Prof. Dr. GÖKAY NEMLİ

Yayın Ağı

Makaleler 88

1. YONGALEVHA ENDÜSTRİSİNDE ZIMPARALAMA SORUNLARININ VE ÇÖZÜM ÖNERİLERİNİN BELİRLENMESİNE YÖNELİK BİR ÇALIŞMA

AYDIN A., NEMLİ G.

Düzce Üniversitesi Orman Fakültesi Ormancılık Dergisi , cilt.19, sa.2, ss.319-327, 2023 (Hakemli Dergi)

2. Potential Use of Olive Stone Residues in Particleboard Production

NEMLİ G., ARAS U., KALAYCIOĞLU H., Kustas S.

DRVNA INDUSTRIJA , cilt.74, sa.2, ss.196-203, 2023 (SCI-Expanded, Scopus)

3. Türkiye Yongalevha Endüstrisinin Üretim Problemleri Ve Çözüm Önerilerinin İncelenmesi

AYDIN A., NEMLİ G.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.10, sa.3, ss.1469-1475, 2022 (Hakemli Dergi)

4. Odun Lifi ve Halifleks Atıklarından Üretilen Liflevhaların Bazı Mekanik ve Fiziksel Özellikleri

Ustaömer D., Nemli G.

Journal of Anatolian Environmental and Animal Sciences , cilt.7, sa.1, ss.4-8, 2022 (Hakemli Dergi)

5. INCREASING THE OUTDOOR DURABILITY OF UREA FORMALDEHIDE PARTICLE BOARD WITH NEW GENERATION WATER-BORNE ACRYLIC COATINGS

ÖZGENÇ Ö., NEMLİ G.

Sigma Journal of Engineering and Natural Sciences , cilt.11, sa.2, ss.159-166, 2020 (ESCI)

6. Ayçiçek Tablasının Yonga Levha Endüstrisinde Kullanılabilme Olanakları

BARDAK S., NEMLİ G., BARDAK T., PEKER H., ÖZCAN M.

Bartın Orman Fakültesi Dergisi , cilt.22, sa.2, ss.485-499, 2020 (Hakemli Dergi)

7. THE QUALITY COMPARISON OF PARTICLEBOARDS PRODUCED FROM HEARTWOOD AND SAPWOOD OF EUROPEAN LARCH

BARDAK S., NEMLİ G., BARDAK T.

MADERAS-CIENCIA Y TECNOLOGIA , cilt.21, sa.4, ss.511-520, 2019 (SCI-Expanded)

8. Determining the Factors Effecting Raw Material Preference in Furniture Sector in Turkey and the Problems Experienced in Supplying and Marketing Raw Materials

Aydın A., Nemli G., Gündüz G.

Journal of Bartın Faculty of Forestry , cilt.21, sa.2, ss.432-444, 2019 (Hakemli Dergi)

9. Potential Use of Textile Dust in the Middle Layer of Three-layered Particleboards as an Eco-friendly Solution

NEMLİ G., ODABAŞ SERİN Z., ÖZDEMİR F., AYRILMIŞ N.

BIORESOURCES , cilt.14, sa.1, ss.120-127, 2019 (SCI-Expanded)

10. INFLUENCE OF RESIDUE TYPE ON QUALITY PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM FAST-GROWN TREE OF HEAVEN (AILANTHUS ALTISSIMA (MILL.) SWINGLE)

BARDAK S., NEMLİ G., TİRYAKİ S.

DREWNO , cilt.62, sa.204, ss.187-196, 2019 (SCI-Expanded)

11. Determining The Factors Effecting Row Material Preference in Furniture Sector in Turkey and The Problems Experşienced in Supplying and Marketing Raw Materials

AYDIN A., NEMLİ G., GÜNDÜZ G.

Journal of Bartın Faculty of Forestry , cilt.21, sa.2, ss.432-444, 2019 (Hakemli Dergi)

12. Use of Screening Machine Wastes for Manufacturing of Particleboard Composite

BARDAK S., NEMLİ G.

