÇORBACIOĞLU B. D.
MATERIALS TESTING , cilt.68, sa.1, ss.121-126, 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

7. Synthesis of high beta-phase content granules from recycled PVDF material: Effect of process parameters and ceramic fillers

SEZER R., BAŞER A. B.
Turkish Journal of Analytical Chemistry (Online) , cilt.8, sa.1, ss.20-28, 2026 (TRDizin)

8. Production and Characterization of B4C Content-Dependent Aluminum Matrix Composites Fabricated via Hot Pressing

BAYRAK Y., KISASÖZ A., SEZER R.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.34, sa.2, ss.1607-1618, 2025 (SCI-Expanded, Scopus)

9. Properties of Al/Y2O3 composites produced by Y2O3-Al2O3 interaction in powder metallurgy route

BAYRAK Y., KISASÖZ A., SEZER R.
Materials Letters , cilt.358, 2024 (SCI-Expanded, Scopus)

10. Crushing response of triply periodic minimal surface structures fabricated by investment casting and powder bed fusion method

Özen İ., Çava K., İpek H., Sezer R., Aslan M.
MATERIALS TODAY COMMUNICATIONS , cilt.38, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

11. Enhancing the Structural and Mechanical Properties of Ti-Zr Alloy through Boron Doping

İçin K., Sünbül S. E., Sezer R.
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.14, sa.1, ss.412-421, 2024 (TRDizin)

12. Determination of structural, tribological, isothermal oxidation and corrosion properties of Al?Co?Cr?Fe?Ni?Ti?Cu high-entropy alloy

SÜNBÜL S. E., İÇİN K., Seren F. Z., ŞAHİN Ö., ÇAKIL D. D., SEZER R., et al.
VACUUM , cilt.187, 2021 (SCI-Expanded, Scopus)

13. Metallothermic Production of Aluminum–Strontium Master Alloy for Modification of Silicon

Sezer R., Hızlı G., Bilen A., Ertürk S., Dışpınar D., Arslan C.
Metallography, Microstructure, and Analysis , cilt.9, ss.833-840, 2020 (ESCI, Scopus) Creative Commons License

14. Effects of Furnace Slope and Rotational Speed on the Carbothermic Reduction of Celestite in a Laboratory-Scale Rotary Kiln Furnace

Sezer R., Bilen A., Hızlı İ. G., Ertürk S., Arslan C.
MINING METALLURGY & EXPLORATION , cilt.37, sa.4, ss.1273-1278, 2020 (SCI-Expanded, Scopus)

15. Removal of arsenic from water using copper slag

TÜRK T., ALP İ., SEZER R., Arslan C.
JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.120, sa.5, ss.313-318, 2020 (SCI-Expanded, Scopus)

16. Floresan Camlarda Kullanılan Fosfor Tozundaki NTE’lerinin Geri Kazanımının Araştırılması

Bilen A., Çiftçi H., Sezer R., Birol B., Kavas T.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.19, ss.42-47, 2019 (TRDizin) Creative Commons License

17. Investigation of leaching characteristics of celestite concentrate in acidic media and SrCO3 production via precipitation

Sezer R., Bilen A., Yilmaz E., Ertürk S., Arslan C.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.34, ss.1410-1416, 2019 (SCI-Expanded, Scopus, TRDizin) Creative Commons License

18. Mechano-chemical conversion of celestite in highly concentrated sodium carbonate media

Sezer R., Arslan C.
PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING , cilt.55, ss.324-335, 2019 (SCI-Expanded, Scopus) Creative Commons License

19. Effect of Mechanical Activation on Roasting of Celestite Ore

SEZER R., HIZLI İ. G., BİLEN A., ertürk s., ARSLAN C.
MT Bilimsel , sa.11, ss.53-59, 2017 (Hakemli Dergi) Creative Commons License
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 30

1. SYNTHESIS OF ALCOCUFENI HIGH-ENTROPY ALLOY VIA THERMITE REACTION

SEZER R.
VIII. Bilsel Uluslararası Ahlat Bilimsel Araştırmalar Kongresi, Bitlis, Türkiye, 27 - 28 Şubat 2026, ss.147-156, (Tam Metin Bildiri)

2. ATIK FLORESAN LAMBALARDAN CIVA KIRLILIĞININ ÖNLENMESI VE EKONOMIK DEĞER KAZANIMI IÇIN YENI BIR PROSES YAKLAŞIMI

Üstünel Çavuş A., Sezer R.
5th International World Energy Conference, Kayseri, Türkiye, 12 - 13 Aralık 2025, ss.122-123, (Özet Bildiri) Creative Commons License

3. Impact of Fe and Co Additions on the Mechanical Behavior of NiTi Shape Memory Alloys: A Molecular Dynamics Study Under High Strain Rate

