Prof. GÖKAY NEMLİ

Publication Network

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

THE QUALITY COMPARISON OF PARTICLEBOARDS PRODUCED FROM HEARTWOOD AND SAPWOOD OF EUROPEAN LARCH

BARDAK S., NEMLİ G. , BARDAK T.

MADERAS-CIENCIA Y TECNOLOGIA, vol.21, no.4, pp.511-520, 2019 (Journal Indexed in SCI)

Potential Use of Textile Dust in the Middle Layer of Three-layered Particleboards as an Eco-friendly Solution

NEMLİ G. , ODABAŞ SERİN Z., ÖZDEMİR F., AYRILMIŞ N.

BIORESOURCES, vol.14, no.1, pp.120-127, 2019 (Journal Indexed in SCI)

INFLUENCE OF RESIDUE TYPE ON QUALITY PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM FAST-GROWN TREE OF HEAVEN (AILANTHUS ALTISSIMA (MILL.) SWINGLE)

BARDAK S., NEMLİ G. , TİRYAKİ S.

DREWNO, vol.62, no.204, pp.187-196, 2019 (Journal Indexed in SCI)

Utilization potential of waste wood subjected to insect and fungi degradation for particleboard manufacturing

NEMLİ G. , Ayan E., AY N. , TİRYAKİ S.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, vol.76, no.2, pp.759-766, 2018 (Journal Indexed in SCI)

Utilization Potential of Waste Wood Subjected to Insect and Fungi Degradation for Particleboard Manufacturing

NEMLİ G. , AYAN E., Ay N. , TİRYAKİ S.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, vol.76, no.2, pp.759-766, 2018 (Journal Indexed in SCI Expanded)

THE INFLUENCE OF RAW MATERIAL GROWTH REGION, ANATOMICAL STRUCTURE AND CHEMICAL COMPOSITION OF WOOD ON THE QUALITY PROPERTIES OF PARTICLEBOARDS

Bardak S., NEMLİ G. , TİRYAKİ S.

MADERAS-CIENCIA Y TECNOLOGIA, vol.19, no.3, pp.363-372, 2017 (Journal Indexed in SCI)

Investigation and neural network prediction of wood bonding quality based on pressing conditions

Bardak S., TİRYAKİ S. , NEMLİ G. , AYDIN A.

International Journal of Adhesion and Adhesives, vol.68, pp.115-123, 2016 (Journal Indexed in SCI)

ANALYSIS OF VOLUMETRIC SWELLING AND SHRINKAGE OF HEAT TREATED WOODS: EXPERIMENTAL AND ARTIFICIAL NEURAL NETWORK MODELING APPROACH

TİRYAKİ S. , BARDAK S., AYDIN A. , NEMLİ G.

MADERAS-CIENCIA Y TECNOLOGIA, vol.18, no.3, pp.477-492, 2016 (Journal Indexed in SCI)

Long-term water absorption behavior of thermoplastic composites produced with thermally treated wood

Hosseinihashemi S. K. , Arwinfar F., Najafi A., NEMLİ G. , Ayrilmis N.

MEASUREMENT, vol.86, pp.202-208, 2016 (Journal Indexed in SCI)

Effect of log position in European Larch (Larix decidua Mill.) tree on the technological properties of particleboard

MUHCU S., NEMLİ G. , Ayrilmis N., Bardak S., BAHAROGLU M., Sari B. , et al.

SCANDINAVIAN JOURNAL OF FOREST RESEARCH, vol.30, no.4, pp.357-362, 2015 (Journal Indexed in SCI)

Effects of hardener type, urea usage and conditioning period on the quality properties of particleboard

ATAR I., NEMLİ G. , Ayrilmis N., BAHAROGLU M., Sari B. , Bardak S.

MATERIALS & DESIGN, vol.56, pp.91-96, 2014 (Journal Indexed in SCI)

Effect of paraffin application technique on the physical and mechanical properties of particleboard

Baharoglu M., NEMLİ G. , Sari B. , Ayrilmis N., Bardak S., Zekovic E.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, vol.21, no.2, pp.191-195, 2014 (Journal Indexed in SCI)

Effects of anatomical and chemical properties of wood on the quality of particleboard

BAHAROGLU M., NEMLİ G. , Sari B. , Birturk T., Bardak S.

COMPOSITES PART B-ENGINEERING, vol.52, pp.282-285, 2013 (Journal Indexed in SCI)

The role of solid content of adhesive and panel density on the dimensional stability and mechanical properties of particleboard

Sari B. , NEMLİ G. , BAHAROGLU M., Bardak S., ZEKOVIC E.

JOURNAL OF COMPOSITE MATERIALS, vol.47, no.10, pp.1247-1255, 2013 (Journal Indexed in SCI)

The Influences of Drying Temperature of Wood Particles on the Quality Properties of Particleboard Composite

Sari B. , NEMLİ G. , Ayrilmis N., BAHAROGLU M., Bardak S.

DRYING TECHNOLOGY, vol.31, no.1, pp.17-23, 2013 (Journal Indexed in SCI)

The influence of moisture content of raw material on the physical and mechanical properties, surface roughness, wettability, and formaldehyde emission of particleboard composite

Baharoglu M., NEMLİ G. , Sari B. , Bardak S., Ayrilmis N.

COMPOSITES PART B-ENGINEERING, vol.43, no.5, pp.2448-2451, 2012 (Journal Indexed in SCI)

The effect of decor paper properties and adhesive type on some properties of particleboard

Bardak S., Sari B. , NEMLİ G. , KIRCI H. , Baharoglu M.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, vol.31, no.6, pp.412-415, 2011 (Journal Indexed in SCI)

Effects of Density Profile and Hot Press Diagram on the Some Technological Properties of Particleboard Composite

Bardak S., NEMLİ G. , Sari B. , Baharoglu M., Zekovic E.

HIGH TEMPERATURE MATERIALS AND PROCESSES, vol.30, pp.31-37, 2011 (Journal Indexed in SCI)

Utilization Potential of Waste from Window Joints for Particleboard

ÇOLAK S. , NEMLİ G. , DEMİRKIR C. , AYDIN İ. , DEMİREL S.

JOURNAL OF COMPOSITE MATERIALS, vol.45, no.1, pp.29-37, 2011 (Journal Indexed in SCI)

Effects of acidity of the particles and amount of hardener on the physical and mechanical properties of particleboard composite bonded with urea formaldehyde

AKYÜZ K. C. , NEMLİ G. , BAHAROGLU M., Zekovic E.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, vol.30, no.3, pp.166-169, 2010 (Journal Indexed in SCI)

Effects of acidity of the particles and amount of hardener on the physical and mechanical properties of particleboard composite bonded with urea formaldehyde

AKYÜZ K. C. , NEMLİ G. , BAHAROĞLU M., ZEKOVİÇ E.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, vol.30, pp.166-169, 2010 (Journal Indexed in SCI)

Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite

Sari B. , NEMLİ G. , BARDAK S., BAHAROGLU M., Zekovic E.

HIGH TEMPERATURE MATERIALS AND PROCESSES, vol.29, no.4, pp.287-294, 2010 (Journal Indexed in SCI)

Manufacture and Properties of Particleboard Composite From Waste Sanding Dusts

Bardak S., NEMLİ G. , Sari B. , Baharoglu M., Zekovic E.

HIGH TEMPERATURE MATERIALS AND PROCESSES, vol.29, no.3, pp.159-168, 2010 (Journal Indexed in SCI)

Manufacture and properties of particleboard composite from waste sanding dusts

BARDAK S., NEMLİ G. , SARI B. , BAHAROĞLU M., Zekovic E.

HIGH TEMPERATURE MATERIALS AND PROCESSES, vol.29, no.3, pp.159-168, 2010 (Journal Indexed in SCI)

Effect of Press Parameters on Scratch and Abrasion Resistance of Overlaid Particleboard Panels

Nemli G. , HIZIROGLU S.

JOURNAL OF COMPOSITE MATERIALS, vol.43, no.13, pp.1413-1420, 2009 (Journal Indexed in SCI)

The potential for using the needle litter of Scotch pine (Pinus sylvestris L.) as a raw material for particleboard manufacturing

Nemli G. , YILDIZ S. , Gezer E. D.

BIORESOURCE TECHNOLOGY, vol.99, no.14, pp.6054-6058, 2008 (Journal Indexed in SCI)

Factors affecting some quality properties of the decorative surface overlays

Nemli G.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.195, pp.218-223, 2008 (Journal Indexed in SCI)

Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinus pinaster Ait.

Nemli G. , Aydin A.

INDUSTRIAL CROPS AND PRODUCTS, vol.26, no.3, pp.252-258, 2007 (Journal Indexed in SCI)

Relationship between the density profile and the technological properties of the particleboard composite

Nemli G. , Demirel S.

JOURNAL OF COMPOSITE MATERIALS, vol.41, no.15, pp.1793-1802, 2007 (Journal Indexed in SCI)

A Perspective from furniture and cabinet manufactures in Turkey

NEMLİ G. , Hızıroğlu S., SERİN H., AKYÜZ K. C. , AKYÜZ İ. , TOKSOY D.