Journal of Bartin Faculty of Forestry , cilt.20, sa.1, ss.81-86, 2018 (Hakemli Dergi)

13. Utilization potential of waste wood subjected to insect and fungi degradation for particleboard manufacturing

NEMLİ G., Ayan E., AY N., TİRYAKİ S.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , cilt.76, sa.2, ss.759-766, 2018 (SCI-Expanded)

14. THE INFLUENCE OF RAW MATERIAL GROWTH REGION, ANATOMICAL STRUCTURE AND CHEMICAL COMPOSITION OF WOOD ON THE QUALITY PROPERTIES OF PARTICLEBOARDS

Bardak S., NEMLİ G., TİRYAKİ S.

MADERAS-CIENCIA Y TECNOLOGIA , cilt.19, sa.3, ss.363-372, 2017 (SCI-Expanded)

15. Investigation and neural network prediction of wood bonding quality based on pressing conditions

Bardak S., TİRYAKİ S., NEMLİ G., AYDIN A.

International Journal of Adhesion and Adhesives , cilt.68, ss.115-123, 2016 (SCI-Expanded, Scopus)

16. ANALYSIS OF VOLUMETRIC SWELLING AND SHRINKAGE OF HEAT TREATED WOODS: EXPERIMENTAL AND ARTIFICIAL NEURAL NETWORK MODELING APPROACH

TİRYAKİ S., BARDAK S., AYDIN A., NEMLİ G.

MADERAS-CIENCIA Y TECNOLOGIA , cilt.18, sa.3, ss.477-492, 2016 (SCI-Expanded, Scopus)

17. Long-term water absorption behavior of thermoplastic composites produced with thermally treated wood

Hosseinihashemi S. K., Arwinfar F., Najafi A., NEMLİ G., Ayrilmis N.

MEASUREMENT , cilt.86, ss.202-208, 2016 (SCI-Expanded)

18. Effect of log position in European Larch (Larix decidua Mill.) tree on the technological properties of particleboard

MUHCU S., NEMLİ G., Ayrilmis N., Bardak S., BAHAROGLU M., Sari B., et al.

SCANDINAVIAN JOURNAL OF FOREST RESEARCH , cilt.30, sa.4, ss.357-362, 2015 (SCI-Expanded)

19. Effects of hardener type, urea usage and conditioning period on the quality properties of particleboard

ATAR I., NEMLİ G., Ayrilmis N., BAHAROGLU M., Sari B., Bardak S.

MATERIALS & DESIGN , cilt.56, ss.91-96, 2014 (SCI-Expanded)

20. Effect of paraffin application technique on the physical and mechanical properties of particleboard

Baharoglu M., NEMLİ G., Sari B., Ayrilmis N., Bardak S., Zekovic E.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.21, sa.2, ss.191-195, 2014 (SCI-Expanded)

21. Effects of anatomical and chemical properties of wood on the quality of particleboard

BAHAROGLU M., NEMLİ G., Sari B., Birturk T., Bardak S.

COMPOSITES PART B-ENGINEERING , cilt.52, ss.282-285, 2013 (SCI-Expanded)

22. The role of solid content of adhesive and panel density on the dimensional stability and mechanical properties of particleboard

Sari B., NEMLİ G., BAHAROGLU M., Bardak S., ZEKOVIC E.

JOURNAL OF COMPOSITE MATERIALS , cilt.47, sa.10, ss.1247-1255, 2013 (SCI-Expanded)

23. The Influences of Drying Temperature of Wood Particles on the Quality Properties of Particleboard Composite

Sari B., NEMLİ G., Ayrilmis N., BAHAROGLU M., Bardak S.

DRYING TECHNOLOGY , cilt.31, sa.1, ss.17-23, 2013 (SCI-Expanded)

24. The influence of moisture content of raw material on the physical and mechanical properties, surface roughness, wettability, and formaldehyde emission of particleboard composite

Baharoglu M., NEMLİ G., Sari B., Bardak S., Ayrilmis N.

COMPOSITES PART B-ENGINEERING , cilt.43, sa.5, ss.2448-2451, 2012 (SCI-Expanded)

25. EFFECTS OF CHEMICAL COMPOSITION OF WOOD AND RESIN TYPE ON PROPERTIES OF PARTICLEBOARD

SARI B., NEMLİ G., Ayrılmış n., Baharoğlu M., bardak s., GÜMÜŞKAYA E.

