Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Coupled effect of thickness optimization and plastic forming history on crashworthiness performance of thin-walled square tube

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.117, no.9-10, pp.2935-2948, 2021 (Journal Indexed in SCI) Creative Commons License identifier identifier

Micro Deep Drawability of the Superplastic Zn-22Al Alloy at a High Strain Rate and Room Temperature

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.142, no.1, 2020 (Journal Indexed in SCI) identifier identifier

Effects of friction models on the compaction behavior of copper powder

TRIBOLOGY INTERNATIONAL, vol.122, pp.125-132, 2018 (Journal Indexed in SCI) identifier identifier

A statistical approach to explore cemented total hip reconstruction performance

AUSTRALASIAN PHYSICAL & ENGINEERING SCIENCES IN MEDICINE, vol.41, no.1, pp.177-188, 2018 (Journal Indexed in SCI) identifier identifier identifier

Effects of grain size on room temperature deformation behavior of Zn-22Al alloy under uniaxial and biaxial loading conditions

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.672, pp.78-87, 2016 (Journal Indexed in SCI) identifier identifier

An investigation on mechanical failure of hip joint using finite element method

BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, vol.60, no.6, pp.603-616, 2015 (Journal Indexed in SCI) identifier identifier identifier

Finite element analysis of magnetic disk with a horizontal subsurface crack

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, vol.34, no.10, pp.816-831, 2011 (Journal Indexed in SCI) identifier identifier

Thermomechanical analysis of elastoplastic medium in sliding contact with fractal surface

TRIBOLOGY INTERNATIONAL, vol.41, no.8, pp.783-796, 2008 (Journal Indexed in SCI) identifier identifier

Refined 5-Node Transition Plate Bending Element Based On Kirchhoff Plate Theory

Civil-Comp Proceedings, vol.88, pp.1-11, 2008 (Journal Indexed in AHCI)

A refined 5-node plate bending element based on Reissner-Mindlin theory

COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING, vol.23, no.5, pp.385-403, 2007 (Journal Indexed in SCI) identifier identifier

A technical note on the role of process parameters in predicting flow behavior of plasticine using design of experiment

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.178, pp.148-153, 2006 (Journal Indexed in SCI) identifier identifier

Physical and numerical analysis of three dimensional extrusion process

COMPUTATIONAL MATERIALS SCIENCE, vol.31, pp.113-124, 2004 (Journal Indexed in SCI) identifier identifier

A new technique used in obtaining true stress - True strain curves for constant strain-rates

EXPERIMENTAL TECHNIQUES, vol.27, no.2, pp.35-37, 2003 (Journal Indexed in SCI) identifier identifier

Determination of friction coefficient encountered in large deformation processes

TRIBOLOGY INTERNATIONAL, vol.35, no.1, pp.27-34, 2002 (Journal Indexed in SCI) identifier identifier

Determination of friction coefficient by employing the ring compression test

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.123, no.3, pp.338-348, 2001 (Journal Indexed in SCI) identifier identifier

Flow behavior of Plasticine used in physical modeling of metal forming processes

TRIBOLOGY INTERNATIONAL, vol.33, no.8, pp.523-529, 2000 (Journal Indexed in SCI) identifier identifier

On the measurement of friction coefficient utilizing the ring compression test

TRIBOLOGY INTERNATIONAL, vol.32, no.6, pp.327-335, 1999 (Journal Indexed in SCI) identifier identifier

3-DIMENSIONAL ANALYSIS OF EXTRUSION PROCESS UTILIZING THE PHYSICAL MODELING TECHNIQUE

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.115, no.1, pp.32-40, 1993 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Effects of Process Parameters on Copper PowderCompaction Process Using Multi-Particle FiniteElement Method

IOP Conference Series: Materials Science and Engineering, vol.295, 2018 (Refereed Journals of Other Institutions)

MİKRO İMALAT YÖNTEMİYLE YÜZEY ŞEKİLLENDİRMENİN DENTAL İMPLANT UYGULAMALARINDAKİ OSSEOİNTEGRASYONA ETKİSİ

Süleyman Demirel Üniversitesi Mühendislik Bilimleri ve Tasarım Dergisi, vol.2, no.3, pp.221-227, 2014 (National Refreed University Journal)

Hasarlı Çene Kemiklerinde Abutment Boyunun Dental İmplant Sistemi Üzerindeki Etkileri

SÜLEYMAN DEMİREL ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ DERGİSİ, vol.18, pp.102-110, 2014 (National Refreed University Journal)

Alt Çene Kemiğindeki Hasarın Abutment Boyu ve Protez Dolgu Malzemesi Kullanılarak Giderilmesinin Mandibula Üzerindeki Etkileri

Süleyman Demirel Üniversitesi Mühendislik Bilimleri ve Tasarım Dergisi, vol.2, no.3, pp.211-219, 2014 (National Refreed University Journal)

Noktasal Yükleme Etksindeki Üç Boyutlu İnsan Kalça Ekleminin Sonlu Elemanlar Yöntemiyle İncelenmesi

Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.16, no.3, pp.303-314, 2012 (National Refreed University Journal)

Yayılı Yükleme Etksindeki Üç Boyutlu İnsan Kalça Ekleminin Sonlu Elemanlar Yöntemiyle İncelenmesi

Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.16, no.3, pp.377-387, 2012 (National Refreed University Journal)

Refined non-conforming five-node thin flat shell element

International Journal of Engineering and Applied Sciences, vol.1, no.2, pp.16-32, 2009 (National Refreed University Journal)

Sabit ve Dinamik Yük Altında Çalışan Boru Bağlantılarındaki Sürtünme Katsayısının Değişimi

TÜBİTAK-Türk Mühendislik ve Çevre Bilimleri Dergisi, vol.22, pp.269-277, 1998 (Other Refereed National Journals)

Refereed Congress / Symposium Publications in Proceedings

Sonlu Elemanlar Yöntemi Kullanılarak Yeni Bir TME Protezi Tasarımı: Modüler Pimli Hibrit Protez

Uluslararası Diş Hekimliği ve Sağlık Kongresi-IDU-DENT 2020, 28 - 29 November 2020

Experimental and Numerical Investigation of Thickness Distribution in Forming of Superplastic Zn-22Al Alloy

6th International Symposium on Innovative Technologies in Engineering and Science (ISITES2018), Antalya, Turkey, 9 - 11 November 2018, pp.1034-1040

Zn-22Al Alaşımının Mikro Derin Çekilebilirliğine Zımba Hızının Etkisinin İncelenmesi

1 st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Turkey, 22 - 24 March 2018, pp.465-466

Effects of Process Parameters on Copper Powder Compaction Process Using Multi-Particle Finite Element Method

9th International Conference on Tribology (Balkantrib), Turkey, 13 - 15 September 2017, vol.295 Creative Commons License identifier identifier

EFFECT OF GRAIN SIZE ON MICROHARDNESS OF SUPERPLASTIC ZN22AL ALLOY

International Conference on Engineering Technologies (ICENTE’17), Konya, Turkey, 07 December 2017 - 09 January 2018, pp.65

EFFECT OF GRAIN SIZE ON MICROHARDNESS OF SUPERPLASTIC ZN22AL ALLOY

International Conference on Engineering Technologies (ICENTE’17), Konya, Turkey, 07 December 2017 - 09 January 2018, pp.65

Experimental investigations on particle erosion behavior of AA 6061 alloy

9th Anakara International Aeropace Conference, Ankara, Turkey, 20 - 22 September 2017, pp.1-10

AA 6013 Alaşımının Halka Basma Testi ve Sonlu Elemanlar Analizi

20. ULUSAL MEKANİK KONGRESİ, Bursa, Turkey, 5 - 09 September 2017, pp.427-435

Numerical Investigation of Coefficient of Friction in Copper Powder Compaction Process at Micro Scale

7th International Conference on Mechanical and Aerospace Engineering (ICMAE), London, Canada, 18 - 20 July 2016, pp.127-131 identifier identifier

Metal Tozu Presleme Prosesinde Malzeme Modeli ve Sürtünme Etkisinin Sonlu Elemanlar Yöntemi ile Analizi

Seventh International Powder Metalurgy Conference and Exhibiton, Ankara, Turkey, 26 - 28 June 2014, pp.1-10

Discrete Element Modeling of Spherical Copper Powder Compaction Process

International Porous and Powder Materials Symposium and Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.1-10

Soğuk Toz Presleme Prosesinin Ayrık Sonlu Eleman Analizi

MSC Software Türkiye konferansı, İstanbul, Turkey, 27 - 28 May 2013, pp.1-10

Noktasal Yükleme Etkisindeki İnsan Kalça Ekleminin Sonlu Elemanlar Yöntemiyle İncelenmesi

Uluslar arası Katılımlı 6. Biyomekanik Kongresi, Sakarya, Turkey, 27 - 29 September 2012, pp.1-10

Yayılı Yükleme Etkisindeki İnsan Kalça Ekleminin Sonlu Elemanlar Yöntemiyle İncelenmesi

Uluslar arası Katılımlı 6. Biyomekanik Kongresi, Sakarya, Turkey, 27 - 29 September 2012, pp.1-10