BUILDING AND ENVIRONMENT, vol.42, pp.1699-1706, 2007 (Journal Indexed in SCI)

A perspective from furniture and cabinet manufacturers in Turkey

Nemli G. , HIZIROGLU S., SERIN H., Akyuz K. C. , Akyuz I. , Toksoy D.

BUILDING AND ENVIRONMENT, vol.42, no.4, pp.1699-1706, 2007 (Journal Indexed in SCI)

Effects of some sanding factors on the surface roughness of particleboard

Nemli G. , AKBULUT T., Zekovic E.

SILVA FENNICA, vol.41, no.2, pp.373-378, 2007 (Journal Indexed in SCI)

Evaluation of some of the properties of particleboard as function of manufacturing parameters

Nemli G. , Aydin I. , Zekovic E.

MATERIALS & DESIGN, vol.28, no.4, pp.1169-1176, 2007 (Journal Indexed in SCI)

Evaluation of the mechanical, physical properties and decay resistance of particleboard made from particles impregnated with Pinus brutia bark extractives

Nemli G. , Gezer E. D. , Yildiz S. , Temiz A. , Aydin A.

BIORESOURCE TECHNOLOGY, vol.97, no.16, pp.2059-2064, 2006 (Journal Indexed in SCI)

The resistances of several types of overlaying materials against cigarette burn, scratch, and abrasion

Nemli G. , KALAYCIOGLU H.

BUILDING AND ENVIRONMENT, vol.41, no.5, pp.640-645, 2006 (Journal Indexed in SCI)

Effects of melamine raw paper weight, varnish type and the structure of continuous pressed laminate (CPL) on the physical, mechanical properties and decay resistance of particleboard

Nemli G. , YILDIZ S. , GEZER E. D.

INTERNATIONAL BIODETERIORATION & BIODEGRADATION, vol.56, no.3, pp.166-172, 2005 (Journal Indexed in SCI)

The choosing of suitable decorative surface coating material types for interior end use applications of particleboard

Nemli G. , ORS Y., KALAYCIOGLU H.

CONSTRUCTION AND BUILDING MATERIALS, vol.19, no.4, pp.307-312, 2005 (Journal Indexed in SCI)

The influence of lamination technique on the properties of particleboard

Nemli G. , Colakoglu G.

BUILDING AND ENVIRONMENT, vol.40, no.1, pp.83-87, 2005 (Journal Indexed in SCI)

Influence of impregnating wood particles with mimosa bark extract on some properties of particleboard

Nemli G. , KIRCI H. , TEMIZ A.

INDUSTRIAL CROPS AND PRODUCTS, vol.20, no.3, pp.339-344, 2004 (Journal Indexed in SCI)

Influences of some manufacturing factors on the important quality properties of melamine-impregnated papers

Nemli G. , USTA M.

BUILDING AND ENVIRONMENT, vol.39, no.5, pp.567-570, 2004 (Journal Indexed in SCI)

Effect of residue type and tannin content on properties of particleboard manufactured from black locust

Nemli G. , HIZIROGLU S. , USTA M. , SERIN Z., OZDEMIR T., KALAYCIOGLU H.

FOREST PRODUCTS JOURNAL, vol.54, no.2, pp.36-40, 2004 (Journal Indexed in SCI)

The changes in important quality properties of continuous pressed laminates (CPL) with some changes in thickness and press parameters

Nemli G. , GEZER E. D. , HIZIROGLU S.

BUILDING AND ENVIRONMENT, vol.38, no.7, pp.913-917, 2003 (Journal Indexed in SCI)

Suitability of kiwi (Actinidia sinensis Planch.) prunings for particleboard manufacturing

Nemli G. , KIRCI H. , SERDAR B. , AY N.

INDUSTRIAL CROPS AND PRODUCTS, vol.17, no.1, pp.39-46, 2003 (Journal Indexed in SCI) Sustainable Development

Suitability of date palm (Phoenix dactyliferia) branches for particleboard production

Nemli G. , KALAYCIOGLU H. , ALP T.

HOLZ ALS ROH-UND WERKSTOFF, vol.59, no.6, pp.411-412, 2001 (Journal Indexed in SCI)

Biological, physical and mechanical properties of particleboard manufactured from waste tea leaves

YALINKILIC M., IMAMURA Y., TAKAHASHI M., KALAYCIOGLU H. , Nemli G. , DEMIRCI Z., et al.

INTERNATIONAL BIODETERIORATION & BIODEGRADATION, vol.41, no.1, pp.75-84, 1998 (Journal Indexed in SCI)

Articles Published in Other Journals

INCREASING THE OUTDOOR DURABILITY OF UREA FORMALDEHIDE PARTICLE BOARD WITH NEW GENERATION WATER-BORNE ACRYLIC COATINGS

ÖZGENÇ Ö. , NEMLİ G.

