Prof. Dr. VOLKAN KAHYA

ALTUNIŞIK A. C., KAHYA V., Yetişken A.

Uludağ University Journal of The Faculty of Engineering , cilt.26, sa.3, ss.1021-1034, 2021 (Hakemli Dergi)

23. Design of series tuned mass dampers for seismic control of structures using simulated annealing algorithm

Araz O., KAHYA V.

ARCHIVE OF APPLIED MECHANICS , cilt.91, ss.4343-4359, 2021 (SCI-Expanded)

24. Experimental study on annular cylindrical tuned liquid dampers for vibration control under different excitation angles

Journal of Structural Engineering & Applied Mechanics , cilt.4, sa.3, ss.163-183, 2021 (Hakemli Dergi)

25. Assessment of modal characteristics of cross-laminated timber beams subject to successive damages

GENÇ A. F., KAHYA V., ALTUNIŞIK A. C., GÜNAYDIN M., DEMİRKIR C.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.21, sa.3, 2021 (SCI-Expanded, Scopus)

26. Damage Localization in Laminated Composite Beams with Multiple Edge Cracks Based on Vibration Measurements

KAHYA V., Karaca S., OKUR F. Y., ALTUNIŞIK A. C., ASLAN M.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING , cilt.45, sa.1, ss.75-87, 2021 (SCI-Expanded)

27. Free vibration and buckling analysis of functionally graded sandwich beams by Navier's method

Turan M., KAHYA V.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.2, ss.743-757, 2021 (SCI-Expanded)

28. Free vibration analysis and damage localization in tapered beams with cracks using finite element method

KAHYA V., ŞİMŞEK S., Gunes S. D.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.2, ss.841-854, 2021 (SCI-Expanded)

29. Optimal Sensor Placement for Laminated Composite and Steel Cantilever Beams by the Effective Independence Method

SUNCA F., Okur F. Y., Altunisik A. C., Kahya V.

STRUCTURAL ENGINEERING INTERNATIONAL , cilt.31, sa.1, ss.85-92, 2021 (SCI-Expanded)

30. Use of trigonometric series functions in free vibration analysis of laminated composite beams

Turan M., Kahya V.

Challenge Journal of Structural Mechanics , cilt.6, sa.2, ss.61-67, 2020 (Hakemli Dergi)

31. Series tuned mass dampers in vibration control of continuous railway bridges

Araz O., KAHYA V.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.73, sa.2, ss.133-141, 2020 (SCI-Expanded)

32. A simple design method for multiple tuned mass dampers in reduction of excessive vibrations of high-speed railway bridges

ALTUNIŞIK A. C., Yetişken A., KAHYA V.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.2, ss.607-618, 2020 (SCI-Expanded)

33. Shear-deformable finite element for free vibrations of laminated composite beams with arbitrary lay-up

KAHYA V., Karaca S., VO T. P.

STEEL AND COMPOSITE STRUCTURES , cilt.33, sa.4, ss.473-487, 2019 (SCI-Expanded)

34. Annular Cylindrical Liquid Column Dampers for Control of Structural Vibrations

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING , cilt.43, sa.3, ss.479-490, 2019 (SCI-Expanded)

35. Free vibrations of laminated composite beams with multiple edge cracks: Numerical model and experimental validation

KAHYA V., Karaca S., OKUR F. Y., ALTUNIŞIK A. C., ASLAN M.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.159, ss.30-42, 2019 (SCI-Expanded)

36. Vibrations of a Box-Sectional Cantilever Timoshenko Beam with Multiple Cracks

INTERNATIONAL JOURNAL OF STEEL STRUCTURES , cilt.19, sa.2, ss.635-649, 2019 (SCI-Expanded)

37. A SEQUENTIAL APPROACH BASED DESIGN OF MULTIPLE TUNED MASS DAMPERS UNDER HARMONIC EXCITATION

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.37, sa.1, ss.225-239, 2019 (ESCI)

38. Vibration-based damage detection in beam structures with multiple cracks: modal curvature vs. modal flexibility methods

ALTUNIŞIK A. C., OKUR F. Y., Karaca S., KAHYA V.