Kemik Yoğunluğunun Dental İmplantlardaki Gerilme Dağılımına Etkisi

17. Ulusal Mekanik Kongresi, Elazığ, Turkey, 6 - 09 September 2011, pp.1-10

Mikro Kanallı Kaymalı Yatakların Dinamik Yük Altındaki Performansının İncelenmesi

V. Makina Tasarım ve İmalat Teknolojileri Kongresi, Konya, Turkey, 17 - 18 October 2009, pp.1-10

Refined 5-Node Transition Plate Bending Element Based On Kirchhoff Plate Theory

Ninth International Conference on Computational Structures Technology, Athens, Greece, 2 - 05 September 2008, vol.88, pp.1-10

A refined five-node transition plate bending element based on Kirchhoff plate theory

9th International Conference on Computational Structures Technology, CST 2008, Athens, Greece, 2 - 05 September 2008, vol.88 identifier

Thermomechanical Analysis Of Elastic-Plastic Semi-Infinite Medium in Sliding Contact with Fractal Surface

15th UK Conference of Association of the Computational Mechanics in Engineering, Glasgow, United Kingdom, 2 - 03 April 2007, vol.85, pp.1-10

Mikro Kanallı Kaymalı Yatakların Statik Yük Altındaki Performansının İncelenmesi

III. Makina Tasarım ve İmalat Teknolojileri Kongresi, Konya, Turkey, 16 - 17 September 2005, pp.183-193

Fraktal Yüzey ile Kayma Teması Yapan Elastik-Plastik Yarı-Sonsuz Ortamın Termomekanik Analizi

XV. Ulusal Isı Bilimi ve Tekniği, Trabzon, Turkey, 7 - 09 September 2005, pp.209-216

Application of Physical Modeling Technique to Extrusion Processes

4th International Conference on Tribology, İstanbul, Turkey, 12 - 14 June 2002, vol.1, pp.222-229

İki Boyutlu Ekstrüzyon Prosesinin Model Malzeme Kullanılarak Simulasyonu

XII. Ulusal Mekanik Kongresi, Konya, Turkey, 10 - 14 September 2001, pp.669-678

On the Measurement of Friction Coefficient Utilizing the Ring Compression Test II-Effect of Deformation Speed, Strain Rate and Barreling

Engineering Systems Design and Analysis Conference, PD, Montpellier, France, 1 - 04 July 1996, vol.75, no.3, pp.189-197

Metal Şekil Verme Proseslerini Modellemede Kullanılan Bir Model Malzemesi: Plasticine

Birinci Ulusal Deneysel Mekanik Sempozyumu, İstanbul, Turkey, 28 - 30 September 1994, pp.259-267

On the Measurement of Friction Coefficient Utilizing the Ring Compression Test I-Effect of Material Properties

Engineering Systems Design and Analysis Conference,PD, London, United Kingdom, 4 June - 07 July 1994, vol.64, pp.55-61

On the measurement of friction coefficient utilizing the ring compression test: Part I - Effect of material properties

Proceedings of the 2nd Biennial European Joint Conference on Engineering Systems Design and Analysis. Part 1 (of 8), London, Canada, 4 - 07 July 1994, vol.64, pp.55-61 identifier

Metal Şekil Verme Proseslerinin Analizinde Yeni Bir Yöntem

Altıncı Ulusal Makina Teorisi Sempozyumu, Trabzon, Turkey, 15 - 17 September 1993, pp.603-610

Three-Dimensional Analysis of Extrusion Process by Utilizing the Physical Modeling Technique

Engineering Systems Design and Analysis Conference, PD, İstanbul, Turkey, 29 June - 03 July 1992, vol.47, no.1, pp.377-386

Flow Characteristic of Various Types of Plasticine Used in Physical Modeling of Large Deformation Processes

Society for Experimental Mechanics Spring Conference on Experimental Mechanics, Albuquerque, United States Of America, 4 - 06 June 1990, pp.34-43

ON THE VALIDITY OF PLASTICINE AS A MODELING MEDIUM FOR SIMULATION OF METAL-FORMING PROCESSES

1990 SPRING CONF OF THE SOC FOR EXPERIMENTAL MECHANICS, New Mexico, United States Of America, 4 - 06 June 1990, pp.638-639 identifier

FLOW CHARACTERISTICS OF VARIOUS TYPES OF PLASTICINE USED IN PHYSICAL MODELING OF LARGE DEFORMATION PROCESSES

1990 SPRING CONF OF THE SOC FOR EXPERIMENTAL MECHANICS, New Mexico, United States Of America, 4 - 06 June 1990, pp.34-43 identifier