Sigma Journal of Engineering and Natural Sciences, vol.11, no.2, pp.159-166, 2020 (Refereed Journals of Other Institutions)

Ayçiçek Tablasının Yonga Levha Endüstrisinde Kullanılabilme Olanakları

BARDAK S., NEMLİ G. , BARDAK T., PEKER H., ÖZCAN M.

Bartın Orman Fakültesi Dergisi, vol.22, no.2, pp.485-499, 2020 (Refereed Journals of Other Institutions)

Determining the Factors Effecting Raw Material Preference in Furniture Sector in Turkey and the Problems Experienced in Supplying and Marketing Raw Materials

Aydın A. , Nemli G. , Gündüz G.

Journal of Bartın Faculty of Forestry, vol.21, no.2, pp.432-444, 2019 (International Refereed University Journal)

Determining The Factors Effecting Row Material Preference in Furniture Sector in Turkey and The Problems Experşienced in Supplying and Marketing Raw Materials

AYDIN A., NEMLİ G. , GÜNDÜZ G.

Journal of Bartın Faculty of Forestry, vol.21, no.2, pp.432-444, 2019 (Refereed Journals of Other Institutions)

Use of Screening Machine Wastes for Manufacturing of Particleboard Composite

BARDAK S., NEMLİ G.

Journal of Bartin Faculty of Forestry, vol.20, no.1, pp.81-86, 2018 (Other Refereed National Journals)

Use of Screening Machine Wastes for Manufacturing of Particleboard Composite, Bartın Orman Fakültesi Dergisi, 20 (1): 81-86, 2018.

BARDAK S., NEMLİ G.

Journal of Bartın Faculty of Forestry, vol.20, no.1, pp.81-86, 2018 (Refereed Journals of Other Institutions) Sustainable Development

EFFECTS OF CHEMICAL COMPOSITION OF WOOD AND RESIN TYPE ON PROPERTIES OF PARTICLEBOARD

SARI B. , NEMLİ G. , Ayrılmış n., Baharoğlu M., bardak s., GÜMÜŞKAYA E.

Lignocellulose, vol.1, no.3, pp.174-184, 2012 (Refereed Journals of Other Institutions)

Effects of Chemical Composition of Wood and Resin Type on Properties of Particleboard

Sarı B., Nemli G. , Ayrılmış N., Baharoglu M., GÜMÜŞKAYA E. , Bardak S.

Lignocellulose J., vol.1, no.3, pp.174-184, 2012 (International Refereed University Journal)

Yonga Rutubeti, Parafin Kullanımı Ve Ağaç Cinsinin Yongalevhanın Bazı Teknolojik Özellikleri Üzerine Etkileri

NEMLİ G. , DEMİREL S. , ZEKOViÇ E.

Artvin Orman Fakültesi Dergisi, vol.7, no.2, pp.81-93, 2006 (National Refreed University Journal)

YONGA RUTUBETİ PARAFİN KULLANIMI VE AĞAÇ CİNSİNİN YONGALEVHANIN BAZI TEKNOLOJİK ÖZELLİKLERİ ÜZERİNE ETKİLERİ

NEMLİ G. , DEMİREL S. , ZEKOVİÇ E.

Artvin Orman Fakültesi Dergisi, vol.7, no.2, pp.81-93, 2006 (Other Refereed National Journals)

Yonga Rutubeti, Parafin Kullanımı ve Ağaç Cinsinin Yongalevhanın Bazı Teknolojik Özellikleri Üzerine Etkileri

NEMLİ G. , DEMİREL S. , ZEKOVIC E.

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, vol.7, no.2, pp.81-93, 2006 (National Refreed University Journal)

Effects of Mimosa Bark Usage on Some Properties of Particleboard

NEMLİ G. , ÇOLAKOĞLU G.

Turkish Journal of Agriculture and Forestry, vol.29, no.3, pp.227-230, 2005 (Other Refereed National Journals)

’Influence of Coating Material Types on the Some Quality Properties of Particleboard

ÖZDEMİR T. , NEMLİ G. , AKBULUT T.

İstanbul Üniversitesi Orman Fakültesi Dergisi, vol.55, no.2, pp.87-95, 2005 (National Refreed University Journal)

’Kaplanmış Levha Ürünlerinin Kullanımında ve İşlenmesinde Dikkat Edilmesi Gereken Bazı Hususlar

NEMLİ G. , DEMİREL S.

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, vol.6, pp.59-68, 2005 (National Refreed University Journal)

KAPLANMIŞ LEVHA ÜRÜNLERİNİN KULLANIMINDA VE İŞLENMESİNDE DİKKAT EDİLMESİ GEREKEN BAZI HUSUSLAR

NEMLİ G. , DEMİREL S.