NONDESTRUCTIVE TESTING AND EVALUATION , cilt.34, sa.1, ss.33-53, 2019 (SCI-Expanded)

39. Effects of manufacturing type on control performance of multiple tuned mass dampers under harmonic excitation

Journal of Structural Engineering & Applied Mechanics , cilt.1, sa.3, ss.117-127, 2018 (Hakemli Dergi)

40. Vibration and buckling of laminated beams by a multi-layer finite element model

KAHYA V., Turan M.

STEEL AND COMPOSITE STRUCTURES , cilt.28, sa.4, ss.415-426, 2018 (SCI-Expanded)

41. Vibration and stability analysis of functionally graded sandwich beams by a multi-layer finite element

KAHYA V., Turan M.

COMPOSITES PART B-ENGINEERING , cilt.146, ss.198-212, 2018 (SCI-Expanded)

42. Free Vibration of Cracked Cantilever Beams: Analytical and Experimental Modelling

ALTUNIŞIK A. C., YETISKEN A., KAHYA V.

Fırat University Turkish Journal of Science & Technology , cilt.13, sa.1, ss.1-7, 2018 (Hakemli Dergi)

43. Experimental study on control performance of tuned liquid column dampers considering different excitation directions

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.102, ss.59-71, 2018 (SCI-Expanded)

44. Stress intensity factors for cracked elastic beams subjected to moving loads

KAHYA V., Karaca S.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.33, sa.4, ss.1309-1319, 2018 (SCI-Expanded)

45. Plane receding contact problem for a functionally graded layer supported by two quarter-planes

ÇÖMEZ İ., KAHYA V., Erdol R.

ARCHIVES OF MECHANICS , cilt.70, sa.6, ss.485-504, 2018 (SCI-Expanded)

46. Fonksiyonel Derecelendirilmiş Kirişlerin Navier Methodu ile Serbest Titreşim Analizi

KARADENİZ FEN BİLİMLERİ DERGİSİ , 2018 (Hakemli Dergi)

47. Automated model updating of multiple cracked cantilever beams for damage detection

Journal of Constructional Steel Research , cilt.138, ss.499-512, 2017 (SCI-Expanded)

48. Structural identification of a cantilever beam with multiple cracks: Modeling and validation

Altumsik A. C., OKUR F. Y., KAHYA V.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.130, ss.74-89, 2017 (SCI-Expanded)

49. Bending of Laminated Composite Beams by a Multi-Layer Finite Element Based on a Higher-Order Theory

KAHYA V., TURAN M.

ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.473-475, 2017 (SCI-Expanded)

50. Modal parameter identification and vibration based damage detection of a multiple cracked cantilever beam

ENGINEERING FAILURE ANALYSIS , cilt.79, ss.154-170, 2017 (SCI-Expanded)

51. Series tuned mass dampers in train-induced vibration control of railway bridges

STRUCTURAL ENGINEERING AND MECHANICS , cilt.61, sa.4, ss.453-461, 2017 (SCI-Expanded)

52. Finite element model for vibration and buckling of functionally graded beams based on the first-order shear deformation theory

KAHYA V., TURAN M.

COMPOSITES PART B-ENGINEERING , cilt.109, ss.108-115, 2017 (SCI-Expanded)

53. Receding contact problem for two-layer functionally graded media indented by a rigid punch

ÇÖMEZ İ., El-Borgi S., KAHYA V., Erdol R.

ACTA MECHANICA , cilt.227, sa.9, ss.2493-2504, 2016 (SCI-Expanded)

54. Axisymmetric analysis of a functionally graded layer resting on elastic substrate

TURAN M., ADIYAMAN G., KAHYA V., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.58, sa.3, ss.423-442, 2016 (SCI-Expanded)

55. Buckling analysis of laminated composite and sandwich beams by the finite element method

COMPOSITES PART B-ENGINEERING , cilt.91, ss.126-134, 2016 (SCI-Expanded)

56. Dynamic analysis of pre-stressed elastic beams under moving mass using different beam models

ÖZŞAHİN T. Ş., KAHYA V., BİRİNCİ A., ÇAKIROĞLU A. O.

