Published journal articles indexed by SCI, SSCI, and AHCI
The effects of sheet and network solid structures of similar TPMS scaffold architectures on permeability, wall shear stress, and velocity: A CFD analysis
MEDICAL ENGINEERING AND PHYSICS
, vol.2023, no.119, pp.104024, 2023 (SCI-Expanded)
Biomechanical Behavior of Diamond Lattice Scaffolds Obtained by Two Different Design Approaches with Similar Porosity; A Numerical Investigation with FEM and CFD Analysis
Proceedings Of The Institution Of Mechanical Engineers Part H-Journal Of Engineering In Medicine
, vol.56, no.4, pp.120-135, 2022 (SCI-Expanded)
The Effect of Al and Ti Transition Metals on the Wear Resistance of Ceramic Based CrN Coatings; Investigation under Ambient Air and Vacuum Conditions
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
, vol.236, no.3, pp.455-472, 2022 (SCI-Expanded)
Protein adsorption, cell viability and corrosion properties of Ti6Al4V alloy treated by plasma oxidation and anodic oxidation
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
, vol.27, no.9, pp.1269-1280, 2020 (SCI-Expanded)
THE EFFECT OF TiN, TiAlN, CrAlN, AND TiAlN/TiSiN COATINGS ON THE WEAR PROPERTIES OF AISI H13 STEEL AT ROOM TEMPERATURE
Surface Review And Letters
, vol.26, no.9, pp.1950063, 2018 (SCI-Expanded)
Effects of process parameters on the wear properties of plasma nitrided Inconel 718 alloy
METAL SCIENCE AND HEAT TREATMENT
, pp.152-161, 2016 (SCI-Expanded)
Articles Published in Other Journals
The effect of build direction on component strength in SLA-based additive manufacturing
Challenge Journal of Structural Mechanics
, vol.10, no.3, pp.95-100, 2024 (Peer-Reviewed Journal)
THE NOVELTY DESIGN METHOD IN LIGHTWEIGHT STRUCTURES WITH LOW EFFECTIVE ELASTIC MODULUS
Challenge Journal of Structural Mechanics
, vol.10, no.2, pp.47-57, 2024 (Peer-Reviewed Journal)
Numerical investigation of the effective mechanical properties of Octet Truss lattice structures with different strut geometry
Challenge Journal of Structural Mechanics
, vol.9, no.4, pp.133-144, 2023 (Peer-Reviewed Journal)
Anodizasyon ve Elektriksel Boşalma Plazma Oksidasyon Yüzey İşlemlerinin Ti6Al4V Alaşımının Aşınma Direncine Etkisi
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi
, vol.12, no.4, pp.189-201, 2020 (Peer-Reviewed Journal)
Effect of Plate Configuration on Resistance in Mandibular Angle Fractures
International Dental Research
, vol.10, no.1, pp.6-11, 2020 (Peer-Reviewed Journal)
’Investigation of Mechanical and Wear Properties of Five (5) Different CAD/CAM Restorative Materials
El-Cezerî Journal of Science and Engineering
, vol.7, no.1, pp.57-66, 2020 (Scopus)
Gözenekli Yapıya Sahip Kalça Protezi Tasarımı ve Uyluk Kemiği Üzerinde Sonlu Elemanlar Analizi
Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
, vol.12, no.1, pp.95-105, 2019 (Peer-Reviewed Journal)
Analysis Of Hip Prosthesis Production With Forging Using The Finite Element Method
Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
, no.8, pp.69-87, 2015 (Peer-Reviewed Journal)
Biomechanical Analysis of Ultra-Fine Grained Titanium Dental Implant With Different Geometries
Archive of Applied Science Research
, vol.7, no.9, pp.1-5, 2015 (Peer-Reviewed Journal)
Stress Distribution in a MOD inlay cavity restored with different ceramics: A Finite Elemet Analysis
Journal of Restorative Dentistry
, no.77, pp.57-58, 2014 (Peer-Reviewed Journal)
Tibia Kırıklarında Kullanılan Kilitli ve Kilitsiz Plak Fiksasyon Sistemlerinin Sonlu Elemanlar Yöntemiyle İncelenmesi
SÜLEYMAN DEMİREL ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ DERGİSİ
, no.18, pp.167-174, 2014 (Peer-Reviewed Journal)
Radius kırıklarında plak fiksasyonu ve interamedüller çivileme yöntemlerinin teorik olarak incelenmesi
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi
, no.16, pp.330-336, 2012 (Peer-Reviewed Journal)
Çene Kırıklarında Kullanılan Mini Plakların Yerleştirilmesinin Simülasyonu ve Gerilme Analizi
Mühendis ve Makina Dergisi
, no.53, pp.44-49, 2012 (Peer-Reviewed Journal)
Refereed Congress / Symposium Publications in Proceedings
THE EFFECT OF DIFFERENT ORTHODONTIC BUCCAL TUBE SIZES AND SLOT DISTANCES ON MANDIBULAR MOLARS: A FINITE ELEMENT ANALYSIS
16th International Medicine and Health Sciences Researches Congress (UTSAK), 6 - 07 July 2024
The Effect of Different Buccal Tube Size and Slot Distance on Mandibular Molars: A Finite Element Analysis
16th International Medical and Health Sciences Research Congress, Ankara, Turkey, 6 - 07 July 2024, pp.7-8
Effect Of Different Build Orientations On Mechanical Properties Of Parts in Additive Manufacturing Technology