Artvin Orman Fakültesi Dergisi, vol.6, pp.59-68, 2005 (National Refreed University Journal)

Influence of Mimosa Bark Usage on the Some Properties of Particleboard

NEMLİ G. , ÇOLAKOĞLU G.

TURKISH JOURNAL OF AGRICULTURE AND FORESTRY, no.29, pp.277-230, 2005 (Other Refereed National Journals)

Laminat Malzemeler

NEMLİ G. , Öztürk İ., AYDIN A.

Kafkas Üniversitesi, Artvin Orman Fak. Dergisi, vol.1, no.2, pp.55-60, 2004 (National Refreed University Journal)

Laminat Malzemelerde Dizayn Seçenekleri

NEMLİ G. , AYDIN İ. , Öztürk İ.

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, vol.1, no.2, pp.96-101, 2004 (National Refreed University Journal)

’Pres Çeşidinin Yonga Levha Teknik Özellikleri Üzerine Etkisi

NEMLİ G. , KALAYCIOGLU H. , AKBULUT T.

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, vol.1, no.2, pp.89-95, 2004 (National Refreed University Journal)

Influence of Melamine Formaldehyde Addition into the Urea Formaldehyde Adhesive on Some Properties of Particleboard

NEMLİ G. , AKBULUT T.

İstanbul Üniversitesi Orman Fakültesi Dergisi, vol.54, no.1, pp.1-8, 2004 (National Refreed University Journal)

Levha Endüstrisinde Yüzey Kaplama İşlemleri

NEMLİ G. , KALAYCIOĞLU H.

Ağaç Makineleri, vol.3, no.13, pp.28-33, 2004 (National Non-Refereed Journal)

Laminat Malzemelerde Dizayn Seçenekleri

NEMLİ G. , AYDIN A. , Öztürk İ.

Kafkas Üniversitesi, Artvin Orman Fak. Dergisi, vol.1, no.2, pp.96-101, 2004 (National Refreed University Journal)

Kalaycıoğlu, H., Nemli,G., 2004, Orman Endüstrisinin Çevre Kirliliği Üzerine Etkileri

KALAYCIOĞLU H. , NEMLİ G.

Mobilya Dekorasyon, vol.9, no.58, pp.66-76, 2004 (Other Refereed National Journals) Sustainable Development

Orman Endüstrisinin Çevre Kirliliği Üzerine Etkileri

KALAYCIOĞLU H. , NEMLİ G.

Mobilya Dekorasyon Dergisi, no.58, pp.66-76, 2004 (National Non-Refereed Journal) Sustainable Development

Some of the properties of particleboard made from Kenaf as quality control tool

KALAYCIOĞLU H. , NEMLİ G. , Hızıroğlu S.

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON QUALITY RELIABILITY AND MAINTENANCE, pp.31-34, 2004 (Refereed Journals of Other Institutions)

Effects of Some Manufacturing Factors on The Properties of Particleboard Manufactured from Alder

NEMLİ G.

Turkish Journal of Agriculture and Forestry, vol.27, pp.99-104, 2003 (Other Refereed National Journals)

’Effects of Juvenile Wood on the Some Physical and Mechanical Properties of Particleboards Made from Black Locust

NEMLİ G. , AKBULUT T.

İstanbul Üniversitesi Orman Fakültesi Dergisi, vol.53, no.2, pp.75-83, 2003 (National Refreed University Journal)

Yalancı Akasya Odunundan Üretilen Yonga Levhalarda Tomruk Depolama Süresi ve Kabuk Oranının Formaldehit Emisyonuna Etkisi

NEMLİ G. , ÇOLAKOĞLU G. , ÇOLAK S. , AYDIN İ.

İstanbul Üniversitesi Orman Fakültesi Dergisi, vol.52, no.2, pp.73-83, 2002 (National Refreed University Journal)

Douglas Göknarı Odununun Yongalevha Üretimi İçin Uygunluğunun Belirlenmesi

NEMLİ G. , KALAYCIOGLU H. , AY N. , Şahin H.

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, vol.3, no.1, pp.17-23, 2002 (National Refreed University Journal)

Effects of Surface Coating Materials on the Thermal Conductivity and Combustion Properties of Particleboard

NEMLİ G. , KALAYCIOGLU H.

İstanbul Üniversitesi Orman Fakültesi Dergisi, vol.26, pp.155-160, 2002 (National Refreed University Journal)

Effects of Surface Coating Materials on the Thermal Conductivity and Cumbustion Properties of Particleboard,

NEMLİ G. , KALAYCIOĞLU H.