CHALLENGE JOURNAL OF STRUCTURAL MECHANICS , cilt.1, sa.3, ss.106-116, 2015 (Hakemli Dergi)

57. RESONANT VIBRATIONS OF TWO-SPAN RAILWAY BRIDGES UNDER HIGH-SPEED TRAINS

KAHYA V., Araz O., TURAN M.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.33, sa.2, ss.188-199, 2015 (ESCI)

58. Damages on reinforced concrete buildings due to consecutive earthquakes in Van

ATEŞ Ş., KAHYA V., Yurdakul M., ADANUR S.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING , cilt.53, ss.109-118, 2013 (SCI-Expanded)

59. Finite element dynamic analysis of laminated composite beams under moving loads

Kahya V.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.42, sa.5, ss.729-745, 2012 (SCI-Expanded)

60. Dynamic analysis of laminated composite beams under moving loads using finite element method

Kahya V.

NUCLEAR ENGINEERING AND DESIGN , cilt.243, ss.41-48, 2012 (SCI-Expanded)

61. Dynamic analysis of composite sandwich beams under moving mass

KAHYA V., Mosallam A.

Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi , cilt.14, sa.1, ss.18-25, 2011 (Hakemli Dergi)

62. A receding contact problem for an anisotropic elastic medium consisting of a layer and a half plane

Kahya V., Ozsahin T. Ş., Birinci A., Erdol R.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.44, sa.17, ss.5695-5710, 2007 (SCI-Expanded)

63. Contact Problem for an Elastic Layered Composite Resting on Rigid Flat Supports

International Journal of Civil and Environmental Engineering , cilt.1, sa.1, ss.21-26, 2007 (Hakemli Dergi)

64. Frictionless Contact Problem between two Orthotropic Elastic Layers

KAHYA V., BİRİNCİ A., Erdol R.

International Journal of Civil and Environmental Engineering , cilt.1, sa.1, ss.21-26, 2007 (Hakemli Dergi)

65. Partial closure of a crack located in an anisotropic infinite elastic layer

Kahya V., Birinci A., Ozsahin T. Ş., Erdol R.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS , cilt.25, sa.5, ss.819-833, 2006 (SCI-Expanded)

66. Frictionless contact problem between an elastic layer bonded to a rigid support and a rigid stamp

KAHYA V., BİRİNCİ A., Erdöl R.

Mathematical and Computational Applications , cilt.6, sa.1, ss.13-22, 2001 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 79

1. Effect of cracks on dynamic behavior of stepped beams with general boundary conditions

Sevilmiş E., Kahya V., Şimşek S.

4th International Civil Engineering & Architecture Conference (ICEARC'25), Trabzon, Türkiye, 17 - 19 Mayıs 2025, ss.2242-2248, (Tam Metin Bildiri)

2. Structural health monitoring through vibration-based feature extraction and machine learning: a comparative study of AR, VAR, and SVD methods

Alhasan M., Kahya V., Hacıefendioğlu K., Şimşek S.

4th International Civil Engineering & Architecture Conference (ICEARC'25), Trabzon, Türkiye, 17 - 19 Mayıs 2025, ss.2012-2031, (Tam Metin Bildiri)

3. Comparative analysis of optimization algorithms for vibration- based damage detection in laminated composite beams

Şimşek S., Kahya V.

4th International Civil Engineering & Architecture Conference (ICEARC'25), Trabzon, Türkiye, 17 - 19 Mayıs 2025, ss.2366-2376, (Tam Metin Bildiri)

4. Comparative analysis of vision-based vibration identification techniques using digital camera imaging

Gençcelep S., Kahya V., Hacıefendioğlu K., Şimşek S., Aslan T.

4th International Civil Engineering & Architecture Conference (ICEARC'25), Trabzon, Trabzon, Türkiye, 17 - 19 Mayıs 2025, ss.2109-2118, (Tam Metin Bildiri)

5. Assessment of modal-based damage indicators in high-noise conditions: An application to laminated composite beams

Şimşek S., Kahya V., Toğan V., Altunışık A. C.

International Civil Engineering and Architecture Conference, Trabzon, Türkiye, 12 - 14 Ekim 2023, ss.1126-1139, (Tam Metin Bildiri)

6. Damage detection of truss structures via a combined SAP2000 OAPI and teaching-learning-based optimization

Sepil L. D., Özgan K., Şimşek S., Kahya V.

International Civil Engineering and Architecture Congress, Trabzon, Türkiye, 12 - 14 Ekim 2023, ss.1283-1298, (Tam Metin Bildiri)

7. Design phases and effectiveness of tuned liquid damper and tuned liquid column damper in seismic induced vibration

Idriss B. A., SUNCA F., GÜNAYDIN M., ALTUNIŞIK A. C., KAHYA V.

Proceedings of 3rd International Civil Engineering and Architecture Congress, Türkiye, 12 Ekim 2023, (Tam Metin Bildiri)

8. Deprem Etkisindeki Yüksek Katlı Yapılardaki Titreşimlerin Ayarlı Kütle Sönümleyici Kullanılarak Azaltılması

22. ULUSAL MEKANİK KONGRESİ 06 - 10 Eylül 2021, Çukurova Üniversitesi, Adana, Türkiye, 6 - 10 Eylül 2021, (Tam Metin Bildiri)

9. Ekseni Doğrultusunda Fonksiyonel Derecelendirilmiş Kirişlerin Sonlu Elemanlar Metoduyla Burkulma Analizi

22. ULUSAL MEKANİK KONGRESİ 06 - 10 Eylül 2021, Çukurova Üniversitesi, Adana, Türkiye, 6 - 10 Eylül 2021, (Tam Metin Bildiri)

10. Armoni Arama Algoritması Kullanılarak Tabakalı Kompozit Kirişte Frekans Değişimlerine Dayalı Hasar Tespiti

22. ULUSAL MEKANİK KONGRESİ 06 - 10 Eylül 2021, Çukurova Üniversitesi, Adana, Türkiye, 6 - 10 Eylül 2021, (Tam Metin Bildiri)

11. Experimental investigation of optimal sensor placement of a laminated composite cantilever beam

SUNCA F., OKUR F. Y., ALTUNIŞIK A. C., KAHYA V.

International Congress on the Phenomenological Aspects of Civil Engineering, Erzurum, Türkiye, 20 - 23 Haziran 2021, (Tam Metin Bildiri)

12. Free Vibration Analysis of Layered Composite Beams with Delamination Damage

II. International Conference on Innovative Engineering Applications (CIEA’ 2021), 20-22 May 2021, Muş, Turkey, Muş, Türkiye, 20 - 22 Mayıs 2021, (Tam Metin Bildiri)

13. Delaminasyon Hasarı Bulunan Tabakalı Kompozit Kirişlerin Serbest Titreşim Analizi

II. International Conference on Innovative Engineering Applications (CIEA’ 2021), 20-22 May 2021, Muş, Turkey, Muş, Türkiye, 20 - 22 Mayıs 2021, (Tam Metin Bildiri)

14. Damage localization in laminated composite beams using modal data

KAHYA V., ŞİMŞEK S., ALTUNIŞIK A. C., OKUR F. Y., ASLAN M.

IES’20 International Engineering Symposium, Engineering Applications in Industry (Virtual), İzmir, Türkiye, 05 Aralık 2020, ss.9-19, (Tam Metin Bildiri)

15. Use of Trigonometric Series Functions in Free Vibration Analysis of Laminated Composite Beams

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.951-958, (Tam Metin Bildiri)

16. Buckling Analysis of Laminated Composite Beams by Navier Method

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.959-966, (Tam Metin Bildiri)

17. HASARLI KONIK KIRIŞLERIN SERBEST TITREŞIM ANALIZI IÇIN BIR SONLU ELEMAN MODELI

TUMTMK 21. Ulusal Mekanik Kongresi, Türkiye, 2 - 06 Eylül 2019, (Tam Metin Bildiri)

18. Non-Traditional Tuned Mass Dampers for Harmonically Excided Damped System

3rd International Conference on AdvancedEngineering Technologies, 19 - 21 Eylül 2019, (Tam Metin Bildiri)

19. Optimum Non-Traditional Tuned Mass Dampers for Harmonically ExcitedUndamped System

3rd International Conference on AdvancedEngineering Technologies, 19 - 21 Eylül 2019, (Tam Metin Bildiri)

20. HASARLI KONİK KİRİŞLERİN SERBEST TİTREŞİM ANALİZLERİ İÇİN BİR SONLU ELEMAN MODELİ

TUMTMK 21. ULUSAL MEKANİK KONGRESİ, Niğde, Türkiye, 2 - 06 Eylül 2019, ss.887-897, (Tam Metin Bildiri)

21. Multilayered Finite Element for Free Vibration Analysis of Functionally Graded Sandwich Beams

KAHYA V., TURAN M.

International Civil Engineering and Architecture Conferance, Trabzon, Türkiye, 17 - 20 Mayıs 2019, cilt.1, ss.908-918, (Tam Metin Bildiri)

22. FREE VIBRATIONS OF LAMINATED COMPOSITE BEAMS WITH ARBITRARY LAY-UP USING FINITE ELEMENT METHOD

KAHYA V., ŞİMŞEK S., Vo T. P.

International Civil Engineering and Architecture Conference (ICEARC 2019), Trabzon, Türkiye, 17 - 20 Nisan 2019, cilt.1, ss.976-989, (Tam Metin Bildiri)

23. PERFORMANCE ASSESSMENT OF MULTIPLE TUNED MASS DAMPERS IN VIBRATION CONTROL OF CONTINUOUS RAILWAY BRIDGES

International Civil Engineering and Architecture Conference 2019, 17 - 20 Nisan 2019, (Tam Metin Bildiri)

24. DETERMINATION OF IMPACT FACTOR FOR SINGLE-SPAN RAILWAY BRIDGES

International Civil Engineering and Architecture Conference 2019, 17 - 20 Nisan 2019, (Tam Metin Bildiri)

25. Localization of Open Transverse Cracks in Laminated Composite Beams Based on Modal Data

KAHYA V., ŞİMŞEK S., ALTUNIŞIK A. C., OKUR F. Y., ASLAN M.

International Congress on Engineering and Architecture, Alanya, Türkiye, 14 - 16 Kasım 2018, (Tam Metin Bildiri)

26. Finite Element Model for Free Vibration Analysis of Tapered Elastic Beams with Multiple Cracks

International Congress on Engineering and Architecture, Antalya, Türkiye, 14 - 16 Kasım 2018, ss.59-69, (Tam Metin Bildiri)

27. Finite Element for Free Vibration Analysis of Tapered Beams

International Conference on Innovative Engineering Applications, Sivas, Türkiye, 20 - 22 Eylül 2018, (Tam Metin Bildiri)

28. Natural Frequency Analysis of Laminated Composite Beams with Multiple Open Transverse Cracks

KAHYA V., ŞİMŞEK S., OKUR F. Y., ALTUNIŞIK A. C., ASLAN M.

International Conference on Innovative Engineering Applications, Sivas, Türkiye, 20 - 22 Eylül 2018, ss.327-334, (Tam Metin Bildiri)

29. A Finite Element for Free Vibration Analysis of Tapered Beams

International Conference on Innovative Engineering Applications, Sivas, Türkiye, 20 - 22 Eylül 2018, ss.286-292, (Tam Metin Bildiri)

30. Dynamic response of a Timoshenko beam subjected to a series of moving loads

ASCE 5th International Engineering and Construction Conference (IECC’5), Irvine, Birleşik Krallık, 27 - 29 Ağustos 2008, ss.59-68, (Tam Metin Bildiri)

31. Optimization of Tuned Mass Dampers Using Pattern Search Algorithm

International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.1609-1619, (Tam Metin Bildiri)

32. Optimum Design of Tuned Mass Damper with Consideration of Stroke

International Conference on Innovative Engineering Applications, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.602, (Özet Bildiri)

33. Free Vibration Analysis of Functionally Graded Beams by Navier Method

Turan M., KAHYA V.

International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.597, (Özet Bildiri)

34. Characterization Of Glass Fiber Reinforced Polyester Composites Produced By Pultrusion Process

ASLAN M., Ezzatkhah A., KAHYA V., ALTUNIŞIK A. C., Kayhan M.

International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.460, (Özet Bildiri)

35. Damage Localization in Steel Cantilever Beams with Multiple Cracks Using Modal Characteristics

ALTUNIŞIK A. C., Yetişken A., KAHYA V.

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, Prag, Çek Cumhuriyeti, 18 - 22 Haziran 2018, (Özet Bildiri)

36. Finite Element Model for Anisotropic Laminated Composite Beams

ŞİMŞEK S., KAHYA V.

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, Prag, Çek Cumhuriyeti, 18 - 22 Haziran 2018, (Özet Bildiri)

37. Damage detection of a multiple cracked cantilever beam

ALTUNIŞIK A. C., OKUR F. Y., KAHYA V., KARACA S.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.75-82, (Tam Metin Bildiri)

38. Experimental study on control performance of tuned liquid column dampers considering different excitation directions

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.83-94, (Tam Metin Bildiri)

39. Tabakalı kompozit kirişlerin sonlu elemanlar metoduyla statik analizi

ALTUNIŞIK A. C., YETISKEN A., KAHYA V.

II. International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1358, (Tam Metin Bildiri)

40. Titreşim kontrolünde sıvı sütunlu sönümleyicilerin deneysel değerlendirilmesi

II. International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1619, (Özet Bildiri)

41. Demiryolu köprülerinin titreşim kontrolünde ayarlı kütle sönümleyiciler için yeni bir tasarım

II. International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1595, (Özet Bildiri)

42. Tabakalı kompozit kirişlerin Navier metoduyla statik analizi

II. International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1454, (Özet Bildiri)

43. Fonksiyonel dereceli kirişlerin sonlu elemanlar metoduyla statik analizi

20. Ulusal Mekanik Kongresi, Bursa, Türkiye, 5 - 09 Eylül 2017, ss.562-569, (Tam Metin Bildiri)

44. A FINITE ELEMENT MODEL FOR ANISOTROPIC LAMINATED COMPOSITE BEAMS

ŞİMŞEK S., KAHYA V.

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, Prag, Çek Cumhuriyeti, 12 - 16 Haziran 2017, ss.368, (Özet Bildiri)

45. Free vibration of cracked cantilever beams: Analytical and experimental modelling

KAHYA V., KARACA S.

International Conference on Advances and Innovations in Engineering, Elazığ, Türkiye, 10 - 12 Mayıs 2017, ss.695-700, (Tam Metin Bildiri)

46. Optimal design of multiple tuned mass dampers based on Den Hartog's method

International Conference on Advances and Innovations in Engineering, Elazığ, Türkiye, 10 - 12 Mayıs 2017, ss.690-694, (Tam Metin Bildiri)

47. Free vibration and buckling analysis of functionally graded beams by finite element method

KAHYA V., Turan M.

International Conference on Advances and Innovations in Engineering, Elazığ, Türkiye, 10 - 12 Mayıs 2017, ss.701-706, (Tam Metin Bildiri)

48. Optimal design of multiple tuned mass dampers based on Den Hartog’xxs method

ALTUNIŞIK A. C., Okur F. Y., KAHYA V.

International Conference on Advances and Innovations in Engineering, 10 - 12 Mayıs 2017, (Tam Metin Bildiri)

49. Analytical, numerical and experimental investigation of a box-sectional cantilever beam with multipe cracks

ICOCEE - Cappadocia 2017, 8 - 10 Mayıs 2017, (Tam Metin Bildiri)

50. Analytical, numerical and experimantal investigation of a box-sectional cantilever beam with multiple cracks

2nd International Conference on Civil and Environmental Engineering, Nevşehir, Türkiye, 8 - 10 Mayıs 2017, ss.2131-2140, (Tam Metin Bildiri)

51. Bending of laminated composite beams by a multi-layer finite element based on a higher-order theory

Turan M., KAHYA V.

3rd International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 19 - 24 Ekim 2016, ss.299, (Özet Bildiri)

52. Series multiple tuned mass dampers for vibration control of high-speed railway bridges

6th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2016, Cape-Town, Güney Afrika, 5 - 07 Eylül 2016, ss.143-148, (Tam Metin Bildiri)

53. Vibration and buckling of laminated composite and sandwich beams with a shear-deformable layered finite element