Lignocellulose , cilt.1, sa.3, ss.174-184, 2012 (Hakemli Dergi)

26. The effect of decor paper properties and adhesive type on some properties of particleboard

Bardak S., Sari B., NEMLİ G., KIRCI H., Baharoglu M.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.31, sa.6, ss.412-415, 2011 (SCI-Expanded)

27. Effects of Density Profile and Hot Press Diagram on the Some Technological Properties of Particleboard Composite

Bardak S., NEMLİ G., Sari B., Baharoglu M., Zekovic E.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.30, ss.31-37, 2011 (SCI-Expanded)

28. Utilization Potential of Waste from Window Joints for Particleboard

ÇOLAK S., NEMLİ G., DEMİRKIR C., AYDIN İ., DEMİREL S.

JOURNAL OF COMPOSITE MATERIALS , cilt.45, sa.1, ss.29-37, 2011 (SCI-Expanded)

29. Effects of acidity of the particles and amount of hardener on the physical and mechanical properties of particleboard composite bonded with urea formaldehyde

AKYÜZ K. C., NEMLİ G., BAHAROGLU M., Zekovic E.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.30, sa.3, ss.166-169, 2010 (SCI-Expanded)

30. Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite

Sari B., NEMLİ G., BARDAK S., BAHAROGLU M., Zekovic E.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.29, sa.4, ss.287-294, 2010 (SCI-Expanded)

31. Manufacture and Properties of Particleboard Composite From Waste Sanding Dusts

Bardak S., NEMLİ G., Sari B., Baharoglu M., Zekovic E.

HIGH TEMPERATURE MATERIALS AND PROCESSES , cilt.29, sa.3, ss.159-168, 2010 (SCI-Expanded)

32. Effect of Press Parameters on Scratch and Abrasion Resistance of Overlaid Particleboard Panels

Nemli G., HIZIROGLU S.

JOURNAL OF COMPOSITE MATERIALS , cilt.43, sa.13, ss.1413-1420, 2009 (SCI-Expanded)

33. Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites

Nemli G., DEMİREL S., Guemueskaya E., ASLAN M., ACAR C.

WASTE MANAGEMENT , cilt.29, sa.3, ss.1129-1131, 2009 (SCI-Expanded)

34. The potential for using the needle litter of Scotch pine (Pinus sylvestris L.) as a raw material for particleboard manufacturing

Nemli G., YILDIZ S., Gezer E. D.

BIORESOURCE TECHNOLOGY , cilt.99, sa.14, ss.6054-6058, 2008 (SCI-Expanded)

35. Factors affecting some quality properties of the decorative surface overlays

Nemli G.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.195, ss.218-223, 2008 (SCI-Expanded)

36. Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinus pinaster Ait.

Nemli G., Aydin A.

INDUSTRIAL CROPS AND PRODUCTS , cilt.26, sa.3, ss.252-258, 2007 (SCI-Expanded, Scopus)

37. Relationship between the density profile and the technological properties of the particleboard composite

Nemli G., Demirel S.

JOURNAL OF COMPOSITE MATERIALS , cilt.41, sa.15, ss.1793-1802, 2007 (SCI-Expanded)

38. A perspective from furniture and cabinet manufacturers in Turkey

Nemli G., HIZIROGLU S., SERIN H., Akyuz K. C., Akyuz I., Toksoy D.

BUILDING AND ENVIRONMENT , cilt.42, sa.4, ss.1699-1706, 2007 (SCI-Expanded)

39. Effects of some sanding factors on the surface roughness of particleboard

Nemli G., AKBULUT T., Zekovic E.

SILVA FENNICA , cilt.41, sa.2, ss.373-378, 2007 (SCI-Expanded)

40. Evaluation of some of the properties of particleboard as function of manufacturing parameters

Nemli G., Aydin I., Zekovic E.

MATERIALS & DESIGN , cilt.28, sa.4, ss.1169-1176, 2007 (SCI-Expanded)

41. Evaluation of the mechanical, physical properties and decay resistance of particleboard made from particles impregnated with Pinus brutia bark extractives

Nemli G., Gezer E. D., Yildiz S., Temiz A., Aydin A.

BIORESOURCE TECHNOLOGY , cilt.97, sa.16, ss.2059-2064, 2006 (SCI-Expanded, Scopus)

42. Producing composite particleboard from kenaf (Hibiscus cannabinus L.) stalks

KALAYCIOGLU H., Nemli G.