Reis H. A., Elri K. G., Öztürk B., Sezer R.
The 6th International Conference of Materials and Engineering Technology (TICMET'25), Gaziantep, Türkiye, 6 - 08 Ekim 2025, ss.249-258, (Tam Metin Bildiri) Creative Commons License

4. MAX FAZI TAKVİYELİ PANİ KOMPOZİT ÜRETİMİ

Taşyürek M., SEZER R.
5. BİLSEL INTERNATIONAL GORDİON SCIENCE RESEARCHES CONGRESS, Ankara, Türkiye, 08 Aralık 2024, ss.776-783, (Tam Metin Bildiri)

5. Production of Nano Strontium Hexaferrite by Solution Combustion Synthesis

Çalışkan C., Sezer R.
21 International Metallurgy and Materials Congress, İstanbul, Türkiye, 6 - 08 Ekim 2022, ss.636-639, (Tam Metin Bildiri)

6. Obtaining Strontium Borate Compounds by Microwave Assisted Solution Combustion Synthesis

Üstünel Çavuş A., Sezer R.
INTERNATIONAL TECHNOLOGY SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 2 - 05 Haziran 2022, ss.30, (Özet Bildiri)

7. Microwave Synthesis of Eu:SrAl2O4 Phosphorescent Powders and Doping into 3D Printable Composite Filament

Türkmen M., Sabancıoğlu E., Sezer R.
INTERNATIONAL TECHNOLOGY SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 2 - 05 Haziran 2022, ss.28, (Özet Bildiri)

8. Kimyasal Bileşimin SrM Sürekli Mıknatısların Manyetik Özellikleri Üzerindeki Etkisi

ALPTEKİN F., Çakıl D. D., ŞAHİN Ö., SÜNBÜL S. E., İÇİN K., SEZER R.
The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019, 18 - 20 Ekim 2019, ss.593-596, (Tam Metin Bildiri)

9. RECOVERY OF NICKEL FROM LOW CONCENTRATED SOLUTIONS VIA CHELATING ION EXCHANGE RESIN

YILMAZ E., SEZER R., Ertürk S., ARSLAN C., ARSLAN F.
XVIIITH BALKAN MINERAL PROCESSING CONGRESS (BMPC 2019), Durres, Arnavutluk, 23 - 26 Mayıs 2019, ss.215-222, (Tam Metin Bildiri)

10. Calcination of Strontium Carbonate in Rotary Kiln Furnace

SEZER R., Yilmaz E., Ertürk S., Arslan C.
10th International Symposium on High-Temperature Metallurgical Processing, San-Antonio, Kuzey Mariana Adaları, 01 Ocak 2019, ss.591-597, (Tam Metin Bildiri)

11. An Application Of Slip Casting Method On Solid Oxide Fuel Cells

SEZER R., ekerim a.
International Conference on Engineering Technologies (ICENTE’18), Konya, Türkiye, 26 - 28 Ekim 2018, ss.102, (Özet Bildiri)

12. Production Of Strontium Modifier from Different Sources

HIZLI İ. G., SEZER R., GÜRSOY Ö., ERTÜRK S., ARSLAN C., DIŞPINAR D.
19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.483, (Tam Metin Bildiri)

13. Kinetics of Thermal Decomposition of Strontium Carbonate

SEZER R., YILMAZ E., ERTÜRK S., ARSLAN C.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, 27 - 29 Haziran 2018, ss.433, (Özet Bildiri) Creative Commons License

14. Thermal Characterization of Manganese Concentrate

YILMAZ E., SEZER R., ERTÜRK S., ARSLAN C.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, (Özet Bildiri) Creative Commons License

15. Investigation the Reduction Behavior of Manganese Ore Pellets

YILMAZ E., SEZER R., ERTÜRK S., ARSLAN C.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, (Özet Bildiri) Creative Commons License

16. Recycling of Metallic Values from Gold Plated Brass Scrap

SEZER R., YILMAZ E., AKÇA S., ERTÜRK S., ARSLAN C.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.453, (Özet Bildiri) Creative Commons License Sürdürülebilir Kalkınma

17. Preparation of SrFe12O19 Powders with Mechanosynthesis method

ÖZTÜRK S., Çakıl D. D., İCİN K., SEZER R., Topal U., ÖZTÜRK B.
6th International Conference on Superconductivity and Magnetisim, 29 Nisan - 04 Mayıs 2018, sa.1, ss.422, (Özet Bildiri)

18. The Influence of milling Media on Structural and Magnetic properties of Strontium Hexaferrite Powders

ÖZTÜRK S., ÇAKIL D. D., İCİN K., SEZER R., TOPAL U., ÖZTÜRK B.
6th International Conference on Superconductivity and Magnetisim, Antalya, Türkiye, 29 Nisan - 04 Mayıs 2018, cilt.6, sa.1, ss.482, (Tam Metin Bildiri)