9th International IFS and Contemporary Mathematics and Engineering Conference, Mersin, Turkey, 8 - 11 July 2023, pp.201-202
IMPACT SLIDING WEAR BEHAVIOUR of AlCrN and AlCrTiN Coatings
2st-International Congress on Modern Sciences Tashkent Chemical-Technological Institute, Toskent, Uzbekistan, 16 - 17 December 2022, pp.1150
THE EFFECT of “B” TARGET VOLTAGE on WEAR PROPERTIES of TiCrNb-hBN COATINGS
The International Conference of Materials and Engineering Technology, İstanbul, Turkey, 8 - 10 September 2022, pp.1-5
HIGH TEMPERATURE WEAR BEHAVIOUR OF TiCrNb-hBN COATINGS
International Conference on Global Practice of Multidiciplinary Scientific Studies , Tbilisi, Georgia, 22 - 24 July 2022, pp.324-331
Sürtünme Karıştırma İşleminin Eklemeli İmalat Yöntemi ile Üretilen AlSi10Mg Alaşımının Tribolojik Özelliklerine Etkisi
1 ST INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES, Konya, Turkey, 1 - 03 November 2021, pp.1-10
EVALUATION OF THE FAILURE LOAD OF THE SINGLE-LAP JOINT ESTABLISHED BY USING NANOPARTICLE REINFORCED ADHESIVE
2. ULUSLARARASI 19 MAYIS YENİLİKÇİ BİLİMSEL YAKLAŞIMLAR KONGRESİ, Samsun, Turkey, 27 - 29 December 2019, pp.339-340
Design and FEA Analysis of Dental Implant With Three Different Scaffold Structure
Uluslararası 30 Ağustos Bilimsel Araştırmalar Sempozyumu, 28 - 31 August 2019
DESIGN AND FEA ANALYSIS OF CERVICAL DISC PROSTHESIS WITH DIFFERENT GEOMETRIES AND POROUS STRUCTURES
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Turkey, 21 - 23 June 2019, pp.1283
Analysis of Dental implant According to Number of Components in Terms of Applicability and Mechanical Behavior
1st International Conference on Advances in Mechanical and Mechatronics Engineering (ICAMMEN 2018), 8 - 09 November 2018
Investigation of Wear Hardness Propperties of CAD7CAM Materials: A Pilot Study
Turkish Society of Restorative Dentistry 21stInternational Scientific Congress, 1 - 03 November 2017
The Investigation of Wear Properties of TiN Coatings under Different Deposition Parameters
International Conference of Advanced Engineering Technologies, 21 - 23 September 2017
An Investigation of Locked and Unlocked Fixation Systems for Tibia Diaphysis Fractures under Torsional Stress
International Conference of Advanced Engineering Technologies’, 21 - 23 September 2017
The Wear Behaviour of 52100 Steel Against to AL2O3 and WC under Vacuum and Air Environment
9th International Conference of Tribology (Balkan Trib 17), 13 - 15 September 2017
Examination of Locked and Unlocked Fixation Plates Used in Tibia Diaphysis Fractures Produced by Different Materials a Finite Element Study
International Conference on Advances and Innovations in Engineering, 10 - 12 May 2017
Design and Analysis of Cervical Disc Prosthesis in Different Geometries A Finite Element Study
International Conference on Advances and Innovations in Engineering, 10 - 12 May 2017
Kemiğe Monte Edilmiş Farklı Geometrilere Sahip Servikal Disk Protezlerde Gerilme Analizi
Mühendisikte Yeni Teknolojiler Sempozyumu (MYT), Bayburt, Turkey, 15 - 17 October 2015, pp.62
Tibia Kırıklarında Kullanılan Kilitli ve Kilitsiz Plak Fiksasyon Sistemlerinin Sonlu Elemanlar Yöntemiyle İncelenmesi
VII. Biyomekanik Kongresi, Isparta, Turkey, 11 - 13 September 2014, pp.89-97
Stress Distribution in a MOD inlay cavity restored with different ceramics: A Finite Elemet Analysis
18. Restoratif Diş Tedavisi Anabilim Dalları Toplantısı ve Sempozyumu, Kayseri, Turkey, 26 - 28 October 2013, vol.2, pp.10-11
Dövme Yöntemi İle Servikal Disk Üretiminin İncelemesi
Makina İmalat Teknolojileri Kongresi-MATİT 2013, Bursa, Turkey, 8 - 10 March 2013, pp.125-135
’Kompleks Geometriye Sahip Kalça Protezinin Dövme Yöntemiyle Üretiminin FEM Analizleri
International Iron and Steel Symposium, Karabuk, Karabük, Turkey, 22 - 24 November 2012, pp.42-53
Radius kırıklarında plak fiksasyonu ve interamedüller çivileme yöntemlerinin teorik olarak incelenmesi
VI. Biyomekanik Kongresi, Sakarya, Turkey, 25 - 28 October 2012, pp.125-135
Analysis of forging process in bone plate production
2.International Scientific Conference on Engineering, Manufacturing and Advanced Technologies, Antalya, Turkey, 11 October 2012 - 13 October 2013, pp.56
TRAFİK KAZA GÜVENLİĞİNİ ARTIRMAK İÇİN CNG TÜPÜNÜN MODELLEMESİ VE OPTİMİZASYONU
VI. Makina Tasarım ve İmalat Teknolojileri Kongresi, Konya, Turkey, 22 - 23 October 2011, pp.125-129
Çene kırıklarında kullanılan mini plakların koyun çenesi üzerinde yerleştirilmesinin simülasyonu ve FEM ile gerilme analizi
TİSKON 2011, Samsun, Turkey, 21 - 23 April 2011, pp.31-39