INDUSTRIAL CROPS AND PRODUCTS , cilt.24, sa.2, ss.177-180, 2006 (SCI-Expanded)

43. Influences of some factors on the formaldehyde content of particleboard

Nemli G., Ozturk I.

BUILDING AND ENVIRONMENT , cilt.41, sa.6, ss.770-774, 2006 (SCI-Expanded)

44. The resistances of several types of overlaying materials against cigarette burn, scratch, and abrasion

Nemli G., KALAYCIOGLU H.

BUILDING AND ENVIRONMENT , cilt.41, sa.5, ss.640-645, 2006 (SCI-Expanded)

45. Yonga Rutubeti, Parafin Kullanımı Ve Ağaç Cinsinin Yongalevhanın Bazı Teknolojik Özellikleri Üzerine Etkileri

NEMLİ G., DEMİREL S., ZEKOViÇ E.

Artvin Orman Fakültesi Dergisi , cilt.7, sa.2, ss.81-93, 2006 (Hakemli Dergi)

46. YONGA RUTUBETİ PARAFİN KULLANIMI VE AĞAÇ CİNSİNİN YONGALEVHANIN BAZI TEKNOLOJİK ÖZELLİKLERİ ÜZERİNE ETKİLERİ

NEMLİ G., DEMİREL S., ZEKOVİÇ E.

Artvin Orman Fakültesi Dergisi , cilt.7, sa.2, ss.81-93, 2006 (Hakemli Dergi)

47. Influence of coatıng materıal types on the some Qualıty propertıes of partıcleboard

ÖZDEMİR T., NEMLİ G., AKBULUT T.

İstanbul Üniversitesi Orman Fakültesi Dergisi , cilt.55, sa.2, ss.87-95, 2005 (Hakemli Dergi)

48. Some of the parameters influencing surface roughness of particleboard

Nemli G., Ozturk I., Aydin İ.

BUILDING AND ENVIRONMENT , cilt.40, sa.10, ss.1337-1340, 2005 (SCI-Expanded)

49. Effects of melamine raw paper weight, varnish type and the structure of continuous pressed laminate (CPL) on the physical, mechanical properties and decay resistance of particleboard

Nemli G., YILDIZ S., GEZER E. D.

INTERNATIONAL BIODETERIORATION & BIODEGRADATION , cilt.56, sa.3, ss.166-172, 2005 (SCI-Expanded)

50. ’Influence of Coating Material Types on the Some Quality Properties of Particleboard

ÖZDEMİR T., NEMLİ G., AKBULUT T.

İstanbul Üniversitesi Orman Fakültesi Dergisi , cilt.55, sa.2, ss.87-95, 2005 (SCI-Expanded)

51. The choosing of suitable decorative surface coating material types for interior end use applications of particleboard

Nemli G., ORS Y., KALAYCIOGLU H.

CONSTRUCTION AND BUILDING MATERIALS , cilt.19, sa.4, ss.307-312, 2005 (SCI-Expanded)

52. KAPLANMIŞ LEVHA ÜRÜNLERİNİN KULLANIMINDA VE İŞLENMESİNDE DİKKAT EDİLMESİ GEREKEN BAZI HUSUSLAR

NEMLİ G., DEMİREL S.

Artvin Orman Fakültesi Dergisi , cilt.6, ss.59-68, 2005 (Hakemli Dergi)

53. The influence of lamination technique on the properties of particleboard

Nemli G., Colakoglu G.

BUILDING AND ENVIRONMENT , cilt.40, sa.1, ss.83-87, 2005 (SCI-Expanded)

54. Influence of Mimosa Bark Usage on the Some Properties of Particleboard

NEMLİ G., ÇOLAKOĞLU G.

TURKISH JOURNAL OF AGRICULTURE AND FORESTRY , sa.29, ss.277-230, 2005 (Scopus)

55. Influence of impregnating wood particles with mimosa bark extract on some properties of particleboard

Nemli G., KIRCI H., TEMIZ A.

INDUSTRIAL CROPS AND PRODUCTS , cilt.20, sa.3, ss.339-344, 2004 (SCI-Expanded, Scopus)

56. Laminat Malzemeler

NEMLİ G., Öztürk İ., AYDIN A.