Turkısh Journal of Agriculture & Forestry, 26(3), -., vol.26, no.3, pp.155-161, 2002 (Journal Indexed in ESCI)

Douglas Göknarı (Pseudotsuga menziesii (Mirb.) Franco) Odununun Yonga Levha Üretimi İçin Uygunluğunun Belirlenmesi

NEMLİ G. , KALAYCIOĞLU H. , AY N. , Şahin H.

ARTVİN ÇORUH ÜNİVERSİTESİ ORMAN FAKÜLTESİ DERGİSİ, vol.3, no.1, pp.17-24, 2002 (National Refreed University Journal)

Factors Affecting the Production of E1 Type Particleboard

NEMLİ G.

Turkish Journal of Agriculture and Forestry, vol.26, pp.31-36, 2002 (National Refreed University Journal)

Ahşap Sanayinde Melamin Formaldehit (MF) ve Melamin/Üre Formaldehit (MÜF) yapıştırıcılarının Kullanımı

ÇOLAKOĞLU G. , AYDIN İ. , NEMLİ G. , ÇOLAK S.

Mobilya Dekarasyon Dergisi, no.47, pp.131-138, 2002 (National Non-Refereed Journal)

Yalancı Akasya (Robinia Pseudoacacia L.) Odunundan Üretilen Yonga Levhalarda Tomruk Depolama Süresi Ve Kabuk Oranının Formaldehit Emisyonuna Etkisi

NEMLİ G. , ÇOLAKOĞLU G. , ÇOLAK S. , AYDIN İ.

İ.Ü. Orman Fakültesi Dergisi, vol.A-52, no.2, pp.77-83, 2002 (National Refreed University Journal)

Laminat Endüstrisinde Üre ve Melamin Formaldehit Tutkalları

NEMLİ G. , ÇOLAK S.

Ağaç Makineleri Teknoloji ve Araştırma Dergisi, no.4, pp.46-48, 2002 (National Non-Refereed Journal)

Ağaç Levha Endüstrisinde Formaldehit Emisyonu ve Azaltıcı Yöntemler

ÇOLAK S. , NEMLİ G.

Mobilya Dekorasyon Dergisi, no.44, pp.18-24, 2001 (National Non-Refereed Journal)

Ağaç Levha Endüstrisinde Kağıt Folyolar

NEMLİ G. , KALAYCIOĞLU H.

Laminart Mobilya, Dekorasyon, Sanat ve Tasarım Dergisi, no.8, pp.148-150, 2000 (National Non-Refereed Journal)

Yongalevha Teknolojisi

NEMLİ G. , KALAYCIOĞLU H.

Laminart Mobilya Dekorasyon Dergisi, no.7, pp.120-126, 2000 (National Non-Refereed Journal)

Yongalevha Teknolojisi120-126

NEMLİ G. , KALAYCIOĞLU H.

Laminart Mobilya Dekorasyon, vol.2, no.7, pp.120, 2000 (National Non-Refereed Journal)

Melamin Emdirilmiş Kağıtlarla Kaplamanın Yonga-levha Teknik Özelliklerine Etkisi

NEMLİ G. , KALAYCIOĞLU H.

TURKISH JOURNAL OF AGRICULTURE AND FORESTRY, vol.23, pp.25-31, 1999 (Journal Indexed in ESCI)

Yüzey Kaplama Malzemelerinin Mutfak Dolabı Üretiminde Kullanılan Yongalevha Fiziksel, Mekanik Özelliklerine Etkileri, ve Yüzey Kalite Özellikleri, Kısım 1: Fiziksel Özellikler Üzerine Etkiler

ÖZDEMİR T. , KALAYCIOGLU H. , MALKOÇOĞLU A. , NEMLİ G.

Turkish Journal of Agriculture and Forestry, vol.23, no.4, pp.969-976, 1999 (National Refreed University Journal)

Melamin Emdirilmiş Kağıtlarla Kaplamanın Yongalevha Teknik Özellikleri Üzerine Etkileri

NEMLİ G. , KALAYCIOGLU H.

Turkish Journal of Agriculture and Forestry, vol.23, no.1, pp.25-31, 1999 (National Refreed University Journal)

Yüzey Kaplama Malzemelerinin Mutfak Dolabı Üzerinde Kullanılan Yongalevhaların Fiziksel, Mekanik Özelliklerine Etkileri ve Yüzey Kalite Özellikleri, Kısım 1. Fiziksel Özellikleri Üzerine Etkiler

ÖZDEMİR T. , KALAYCIOĞLU H. , MALKOÇOĞLU A. , NEMLİ G.

Turkish Journal of Agriculture and Forestry, vol.23, no.4, pp.969-976, 1999 (Other Refereed National Journals)

Yongalevha Endüstrisinde Kenar Kaplama Malzemeleri

NEMLİ G. , KALAYCIOĞLU H.

Mobilya Dekorasyon Dergisi, no.29, pp.8-10, 1999 (National Non-Refereed Journal)

Yongalevha Endüstrisinde Sıvı Yüzey İşlemleri

NEMLİ G. , KALAYCIOĞLU H.

Mobilya Dekorasyon, vol.5, no.25, pp.86-94, 1998 (Other Refereed National Journals)

Yongalevhada Laminasyon (Lamination in chipboard)

KALAYCIOĞLU H. , NEMLİ G.

Mobilya Dekorasyon Dergisi, vol.6, no.12, pp.30-47, 1996 (Other Refereed National Journals)

Refereed Congress / Symposium Publications in Proceedings

INCREASING THE OUTDOOR DURABILITY OF UREA FORMALDEHYDE PARTICLEBOARDS WITH NEW GENERATION WATER-BORNE ACRYLIC COATINGS

ÖZGENÇ Ö. , NEMLİ G.

International Forest Products Congress (ORENKO 2020), Trabzon, Turkey, 23 - 24 September 2020

Odun lifi ve halıflex Atıklarından üretilen Liflevhaların Bazı Mekanik ve Fiziksel Özellikleri

USTAÖMER D., NEMLİ G.

3. International Mediterranean Forest and Environment Symposium, 3 - 05 October 2019

Odun Lifi ve Halıfleks Atıklarindan Üretilen Liflevhaların Bazı Mekanik ve Fiziksel Özellikleri

USTAÖMER D. , NEMLİ G.

3.International Mediterrenean Forest and Environment Symposium, Kahramanmaraş, Turkey, 3 - 05 October 2019

Technological properties of three layered particleboard with textile dust in the middle layer

AYRILMIŞ N., NEMLİ G. , ÖZDEMİR F., DÜNDAR T.

IV. International Ege Composite Materials Symposium, Kompege, 6 - 08 September 2018

Comparison of Mechanical and Thermal Properties of Waste and Neat Polypropylene

GÜNDÜZ G., AYDEMİR D., SÖZEN E., NEMLİ G.

THE INTERNATIONAL FOREST PRODUCTS CONGRESS, Trabzon, Turkey, 26 - 29 September 2018, pp.493-500

The Changes in The Thickness Swelling of The Particlboard Related to The Board Density and Adhesive Type

BAHAROĞLU M., NEMLİ G.

ORENKO 2018- International Forest Products Congress, Trabzon, Turkey, 26 - 29 September 2018

TECHNOLOGICAL PROPERTIES OF THREE-LAYEREDPARTICLABOARD WITH TEXTILE DUST IN THE MIDDLE LAYER

AYRILMIŞ N., NEMLİ G. , ÖZDEMİR F., DÜNDAR T.

IV. International Ege Composite Materials SymposiumKOMPEGE 2018, İzmir, Turkey, 6 - 08 September 2018, pp.698-703

INFLUENCES OF ADHESIVE TYPE AND BOARD DENSITY ON THE MECHANICAL PROPERTIES OF PARTICLEBOARD

BAHAROĞLU M., NEMLİ G.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Turkey, 27 - 29 June 2018

Effect of Adhesive Type on Flame Resistance, Formaldehyde Emission and Physico-Mechanical Properties of Particleboards

ARAS U. , KALAYCIOĞLU H. , YEL H., NEMLİ G.

International Technological Sciences and Design Symposium, Giresun, Turkey, 27 - 29 June 2018, pp.1755-1763

Orman Ürünleri Sanayiinde İstatistiksel Proses Kontrol Uygulamaları,

AYDIN A. , TİRYAKİ S. , ADANUR H. , ÜÇÜNCÜ K. , NEMLİ G.

International Symposium of Applied Business, Managementand Economics Researches, 3 - 05 May 2018, pp.33 Sustainable Development

Orman Ürünleri Sanayinde İstatistiksel Proses Kontrol Uygulamaları

AYDIN A. , TİRYAKİ S. , ADANUR H. , ÜÇÜNCÜ K. , NEMLİ G.

International Symposium of Applied Business Management and Economics Researches ISABMER, Bayburt, Turkey, 3 - 05 May 2018, vol.1, pp.33 Sustainable Development

Effects of sodium hydroxide treatment of particles on the quality properties of particleboard

NEMLİ G. , BARDAK S.

International Symposium on New Horizons in Forestry, 18 - 20 October 2017

The influence of sapwood and heartwood usage on the quality properties of particleboard

NEMLİ G. , BARDAK S.

International Symposium on New Horizons in Forestry, 18 - 20 October 2017

The İnfluence of Sapwood and Heartwood Usage on The Quality Properties of Particleboard

NEMLİ G. , BARDAK S.

International Symposium on New Horizons in Forestry, 18 - 20 October 2017, pp.467

EFFECT OF ADHESIVE TYPE ON THE QUALITY PROPERTIES OF PARTICLEBOARD

AYRILMIŞ N., NEMLİ G.

XIV. International Scientific Congress, Summer Session, Machines, Technologies, Materials, 13 - 16 September 2017, vol.7, pp.519-520

Use of screening machine wastes for Manufacturing of particleboard composite

BARDAK S., NEMLİ G.

International Conference on Agriculture, Forest, Food Sciences and Technologies, 15 - 17 May 2017, pp.472

The effect of sanding pad type on the surface quality of particle Boards

Kara M. E. , NEMLİ G. , SAÇLI C., BİÇER E., AYRILMIŞ N.

International Conference on Agriculture, Forest, Food Sciences and Technologies, 15 - 17 May 2017, pp.431

Effects of Core Layer Particle Sizes on the some mechanical and physical properties of particleboard

Kara M. E. , NEMLİ G. , Karakaya B., AYRILMIŞ N.

International Conference on Agriculture, Forest, Food Sciences and Technologies, 15 - 17 May 2017, pp.548

Feasibility of incorporating Ailanthus altissima (Mill.) Swingle wood in particleboard composite

BARDAK S., NEMLİ G.

International Forestry Symposium, IFS, Kastamonu, Turkey, 7 - 10 December 2016, pp.718-725

Effect of lamination conditions on technological properties of HDF laminate parquet

NEMLİ G. , Özçifçi A., Kara M. E. , Çelik Ü.

II nd International Furniture Congress, Muğla, Turkey, 13 - 15 October 2016, pp.190-196

Properties of Cotton Ball Cement Bonded Particleboard Abstract of Workshop on Adding Value Through Physical Functionality

İSTEK A., AKSU S., KALAYCIOĞLU H. , NEMLİ G. , NEMLİ G.

WORKSHOP on Adding Value through Physical Functionality -COST E49, 28 - 29 April 2009

The Effect of Resin Type on the Some Quality Properties of Laminated Decor Papers

İstek A., Aksu S., KALAYCIOĞLU H. , NEMLİ G.

COST E49 Processes and Performance of Wood-Based Panels, Workshop, Adding Value Through Physical Functionality,, İstanbul, Turkey, 28 - 29 April 2009, pp.24

The effects of zinc borate treatment of wood strands on some technological properties of OSB

DÖNMEZ ÇAVDAR A., KALAYCIOGLU H. , NEMLİ G.

The International Research Group on Wood Protection, İstanbul, Turkey, 25 - 29 May 2008, pp.1-7

The effects of Zinc Borate Treatment of Wood Strands on Some Technological Properties of Oriented Strandboard (OSB)

Dönmez Çavdar A., KALAYCIOĞLU H. , NEMLİ G.

IRG 39, IRG/WP 08-40419, İstanbul, Turkey, 25 - 29 May 2008, pp.1-8

The effects of zinc borate treatment of wood strands on some technological properties of oriented strandboard (OSB)

DÖNMEZ ÇAVDAR A. , KALAYCIOĞLU H. , NEMLİ G.

International Research Group on Wood Protection, 39th Annual Meeting, İstanbul, Turkey, 25 - 29 May 2008, pp.1-8

Some of the Properties of Particleboard Made from Kenaf as Quality Control Board

KALAYCIOĞLU H. , NEMLİ G. , hızıroğlu s.

Proc. 5th International Conference, Quality Reliability Maintenance, 24 - 25 January 2004, pp.31-34

Some of the properties of particleboard made from Kenaf as quality control tool

KALAYCIOGLU H. , Nemli G. , HIZIROGLU S.

5th International Conference on Quality, Reliability and Maintenance, Oxford, United Kingdom, 1 - 02 April 2004, pp.31-34

Yüzey Kaplama Malzemelerinin Mutfak Dolabı Üretiminde Kullanılan Yongalevhaların Bazı Mekanik Özellikleri Üzerine Etkileri

ÖZDEMİR T. , KALAYCIOGLU H. , MALKOÇOĞLU A. , NEMLİ G.

II. Ulusal Karadeniz Ormancılık Kongresi, Artvin, Turkey, 15 - 18 May 2002, vol.3, pp.837-845

Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Articles Published in Other Journals

Refereed Congress / Symposium Publications in Proceedings

Other Publications