Dr. &#214;ğr. &#220;yesi SERDAR &#214;ZKAYA

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.644, ss.589-596, 2015 (SCI-Expanded)

Development and characterization of bronze-Cr-Ni composites produced by powder metallurgy

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.22, sa.4, ss.425-432, 2015 (SCI-Expanded)

New Coating Technique for Al-B4C Composite Coatings by Mechanical Milling and Composite Coating

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

POWDER METALLURGY AND METAL CERAMICS , cilt.53, sa.11-12, ss.672-679, 2015 (SCI-Expanded)

SYNTHESIS AND CHARACTERIZATION OF HYBRID NANOCOMPOSITE POWDERS VIA MECHANICAL ALLOYING

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.45, sa.1, ss.67-72, 2015 (SCI-Expanded)

Effects of a new pre-milling coating process on the formation and properties of an Fe-Al intermetallic coating

ÇANAKÇI A., ERDEMİR F., VAROL T., Dalmis R., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.268, ss.110-117, 2014 (SCI-Expanded)

Effect of process parameters on the formation of Fe-Al intermetallic coating fabricated by mechanical alloying

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.21, sa.6, ss.595-600, 2014 (SCI-Expanded)

Microstructure and Abrasive Wear Behavior of CuSn10-Graphite Composites Produced by Powder Metallurgy

ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

POWDER METALLURGY AND METAL CERAMICS , cilt.53, ss.275-287, 2014 (SCI-Expanded)

Microstructure and properties of Fe-Al intermetallic coatings on the low carbon steel synthesized by mechanical alloying

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., Mindivan H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.73, ss.849-858, 2014 (SCI-Expanded)

Synthesis of novel CuSn10-graphite nanocomposite powders by mechanical alloying

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

MICRO & NANO LETTERS , cilt.9, sa.2, ss.109-112, 2014 (SCI-Expanded)

Formation of Fe-Al intermetallic coating on low-carbon steel by a novel mechanical alloying technique

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.247, ss.24-29, 2013 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Production and Investigation of Properties of Nickel Particle Reinforced AA5083 Matrix Metal-Metal Composites

Özkaya S.

Gazi Mühendislik Bilimleri Dergisi , cilt.10, sa.2, ss.347-354, 2024 (Hakemli Dergi)

Advanced antibacterial effect of bioactive natural hydroxyapatite biocomposites

ÖZKAYA S., GÜLER O.

Studies in Natural Products Chemistry , cilt.82, ss.55-112, 2024 (Scopus)

Comparison of the abrasive effects of children's toothpaste on glass ionomer cement

YILMAZ N., AVCI G., ÖZKAYA S., TÜZÜNER T., BAYGIN Ö.

PEDIATRIC DENTAL JOURNAL , cilt.31, sa.2, ss.145-151, 2021 (ESCI)

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.

UNIVERSAL JOURNAL OF MATERIALS SCIENCE , cilt.6, sa.5, ss.163-169, 2018 (Hakemli Dergi)

PRODUCTION AND PROPERTIES OF AL2024-2 WT. (SiC-B4C) HYBRID NANOCOMPOSITE

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

Technological Applied Sciences , cilt.13, sa.1, ss.29-33, 2018 (Hakemli Dergi)

Determination of Effect of B4C Content on Density and Tensile Strength of AA7075/ B4C Composite Produced via Powder Technology

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

International Journal of Materials, Mechanics and Manufacturing , cilt.4, sa.4, ss.251-254, 2015 (Hakemli Dergi)

Artificial Neural Network Approach to Predict the Abrasive Wear of AA2024-B4C Composites

ÇANAKÇI A., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.

Universal Journal of Materials Science , sa.6, ss.111-118, 2014 (Hakemli Dergi)

Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method

ÇANAKÇI A., VAROL T., ÖZKAYA S., ERDEMİR F.

Universal Journal of Materials Science , cilt.2, ss.90-95, 2014 (Hakemli Dergi)

Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying method

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S., Dalmış R.

Usak University Journal of Material Sciences , sa.1, ss.15-22, 2014 (Hakemli Dergi)

Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloying

Nazik C., Tarakçıoğlu N., ÇANAKÇI A., VAROL T., ÖZKAYA S.

Usak University Journal of Material Sciences , sa.1, ss.47-53, 2014 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

AA5083-Cr Composite Example in terms of Production and Investigation of Metal-Metal Composites

AKDENIZ 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Girne, Kıbrıs (Kktc), 2 - 05 Kasım 2023, ss.25-29

Fabrication and Characterization of AA5083-Ni Metal-Metal Composites

AKDENIZ 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Girne, Kıbrıs (Kktc), 2 - 05 Kasım 2023, ss.15-20

MICROSTRUCTURAL AND MECHANICAL RESPONSE OF Al2024/H-BN/B4C HYBRID NANOCOMPOSITES TO VARYING H-BN CONTENT VIA POWDER METALLURGY

Çelebi M., Çanakçı A., Karabacak A. H., Özkaya S.

5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS , Rize, Türkiye, 8 - 10 Kasım 2023, ss.1351-1356

EFFECT OF H-BN CONTENT ON MORPHOLOGY, PARTICLE SIZE, AND MICROHARDNESS OF Al2024/B4C/h-BN HYBRID NANOCOMPOSITE POWDERS

Çelebi M., Karabacak A. H., Özkaya S., Tunç S. A.

5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Rize, Türkiye, 8 - 10 Kasım 2023, ss.1357-1364

Effect Of Sınterıng Temperature On Some Mechanıcal Propertıes Of Hydroxyapatıte Matrıx Ag-Reınforced Bıomaterıals

KARADENİZ 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Batumi, Gürcistan, 13 - 15 Ekim 2023, ss.27-35

Effect Of Secondary Phases On The Mehcanıcal And Antıbacterıal Propertıes Of Hydroxyapatıte Matrıx Cnt Reınforced Bıocomposıtes

Gedik Gültekin G., Çanakçı A., Özkaya S., Canpolat Ö.

KARADENİZ 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Batumi, Gürcistan, 13 - 15 Ekim 2023, ss.36-43

FABRICATION OF Ti-HAP-CNT HYBRID COMPOSITE BIOMATERIALS AND INVESTIGATION OF PROPERTIES

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.

UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.86-96

FABRICATION and PROPERTIES INVESTIGATION of FeNiCuCrAl-1% B4C HIGH ENTROPY ALLOY

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.

UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.97-108

PRODUCTION AND PROPERTİES OF TI-HAP-CNT HYBRID BIOMATERIAL POWDERS BY POWDER

Karabacak A. H., Çanakçı A., Özkaya S., Çelebi M.

2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.320-334

FABRICATION AND PROPERTIES OF FENICUCRAL HIGH ENTROPY ALLOYS BY POWDER METALLURGY

Karabacak A. H., Çelebi M., Özkaya S., Tunç S. A.

2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.335-345

Investigation of the Effect of TiH2 Amount on Foaming in AA2024 Based Metallic Foams Produced by Powder Metallurgy

Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.

2. BİLSEL International World Science and Research Congress, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.410-416

Effect of Proccess Control Agents and Milling Time on the Powder Properties of AA2024/Cu Metal Matrix Composites

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.166

The effect of mechanical milling parameters on the properties of AA2024- 2 wt.% Cu composites produced by powder metallurgy

Gedik Gültekin G., Çanakçı A., Özkaya S., Canpolat Ö.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.167

Investigation of the Effect of Temperature and Foaming Time on AA2024 Based Metal Foam Production

Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 Kasım - 03 Aralık 2021, ss.494-497

Machining of Metal Matrix Hybrid Nanocomposites with WEDM Method

Karabacak A. H., Çanakçı A., Tunç S. A., Özkaya S.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.502-506

Corrosion performance of AA2024-316L SS Metal-Metal composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Production of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposites by Powder Metallurgy Method and Investigation of Mechanical Properties

Özkaya S., Çanakçı A., Karabacak A. H., Çanakçı S., Ceylan E.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Synthesis and Investigation of Antibacterial Activity of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposite

Özkaya S., Çanakçı A., Çanakçı S., Ceylan E.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Wear Behavior of AA2024-316L SS Metal Metal Composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F., Çelebi M.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Production and Comparison of Properties of B4C and SiC Reinforced Nanocomposites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.716-720

The Effect of Mechanical milling on the Microstructure and Particle Morphology of ZnAl40Cu2/B4C/GrapheneHybridNanocomposites

ÇELEBİ M., ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.1162-1165

Mechanical and Physical Properties of Al2024-B4C/SiC Hybrid Nanocomposite by Fabrication Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.710-715

Fabrication and Investigation of Properties of Hydroxyapatite CNT Bioceramics

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.645-650

The Effect of Hex-Boron Nitride Content on the Mechanical and Tribological Properties of Al-Based Alloy Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.1157-1161

Consodilation and Investigation of Properties of Hydroxyapatite-316L Stainless Steel Composites

Karabacak A. H., Özkaya S., Çanakçı A., Varol T., Çelebi M., Erdemir F.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.828-834

PRODUCTION OF Al2024 FOAMS BY POWDER SPACE HOLDER TECHNIQUE

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.5-7

The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., VAROL T.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.1752-1756

The Investigation of Wear Performance of Fe/B4C/Graphene Hybrid Nanocomposites

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., ERDEMİR F.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.23

Effect of powder morphology on properties of Metal Matrix Composite Materials

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A.

International Advanced Researches & Engineering Congress, Osmaniye, Türkiye, 16 - 18 Kasım 2017, ss.800

Production and Properties of Al2024- 2 wt. (SiC-B4C) HybridNanocomposite

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1322-1327

Production of Biomaterials by Powder Metallurgy Methods and Applications

ÖZKAYA S., ÇANAKÇI A., ÇELEBİ M., KESKİN Ö. Y.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.26-29

Production of Aluminum foam with TiH2

ÇANAKÇI A., ÖZKAYA S., KESKİN Ö. Y.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1900-19002

Characterization and Mechanical Properties of Al2024-SiC Nanocomposites Fabricated by Mechanical Alloying

KARABACAK A. H., ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1299-1304

Microstructure and Mechanical Properties of Al2024-B4C Nanocomposite Produced by Mechanical Alloying and Hot Pressing Method

KARABACAK A. H., ÖZKAYA S., ÇANAKÇI A., ÇALIGÜLÜ U.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1285-1289

Metal Foams Produced by Powder Metallurgy Methods and Applications

ÇANAKÇI A., KESKİN Ö. Y., ÖZKAYA S., ÇELEBİ M.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.27-30

A Review on The Powder Coating with Mechanical Milling

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Eylül 2017, ss.228-232

Application of Artificial Neural Network for Prediction of Coating Thickness in Fe-Al Coatings

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Ekim 2017, ss.210-214

A Review on the New Armour Ceramic Meterials

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.381-385

Effect of Processing Parameters on AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ÇELEBİ M., KARABACAK A. H.

Uluslararası 2. Savunma Sanayi Sempozyumu, 6 - 08 Nisan 2017, ss.636-640

Fabrication of B4C Reinforced Al 5083 Matrix Composite Materials by Using Mechanical Alloying and Investigation of Their Properties

OKUR O., ÖZKAYA S., ÇANAKÇI A., ÇALIN R.

Fabrication of B4C Reinforced Al 5083 Matrix Composite Materials Using byMechanical Alloying and Investigation of Their Properties, 6 - 08 Nisan 2017

Fonksiyonel Derecelendirilmiş Al2024/ B4C Nanokompozitlerinin Balistik Performansları

ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.

2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU (IDEFIS 2017), Kırıkkale, Türkiye, 6 - 08 Nisan 2017, cilt.2, ss.16-20

Effect of Processing Parameters on Functionally Graded AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., ÇELEBİ M., KESKİN Ö. Y., KARABACAK A. H.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.636-640

Metal Foams

VAROL T., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.641-649

The ballistic performance of Functionally Graded Al2024/B4C Nanocomposites

ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.650-656

Properties of Silicon Carbide Reinforced Nanocomposites Prepared by Flake Powder Metallurgy Processing

VAROL T., ÇANAKÇI A., YALÇIN E. D., ÖZKAYA S.

16th International Materials Symposium, 12 - 14 Ekim 2016, ss.1346-1352

EFFECT OF MECHANICAL ALLOYING ON CORROSION BEHAVIOUR OF AlCuMg B 4 C NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

14.ULUSLARASI KOROZYON SEMPOZYUMU, 5 - 07 Ekim 2016, ss.526-530

Devolopment of surface response methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016, ss.2025-2030

Development of response surface methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016, ss.2025-2030

Metallic Biomaterials Biocompability and Mechanical Properties

VAROL T., ÇANAKÇI A., ÇUVALCI H., ÖZKAYA S.

16th International Materials Symposium, 12 - 16 Ekim 2016, ss.1102-1109

Corrosion properties of Al2024/SiC composites compared with Al2024/B4C composites.

ERDEMİR F., ÇANAKÇI A., ÖZKAYA S., YALÇIN E. D.

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Türkiye, 5 - 07 Ekim 2016, sa.55, ss.23-26

Mekanik Alaşımlamanın AlCuMg/B4C Nanokompozitlerinin Korozyon Davranışı Üzerine Etkisi

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.526-530

Study on Microstructure and Wear Properties of B4C Nanoparticles reinforced ZA27 nanocomposites

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., VAROL T.

International Conference of Engineering and Natural Sciences, 24 - 28 Mayıs 2016, ss.2850-2853

Corrosion Behavior of AlCuMg B4C Nanocomposites Produced by Powder Metallurgy

ICENS2016, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2846-2849

Investigation of Properties of CNT Reinforced HA Biocomposites Produced by Mechanical Alloying Technique

ÇANAKÇI A., ÖZKAYA S., VAROL T., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.361

Study on Microstructure and Wear Properties of B4C Nanoparticle Reinforced ZA27 Nanocomposites

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., VAROL T.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2850-2853

Corrosion Behavior of AlCuMg/B4C Nanocomposites Produced by Powder Metallurgy Method

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2846-2849

Functionally Graded Materials

VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.1643-1649

Determination of Effect of B4C Content on Densityand Tensile Strength of AA7075 B4C Composite Produced via Powder Technology

NAZİK C., TARAKÇIOĞLU N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

OPTIROB, ICAEM, ICREB 2015, 26 - 29 Haziran 2015

THE EFFECT OF MILLING TIME ON MECHANICAL PROPERTIES OF ALCUMG-B4C NANOCOMPOSITES PRODUCED BY HIGH ENERGY MILLING

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Aralık 2015, ss.26-30

EFFECT OF B4C CONTENT AND MILLING TIME ON WEAR BEHAVIOUR OF MECHANICALLY ALLOYED AlCuMg NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.173-179

EFFECT OF MECHANICAL ALLOYING ON MECHANICAL PROPERTIES OF AlCuMg-B4C NANOCOMPOSITES

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.186-192

THE MICROSTRUCTURE OF NANO B4C PARTICLE REINFORCED Al-Cu-Mg ALLOY MATRIX NANOMPOSITES PRODUCED BY FLAKE POWDER METALLURGY METHOD

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.585-590

B4C ve Grafen Nano Parçacıkları ile Güçlendirilmiş ZA27 Alaşımının Mikro Yapısı ve Aşınma Davranışlarının İncelenmesi

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

MÜHENDİSLİKTE YENİ TEKNOLOJİLER SEMPOZYUMU MYT 2015, Bayburt, Türkiye, 22 - 24 Ekim 2015, ss.1-4 Sürdürülebilir Kalkınma

WEAR BEHAVIOR OF AL2024/SIC COMPOSITES PRODUCED BY POWDER METALLURGY METHODS

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.11-15

EFFECT OF B4C ADDITION ON WEAR BEHAVIOUR OF AlCuMg NANOCOMPOSITES

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.16-19

PRODUCTION AND CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/SiC-B4C HYBRID COMPOSITES BY HOT PRESSING PROCESS

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.36-39

MICROSTRUCTURAL CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/Sic COMPOSITES PRODUCED BY HOT PRESSING AND CONSOLIDATION

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.31-35

THE EFFECT OF MILLING TIME AND PARTICLE SIZE ON THE FLAKE MORPHOLOGY AND FLAKE PARTICLE SIZE OF Al-Cu-Mg ALLOY POWDERS PREPARED VIA MECHANICAL MILLING

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.21-25

Production by Gas Atomization and Characterization of AA7075 Metal Powders

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A.

The International Conference On Science, Ecology And Technology I, Vienna, Avusturya, 25 - 28 Ağustos 2015, ss.446-452

Wear and Corrosion Behavior of Fe-Al Intermetallic Coatings on the Low Carbon Steel Synthesized by Mechanical Alloying

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., Mindivan H.

15th International Materials Symposium, Denizli, Türkiye, 15 - 17 Ekim 2014, ss.104-113

Effect of The Different Milling Process on The Formation of Fe-Al Intermetallic Coating on Low-Carbon Steel

ÇANAKÇI A., ERDEMİR F., VAROL T., Dalmış R., ÖZKAYA S.

15th International Materials Symposium, Denizli, Türkiye, 15 - 17 Ekim 2014, ss.88-96

Fabrication of Functionally Graded Al 2024/B4C Composites By Powder Metallurgy