Kafkas Üniversitesi, Artvin Orman Fak. Dergisi , cilt.1, sa.2, ss.55-60, 2004 (Hakemli Dergi)

57. ’Pres Çeşidinin Yonga Levha Teknik Özellikleri Üzerine Etkisi

NEMLİ G., KALAYCIOGLU H., AKBULUT T.

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi , cilt.1, sa.2, ss.89-95, 2004 (SCI-Expanded)

58. Laminat Malzemelerde Dizayn Seçenekleri

NEMLİ G., AYDIN İ., Öztürk İ.

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi , cilt.1, sa.2, ss.96-101, 2004 (SCI-Expanded)

59. Influence of Melamine Formaldehyde Addition into the Urea Formaldehyde Adhesive on Some Properties of Particleboard

NEMLİ G., AKBULUT T.

İstanbul Üniversitesi Orman Fakültesi Dergisi , cilt.54, sa.1, ss.1-8, 2004 (SCI-Expanded)

60. Influences of some manufacturing factors on the important quality properties of melamine-impregnated papers

Nemli G., USTA M.

BUILDING AND ENVIRONMENT , cilt.39, sa.5, ss.567-570, 2004 (SCI-Expanded)

61. Kalaycıoğlu, H., Nemli,G., 2004, Orman Endüstrisinin Çevre Kirliliği Üzerine Etkileri

KALAYCIOĞLU H., NEMLİ G.

Mobilya Dekorasyon , cilt.9, sa.58, ss.66-76, 2004 (Hakemli Dergi) Sürdürülebilir Kalkınma

62. Orman Endüstrisinin Çevre Kirliliği Üzerine Etkileri

KALAYCIOĞLU H., NEMLİ G.

Mobilya Dekorasyon Dergisi , sa.58, ss.66-76, 2004 (Hakemsiz Dergi) Sürdürülebilir Kalkınma

63. Some of the properties of particleboard made from Kenaf as quality control tool

KALAYCIOĞLU H., NEMLİ G., Hızıroğlu S.

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON QUALITY RELIABILITY AND MAINTENANCE , ss.31-34, 2004 (Hakemli Dergi)

64. Levha Endüstrisinde Yüzey Kaplama İşlemleri

NEMLİ G., KALAYCIOĞLU H.

Ağaç Makineleri , cilt.3, sa.13, ss.28-33, 2004 (Hakemsiz Dergi)

65. Effect of residue type and tannin content on properties of particleboard manufactured from black locust

Nemli G., HIZIROGLU S., USTA M., SERIN Z., OZDEMIR T., KALAYCIOGLU H.

FOREST PRODUCTS JOURNAL , cilt.54, sa.2, ss.36-40, 2004 (SCI-Expanded)

66. The changes in important quality properties of continuous pressed laminates (CPL) with some changes in thickness and press parameters

Nemli G., GEZER E. D., HIZIROGLU S.

BUILDING AND ENVIRONMENT , cilt.38, sa.7, ss.913-917, 2003 (SCI-Expanded)

67. Effects of some manufacturing factors on the properties of particleboard manufactured from alder (Alnus glutinosa subsp.Barbata)

NEMLİ G.

Turkish Journal of Agriculture and Forestry , cilt.27, sa.2, ss.99-104, 2003 (Scopus)

68. Effects of Some Manufacturing Factors on The Properties of Particleboard Manufactured from Alder

NEMLİ G.

Turkish Journal of Agriculture and Forestry , cilt.27, ss.99-104, 2003 (SCI-Expanded)

69. ’Effects of Juvenile Wood on the Some Physical and Mechanical Properties of Particleboards Made from Black Locust

NEMLİ G., AKBULUT T.

İstanbul Üniversitesi Orman Fakültesi Dergisi , cilt.53, sa.2, ss.75-83, 2003 (SCI-Expanded)

70. Suitability of kiwi (Actinidia sinensis Planch.) prunings for particleboard manufacturing

Nemli G., KIRCI H., SERDAR B., AY N.

INDUSTRIAL CROPS AND PRODUCTS , cilt.17, sa.1, ss.39-46, 2003 (SCI-Expanded) Sürdürülebilir Kalkınma

71. Douglas Göknarı (Pseudotsuga menziesii (Mirb.) Franco) Odununun Yonga Levha Üretimi İçin Uygunluğunun Belirlenmesi

NEMLİ G., KALAYCIOĞLU H., AY N., Şahin H.

ARTVİN ÇORUH ÜNİVERSİTESİ ORMAN FAKÜLTESİ DERGİSİ , cilt.3, sa.1, ss.17-24, 2002 (Hakemli Dergi)

72. Factors Affecting the Production of E1 Type Particleboard

NEMLİ G.

Turkish Journal of Agriculture and Forestry , cilt.26, ss.31-36, 2002 (SCI-Expanded)

73. Effects of surface coating materials on the thermal conductivity and combustion prropertiesb of particleboard

Nemli G., Kalaycıoğlu H.

Turkish Journal of Agriculture and Forestry , cilt.26, sa.3, ss.155-160, 2002 (Hakemli Dergi)

74. Yalancı Akasya (Robinia Pseudoacacia L.) Odunundan Üretilen Yonga Levhalarda Tomruk Depolama Süresi Ve Kabuk Oranının Formaldehit Emisyonuna Etkisi

NEMLİ G., ÇOLAKOĞLU G., ÇOLAK S., AYDIN İ.

İ.Ü. Orman Fakültesi Dergisi , cilt.A-52, sa.2, ss.77-83, 2002 (Hakemli Dergi)

75. Laminat Endüstrisinde Üre ve Melamin Formaldehit Tutkalları

NEMLİ G., ÇOLAK S.

Ağaç Makineleri Teknoloji ve Araştırma Dergisi , sa.4, ss.46-48, 2002 (Hakemsiz Dergi)

76. Ahşap Sanayinde Melamin Formaldehit (MF) ve Melamin/Üre Formaldehit (MÜF) yapıştırıcılarının Kullanımı

ÇOLAKOĞLU G., AYDIN İ., NEMLİ G., ÇOLAK S.

Mobilya Dekarasyon Dergisi , sa.47, ss.131-138, 2002 (Hakemsiz Dergi)

77. Suitability of date palm (Phoenix dactyliferia) branches for particleboard production

Nemli G., KALAYCIOGLU H., ALP T.

HOLZ ALS ROH-UND WERKSTOFF , cilt.59, sa.6, ss.411-412, 2001 (SCI-Expanded)

78. Ağaç Levha Endüstrisinde Formaldehit Emisyonu ve Azaltıcı Yöntemler

ÇOLAK S., NEMLİ G.

Mobilya Dekorasyon Dergisi , sa.44, ss.18-24, 2001 (Hakemsiz Dergi)

79. Ağaç Levha Endüstrisinde Kağıt Folyolar

NEMLİ G., KALAYCIOĞLU H.

Laminart Mobilya, Dekorasyon, Sanat ve Tasarım Dergisi , sa.8, ss.148-150, 2000 (Hakemsiz Dergi)

80. Yongalevha Teknolojisi

NEMLİ G., KALAYCIOĞLU H.

Laminart Mobilya Dekorasyon Dergisi , sa.7, ss.120-126, 2000 (Hakemsiz Dergi)

81. Yongalevha Teknolojisi120-126

NEMLİ G., KALAYCIOĞLU H.

Laminart Mobilya Dekorasyon , cilt.2, sa.7, ss.120, 2000 (Hakemsiz Dergi)

82. Yüzey Kaplama Malzemelerinin Mutfak Dolabı Üretiminde Kullanılan Yongalevha Fiziksel, Mekanik Özelliklerine Etkileri, ve Yüzey Kalite Özellikleri, Kısım 1: Fiziksel Özellikler Üzerine Etkiler

ÖZDEMİR T., KALAYCIOGLU H., MALKOÇOĞLU A., NEMLİ G.

Turkish Journal of Agriculture and Forestry , cilt.23, sa.4, ss.969-976, 1999 (SCI-Expanded)

83. Melamin Emdirilmiş Kağıtlarla Kaplamanın Yongalevha Teknik Özellikleri Üzerine Etkileri

NEMLİ G., KALAYCIOGLU H.

Turkish Journal of Agriculture and Forestry , cilt.23, sa.1, ss.25-31, 1999 (SCI-Expanded)

84. Yüzey Kaplama Malzemelerinin Mutfak Dolabı Üzerinde Kullanılan Yongalevhaların Fiziksel, Mekanik Özelliklerine Etkileri ve Yüzey Kalite Özellikleri, Kısım 1. Fiziksel Özellikleri Üzerine Etkiler

ÖZDEMİR T., KALAYCIOĞLU H., MALKOÇOĞLU A., NEMLİ G.

Turkish Journal of Agriculture and Forestry , cilt.23, sa.4, ss.969-976, 1999 (SCI-Expanded)

85. Yongalevha Endüstrisinde Kenar Kaplama Malzemeleri

NEMLİ G., KALAYCIOĞLU H.

Mobilya Dekorasyon Dergisi , sa.29, ss.8-10, 1999 (Hakemsiz Dergi)

86. Yongalevha Endüstrisinde Sıvı Yüzey İşlemleri

NEMLİ G., KALAYCIOĞLU H.

Mobilya Dekorasyon , cilt.5, sa.25, ss.86-94, 1998 (Hakemli Dergi)

87. Biological, physical and mechanical properties of particleboard manufactured from waste tea leaves

YALINKILIC M., IMAMURA Y., TAKAHASHI M., KALAYCIOGLU H., Nemli G., DEMIRCI Z., et al.

INTERNATIONAL BIODETERIORATION & BIODEGRADATION , cilt.41, sa.1, ss.75-84, 1998 (SCI-Expanded)

88. Yongalevhada Laminasyon (Lamination in chipboard)

KALAYCIOĞLU H., NEMLİ G.

Mobilya Dekorasyon Dergisi , cilt.6, sa.12, ss.30-47, 1996 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 40

1. INCREASING THE OUTDOOR DURABILITY OF UREA FORMALDEHYDE PARTICLEBOARDS WITH NEW GENERATION WATER-BORNE ACRYLIC COATINGS

ÖZGENÇ Ö., NEMLİ G.

International Forest Products Congress (ORENKO 2020), Trabzon, Türkiye, 23 - 24 Eylül 2020, (Özet Bildiri)

2. Odun lifi ve halıflex Atıklarından üretilen Liflevhaların Bazı Mekanik ve Fiziksel Özellikleri

USTAÖMER D., NEMLİ G.

3. International Mediterranean Forest and Environment Symposium, 3 - 05 Ekim 2019, (Tam Metin Bildiri)

3. Odun Lifi ve Halıfleks Atıklarindan Üretilen Liflevhaların Bazı Mekanik ve Fiziksel Özellikleri

USTAÖMER D., NEMLİ G.

3.International Mediterrenean Forest and Environment Symposium, Kahramanmaraş, Türkiye, 3 - 05 Ekim 2019, (Tam Metin Bildiri)

4. Technological properties of three layered particleboard with textile dust in the middle layer

AYRILMIŞ N., NEMLİ G., ÖZDEMİR F., DÜNDAR T.

IV. International Ege Composite Materials Symposium, Kompege, 6 - 08 Eylül 2018, (Tam Metin Bildiri)

5. Comparison of Mechanical and Thermal Properties of Waste and Neat Polypropylene

GÜNDÜZ G., AYDEMİR D., SÖZEN E., NEMLİ G.

THE INTERNATIONAL FOREST PRODUCTS CONGRESS, Trabzon, Türkiye, 26 - 29 Eylül 2018, ss.493-500, (Tam Metin Bildiri)

6. The Changes in The Thickness Swelling of The Particlboard Related to The Board Density and Adhesive Type

BAHAROĞLU M., NEMLİ G.

ORENKO 2018- International Forest Products Congress, Trabzon, Türkiye, 26 - 29 Eylül 2018, (Özet Bildiri)

7. TECHNOLOGICAL PROPERTIES OF THREE-LAYEREDPARTICLABOARD WITH TEXTILE DUST IN THE MIDDLE LAYER

AYRILMIŞ N., NEMLİ G., ÖZDEMİR F., DÜNDAR T.

IV. International Ege Composite Materials SymposiumKOMPEGE 2018, İzmir, Türkiye, 6 - 08 Eylül 2018, ss.698-703, (Tam Metin Bildiri)

8. INFLUENCES OF ADHESIVE TYPE AND BOARD DENSITY ON THE MECHANICAL PROPERTIES OF PARTICLEBOARD

BAHAROĞLU M., NEMLİ G.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, (Özet Bildiri)

9. Effect of Adhesive Type on Flame Resistance, Formaldehyde Emission and Physico-Mechanical Properties of Particleboards

ARAS U., KALAYCIOĞLU H., YEL H., NEMLİ G.

International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.1755-1763, (Tam Metin Bildiri)

10. Orman Ürünleri Sanayiinde İstatistiksel Proses Kontrol Uygulamaları,

AYDIN A., TİRYAKİ S., ADANUR H., ÜÇÜNCÜ K., NEMLİ G.

International Symposium of Applied Business, Managementand Economics Researches, 3 - 05 Mayıs 2018, ss.33, (Özet Bildiri) Sürdürülebilir Kalkınma

11. Orman Ürünleri Sanayinde İstatistiksel Proses Kontrol Uygulamaları

AYDIN A., TİRYAKİ S., ADANUR H., ÜÇÜNCÜ K., NEMLİ G.

International Symposium of Applied Business Management and Economics Researches ISABMER, Bayburt, Türkiye, 3 - 05 Mayıs 2018, cilt.1, ss.33, (Özet Bildiri) Sürdürülebilir Kalkınma

12. Effects of sodium hydroxide treatment of particles on the quality properties of particleboard

NEMLİ G., BARDAK S.

International Symposium on New Horizons in Forestry, 18 - 20 Ekim 2017, (Tam Metin Bildiri)

13. The influence of sapwood and heartwood usage on the quality properties of particleboard

NEMLİ G., BARDAK S.

International Symposium on New Horizons in Forestry, 18 - 20 Ekim 2017, (Özet Bildiri)

14. The İnfluence of Sapwood and Heartwood Usage on The Quality Properties of Particleboard

NEMLİ G., BARDAK S.

International Symposium on New Horizons in Forestry, 18 - 20 Ekim 2017, ss.467, (Özet Bildiri)

15. EFFECT OF ADHESIVE TYPE ON THE QUALITY PROPERTIES OF PARTICLEBOARD

AYRILMIŞ N., NEMLİ G.

XIV. International Scientific Congress, Summer Session, Machines, Technologies, Materials, 13 - 16 Eylül 2017, cilt.7, ss.519-520, (Tam Metin Bildiri)

16. Use of screening machine wastes for Manufacturing of particleboard composite

BARDAK S., NEMLİ G.

International Conference on Agriculture, Forest, Food Sciences and Technologies, 15 - 17 Mayıs 2017, ss.472, (Özet Bildiri)

17. The effect of sanding pad type on the surface quality of particle Boards

Kara M. E., NEMLİ G., SAÇLI C., BİÇER E., AYRILMIŞ N.

International Conference on Agriculture, Forest, Food Sciences and Technologies, 15 - 17 Mayıs 2017, ss.431, (Özet Bildiri)

18. Effects of Core Layer Particle Sizes on the some mechanical and physical properties of particleboard

Kara M. E., NEMLİ G., Karakaya B., AYRILMIŞ N.

International Conference on Agriculture, Forest, Food Sciences and Technologies, 15 - 17 Mayıs 2017, ss.548, (Özet Bildiri)

19. Feasibility of incorporating Ailanthus altissima (Mill.) Swingle wood in particleboard composite

BARDAK S., NEMLİ G.

International Forestry Symposium, IFS, Kastamonu, Türkiye, 7 - 10 Aralık 2016, ss.718-725, (Tam Metin Bildiri)

20. Effect of lamination conditions on technological properties of HDF laminate parquet

NEMLİ G., Özçifçi A., Kara M. E., Çelik Ü.

II nd International Furniture Congress, Muğla, Türkiye, 13 - 15 Ekim 2016, ss.190-196, (Özet Bildiri)

21. Properties of Cotton Ball Cement Bonded Particleboard Abstract of Workshop on Adding Value Through Physical Functionality

İSTEK A., AKSU S., KALAYCIOĞLU H., NEMLİ G., NEMLİ G.

WORKSHOP on Adding Value through Physical Functionality -COST E49, 28 - 29 Nisan 2009, (Tam Metin Bildiri)

22. The Effect of Resin Type on the Some Quality Properties of Laminated Decor Papers

İstek A., Aksu S., KALAYCIOĞLU H., NEMLİ G.

COST E49 Processes and Performance of Wood-Based Panels, Workshop, Adding Value Through Physical Functionality,, İstanbul, Türkiye, 28 - 29 Nisan 2009, ss.24, (Tam Metin Bildiri)