19. Production of Modifier for Al-Si Alloys

HIZLI İ. G., SEZER R., Gürsoy Ö., ERTÜRK S., ARSLAN C., DIŞPINAR D.
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.78-79, (Özet Bildiri) Creative Commons License

20. Optimization of Celestite Leaching by Using Response Surface Methodology

SEZER R., BİLEN A., ARSLAN C., ERTÜRK S.
TMS 2018 Annual Meeting Exhibition, Phoenix, Amerika Birleşik Devletleri, 11 - 15 Mart 2018, (Özet Bildiri)

21. Alumino-thermic Reduction of SrO and SrCO3

ERTÜRK S., SEZER R., ARSLAN C.
9th International Symposium on High Temperature Metallurgical Processing, Phoenix, Amerika Birleşik Devletleri, 11 - 15 Mart 2018, (Özet Bildiri)

22. Strontium Carbonate Precipitation With Ammonium Carbonate From Strontium Sulphide Solution

HIZLI İ. G., BİLEN A., SEZER R., ERTÜRK S., ARSLAN C.
XVIIth Balkan Mineral Processing Congress – BMPC 2017, Antalya, Türkiye, 1 - 03 Kasım 2017, ss.551-555, (Tam Metin Bildiri) Creative Commons License

23. Strontium Carbonate Precipitation form Strontium Sulfide Solution

BİLEN A., HIZLI İ. G., SEZER R., ERTÜRK S., ARSLAN C.
XVIIth Balkan Mineral Processing Congress – BMPC 2017, Antalya, Türkiye, 1 - 03 Kasım 2017, ss.543-550, (Tam Metin Bildiri) Creative Commons License

24. Production of Strontianite from Celestite Ore in Carbonate Media

Hızlı İ. G., Bilen A., Sezer R., Ertürk S., Arslan C.
3rd Pan American Materials Congress (PAMC), California, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017, ss.607-613, (Tam Metin Bildiri)

25. Roasting of Celestite in Laboratory Scale Rotary Furnace

Ertürk S., Sezer R., Hızlı İ. G., Bilen A., Arslan C.
8th International Symposium on High-Temperature Metallurgical Processing, California, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017, ss.469-476, (Tam Metin Bildiri)

26. Direct Conversion of Celestite to SrCO3 by Wet Milling

SEZER R., Bilen A., Hızlı İ. G., Ertürk S., Arslan C.
146th TMS Annual Meeting and Exhibition, California, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017, ss.608-613, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

27. Investigating the Dissolution Characteristics of Strontium Sulfide

Hızlı İ. G., Bilen A., Sezer R., Yilmaz E., Ertürk S., Arslan C.
3rd Pan American Materials Congress (PAMC), California, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017, ss.539-545, (Tam Metin Bildiri)

28. EFFECT OF MECHANICAL ACTIVATION ON ROASTING OF CELESTITE ORE

SEZER R., HIZLI İ. G., BİLEN A., ertürk s., ARSLAN C.
International Black Sea Mining Tunnelling Symposium, Trabzon, Türkiye, 2 - 04 Kasım 2016, (Tam Metin Bildiri) Creative Commons License

29. Investigating the Dissolution of Celestite in BaCl2 and MgCl2 Medium

BİLEN A., HIZLI İ. G., SEZER R., ERTÜRK S., ARSLAN C.
International Black Sea Mining & Tunnelling Symposium, Trabzon, Türkiye, 2 - 04 Kasım 2016, ss.479-484, (Tam Metin Bildiri) Creative Commons License

30. SÜPER PLASTİK ŞEKİL DEĞİŞTİRMENİN ALÜMİNYUM MALZEME ÖZELLİKLERİNE ETKİSİ

BAYRAK Y., SEZER R., EKERİM A.
5. Uluslararası İleri Teknolojiler Sempozyumu (IATS’09), Karabük, Türkiye, 13 - 15 Mayıs 2009, ss.727-732, (Tam Metin Bildiri)
Metrikler

Yayın

49

Yayın (WoS)

20

Yayın (Scopus)

18

Atıf (WoS)

127

H-İndeks (WoS)

5

Atıf (Scopus)

129

H-İndeks (Scopus)

5

Atıf (Scholar)

138

H-İndeks (Scholar)

6

Proje

20

Fikri Mülkiyet

2

Tez Danışmanlığı

3

Açık Erişim

28
BM Sürdürülebilir Kalkınma Amaçları
SDG 3: AMAÇ 3: SAĞLIKLI BİREYLER
SDG 7: AMAÇ 7: ERİŞİLEBİLİR VE TEMİZ ENERJİ
SDG 9: AMAÇ 9: SANAYİ, YENİLİKÇİLİK VE ALTYAPI
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM