Dr. Öğr. Üyesi SERDAR ÖZKAYA

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Comparative study of powder characteristics and mechanical properties of Al2024 nanocomposites reinforced with carbon-based additives

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

Advanced Powder Technology , cilt.36, sa.4, 2025 (SCI-Expanded)

Effect of mechanical milling time on powder characteristic, microstructure, and mechanical properties of AA2024/B4C/GNPs hybrid nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.449, 2025 (SCI-Expanded)

Effect of AlCrCuFeNi high entropy alloy reinforcements with and without B4C on powder characteristic, mechanical and wear properties of AA5083 metal-metal composites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., TUNÇ S. A., GÜLER O., ÇELEBİ M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.1008, 2024 (SCI-Expanded)

Exploring Metal–Metal Composites: A Study on AA5083 Matrix-Cr Particles Reinforced Composites

ÖZKAYA S.

Materials , cilt.17, sa.24, 2024 (SCI-Expanded)

A Study on the Optimization of Nano-B4C Content for the Best Wear and Corrosion Properties of the Al-Based Hybrid Nanocomposites

ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., ÖZKAYA S., Arpacı K. A.

Arabian Journal for Science and Engineering , cilt.49, sa.11, ss.14625-14641, 2024 (SCI-Expanded)

Optimization of Dry Sliding Wear in Hot-Pressed Al/B4C Metal Matrix Composites Using Taguchi Method and ANN

Gajević S., Miladinović S., GÜLER O., ÖZKAYA S., Stojanović B.

MATERIALS , cilt.17, sa.16, 2024 (SCI-Expanded)

Synthesis of hydroxyapatite matrix Ag and CNT particle reinforced hybrid biocomposites with improved mechanical and antibacterial properties

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., ÇANAKÇI S., CEYLAN E.

International Journal of Materials Research , cilt.115, sa.3, ss.190-201, 2024 (SCI-Expanded)

A study on the improvement of wear and corrosion properties of ZA40/Graphene/B4C hybrid nanocomposites

Çelebi M., Çanakçı A., Güler O., Karabacak H., Akgül B., Özkaya S.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.966, 2023 (SCI-Expanded)

Investigation of corrosion resistance and impact performance properties of Al2O3/SiC-doped aluminium-based composites

Çalıgülü U., Kaçmış M. V., Karabacak A. H., Çanakçı A., Özkaya S.

BULLETIN OF MATERIALS SCIENCE , cilt.46, sa.3, 2023 (SCI-Expanded)

The effects of different types and ratios of reinforcement, and machining processes on the machinability of Al2024 alloy nanocomposites

Karabacak A. H., Çanakçı A., Özkaya S., Tunç S. A., Çevik Z. A., Yalçın E. D.

JOURNAL OF COMPOSITE MATERIALS , cilt.57, sa.18, ss.2811-2827, 2023 (SCI-Expanded)

Mechanical properties of quenched and tempered steel welds

Uzunali U. Y., Çuvalcı H., Atmaca B., Demir S., Özkaya S.

MATERIALS TESTING , cilt.64, sa.11, ss.1662-1674, 2022 (SCI-Expanded)

Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing

ÇELEBİ M., ÇANAKÇI A., GÜLER O., ÖZKAYA S., KARABACAK A. H., Arpaci K. A.

JOM , cilt.74, sa.11, ss.4449-4461, 2022 (SCI-Expanded)

Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.

SILICON , cilt.14, sa.14, ss.8567-8579, 2022 (SCI-Expanded)

Effects of Fe-Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., KARABACAK A. H., ÇELEBİ M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.845, 2020 (SCI-Expanded)

Effect of the usage of Er,Cr:YSGG laser with and without different remineralization agents on the enamel erosion of primary teeth

Yilmaz N., Baltaci E., Baygin Ö., Tüzüner T., Ozkaya S., Canakci A.

LASERS IN MEDICAL SCIENCE , cilt.35, sa.7, ss.1607-1620, 2020 (SCI-Expanded)

Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites

KARABACAK A. H., Çanakçı A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.111, sa.5, ss.416-423, 2020 (SCI-Expanded)

Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites

VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.3, ss.312-323, 2018 (SCI-Expanded)

Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.6, ss.742-750, 2018 (SCI-Expanded)

Effect of the B4C content and the milling time on the synthesis, consolidation and mechanical properties of AlCuMg-B4C nanocomposites synthesized by mechanical milling

Ozkaya S., Canakci A.

POWDER TECHNOLOGY , cilt.297, ss.8-16, 2016 (SCI-Expanded)

Corrosion and wear behavior of functionally graded Al2024/SiC composites produced by hot pressing and consolidation

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.644, ss.589-596, 2015 (SCI-Expanded)

Development and characterization of bronze-Cr-Ni composites produced by powder metallurgy

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.22, sa.4, ss.425-432, 2015 (SCI-Expanded)

New Coating Technique for Al-B4C Composite Coatings by Mechanical Milling and Composite Coating

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

POWDER METALLURGY AND METAL CERAMICS , cilt.53, sa.11-12, ss.672-679, 2015 (SCI-Expanded)

SYNTHESIS AND CHARACTERIZATION OF HYBRID NANOCOMPOSITE POWDERS VIA MECHANICAL ALLOYING

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.45, sa.1, ss.67-72, 2015 (SCI-Expanded)

Effects of a new pre-milling coating process on the formation and properties of an Fe-Al intermetallic coating

ÇANAKÇI A., ERDEMİR F., VAROL T., Dalmis R., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.268, ss.110-117, 2014 (SCI-Expanded)

Effect of process parameters on the formation of Fe-Al intermetallic coating fabricated by mechanical alloying

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.21, sa.6, ss.595-600, 2014 (SCI-Expanded)

Microstructure and Abrasive Wear Behavior of CuSn10-Graphite Composites Produced by Powder Metallurgy

ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

POWDER METALLURGY AND METAL CERAMICS , cilt.53, ss.275-287, 2014 (SCI-Expanded)

Microstructure and properties of Fe-Al intermetallic coatings on the low carbon steel synthesized by mechanical alloying

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., Mindivan H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.73, ss.849-858, 2014 (SCI-Expanded)

Synthesis of novel CuSn10-graphite nanocomposite powders by mechanical alloying

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

MICRO & NANO LETTERS , cilt.9, sa.2, ss.109-112, 2014 (SCI-Expanded)

Formation of Fe-Al intermetallic coating on low-carbon steel by a novel mechanical alloying technique

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.247, ss.24-29, 2013 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Production and Investigation of Properties of Nickel Particle Reinforced AA5083 Matrix Metal-Metal Composites

Özkaya S.

Gazi Mühendislik Bilimleri Dergisi , cilt.10, sa.2, ss.347-354, 2024 (Hakemli Dergi)

Advanced antibacterial effect of bioactive natural hydroxyapatite biocomposites

ÖZKAYA S., GÜLER O.

Studies in Natural Products Chemistry , cilt.82, ss.55-112, 2024 (Scopus)

Comparison of the abrasive effects of children's toothpaste on glass ionomer cement

YILMAZ N., AVCI G., ÖZKAYA S., TÜZÜNER T., BAYGIN Ö.

PEDIATRIC DENTAL JOURNAL , cilt.31, sa.2, ss.145-151, 2021 (ESCI)

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

Çelebi M., Çanakçı A., Özkaya S., Karabacak A. H.

UNIVERSAL JOURNAL OF MATERIALS SCIENCE , cilt.6, sa.5, ss.163-169, 2018 (Hakemli Dergi)

PRODUCTION AND PROPERTIES OF AL2024-2 WT. (SiC-B4C) HYBRID NANOCOMPOSITE

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

Technological Applied Sciences , cilt.13, sa.1, ss.29-33, 2018 (Hakemli Dergi)

Determination of Effect of B4C Content on Density and Tensile Strength of AA7075/ B4C Composite Produced via Powder Technology

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

International Journal of Materials, Mechanics and Manufacturing , cilt.4, sa.4, ss.251-254, 2015 (Hakemli Dergi)

Artificial Neural Network Approach to Predict the Abrasive Wear of AA2024-B4C Composites

ÇANAKÇI A., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.

Universal Journal of Materials Science , sa.6, ss.111-118, 2014 (Hakemli Dergi)

Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method

ÇANAKÇI A., VAROL T., ÖZKAYA S., ERDEMİR F.

Universal Journal of Materials Science , cilt.2, ss.90-95, 2014 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Powder Characteristics and Mechanical Properties of AlCrCo Middle Entropy Alloy Synthesized via Mechanical Alloying

Özkaya S.

International Congress on Trends and Advances in Global Research and Applications (TAGRA 2024), Erzurum, Türkiye, 21 - 22 Aralık 2024, ss.99

RECYLING AND INVESTIGATION OF THE MECHANICAL PROPERTIES IN ST44 STEEL CHIPS

Özkaya S.

9th International Azerbaijan Congress on Life, Engineering, Mathematical adn Aplplied Sciences, Baku, Azerbaycan, 20 - 22 Aralık 2024, ss.74-84

TRIBOLOGICAL AND ELECTRICAL PERFORMANCE OF CNT AND B4C REINFORCED COPPER COMPOSITES

Özkaya S.

9th International Azerbaijan Congress on Life, Engineering, Mathematical and Applied Sciences, Baku, Azerbaycan, 20 - 22 Aralık 2024, ss.85-93

MICROSTRUCTURAL AND MECHANICAL RESPONSE OF Al2024/H-BN/B4C HYBRID NANOCOMPOSITES TO VARYING H-BN CONTENT VIA POWDER METALLURGY

Çelebi M., Çanakçı A., Karabacak A. H., Özkaya S.

5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS , Rize, Türkiye, 8 - 10 Kasım 2023, ss.1351-1356

EFFECT OF H-BN CONTENT ON MORPHOLOGY, PARTICLE SIZE, AND MICROHARDNESS OF Al2024/B4C/h-BN HYBRID NANOCOMPOSITE POWDERS

Çelebi M., Karabacak A. H., Özkaya S., Tunç S. A.

5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Rize, Türkiye, 8 - 10 Kasım 2023, ss.1357-1364

Effect Of Secondary Phases On The Mehcanıcal And Antıbacterıal Propertıes Of Hydroxyapatıte Matrıx Cnt Reınforced Bıocomposıtes

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.

KARADENİZ 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Batumi, Gürcistan, 13 - 15 Ekim 2023, ss.36-43

Effect Of Sınterıng Temperature On Some Mechanıcal Propertıes Of Hydroxyapatıte Matrıx Ag-Reınforced Bıomaterıals

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.

KARADENİZ 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Batumi, Gürcistan, 13 - 15 Ekim 2023, ss.27-35

FABRICATION and PROPERTIES INVESTIGATION of FeNiCuCrAl-1% B4C HIGH ENTROPY ALLOY

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.

UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.97-108

PRODUCTION AND PROPERTİES OF TI-HAP-CNT HYBRID BIOMATERIAL POWDERS BY POWDER

Karabacak A. H., Çanakçı A., Özkaya S., Çelebi M.

2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.320-334

Investigation of the Effect of TiH2 Amount on Foaming in AA2024 Based Metallic Foams Produced by Powder Metallurgy

Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.

2. BİLSEL International World Science and Research Congress, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.410-416

FABRICATION AND PROPERTIES OF FENICUCRAL HIGH ENTROPY ALLOYS BY POWDER METALLURGY

Karabacak A. H., Çelebi M., Özkaya S., Tunç S. A.

2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.335-345

Effect of Proccess Control Agents and Milling Time on the Powder Properties of AA2024/Cu Metal Matrix Composites

Gedik Gültekin G., Çanakçı A., Özkaya S., Canpolat Ö.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.166

The effect of mechanical milling parameters on the properties of AA2024- 2 wt.% Cu composites produced by powder metallurgy

Gedik Gültekin G., Çanakçı A., Özkaya S., Canpolat Ö.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.167

Investigation of the Effect of Temperature and Foaming Time on AA2024 Based Metal Foam Production

Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 Kasım - 03 Aralık 2021, ss.494-497

Machining of Metal Matrix Hybrid Nanocomposites with WEDM Method

Karabacak A. H., Çanakçı A., Tunç S. A., Özkaya S.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.502-506

Wear Behavior of AA2024-316L SS Metal Metal Composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F., Çelebi M.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Corrosion performance of AA2024-316L SS Metal-Metal composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Synthesis and Investigation of Antibacterial Activity of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposite

Özkaya S., Çanakçı A., Çanakçı S., Ceylan E.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Production of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposites by Powder Metallurgy Method and Investigation of Mechanical Properties

Özkaya S., Çanakçı A., Karabacak A. H., Çanakçı S., Ceylan E.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Production and Comparison of Properties of B4C and SiC Reinforced Nanocomposites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.716-720

The Effect of Hex-Boron Nitride Content on the Mechanical and Tribological Properties of Al-Based Alloy Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.1157-1161

Fabrication and Investigation of Properties of Hydroxyapatite CNT Bioceramics

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.645-650

Mechanical and Physical Properties of Al2024-B4C/SiC Hybrid Nanocomposite by Fabrication Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.710-715

The Effect of Mechanical milling on the Microstructure and Particle Morphology of ZnAl40Cu2/B4C/GrapheneHybridNanocomposites

ÇELEBİ M., ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.1162-1165

Consodilation and Investigation of Properties of Hydroxyapatite-316L Stainless Steel Composites

Karabacak A. H., Özkaya S., Çanakçı A., Varol T., Çelebi M., Erdemir F.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.828-834

PRODUCTION OF Al2024 FOAMS BY POWDER SPACE HOLDER TECHNIQUE

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.5-7

The Investigation of Wear Performance of Fe/B4C/Graphene Hybrid Nanocomposites

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., ERDEMİR F.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.23

The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., VAROL T.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.1752-1756

Production of Aluminum foam with TiH2

ÇANAKÇI A., ÖZKAYA S., KESKİN Ö. Y.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1900-19002

Characterization and Mechanical Properties of Al2024-SiC Nanocomposites Fabricated by Mechanical Alloying

KARABACAK A. H., ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1299-1304

Microstructure and Mechanical Properties of Al2024-B4C Nanocomposite Produced by Mechanical Alloying and Hot Pressing Method

KARABACAK A. H., ÖZKAYA S., ÇANAKÇI A., ÇALIGÜLÜ U.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1285-1289

Production of Biomaterials by Powder Metallurgy Methods and Applications

ÖZKAYA S., ÇANAKÇI A., ÇELEBİ M., KESKİN Ö. Y.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.26-29

Metal Foams Produced by Powder Metallurgy Methods and Applications

ÇANAKÇI A., KESKİN Ö. Y., ÖZKAYA S., ÇELEBİ M.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.27-30

A Review on The Powder Coating with Mechanical Milling

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Eylül 2017, ss.228-232

Application of Artificial Neural Network for Prediction of Coating Thickness in Fe-Al Coatings

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Ekim 2017, ss.210-214

Effect of Processing Parameters on AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ÇELEBİ M., KARABACAK A. H.

Uluslararası 2. Savunma Sanayi Sempozyumu, 6 - 08 Nisan 2017, ss.636-640

Fonksiyonel Derecelendirilmiş Al2024/ B4C Nanokompozitlerinin Balistik Performansları

ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.

2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU (IDEFIS 2017), Kırıkkale, Türkiye, 6 - 08 Nisan 2017, cilt.2, ss.16-20

Metal Foams

VAROL T., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.641-649

EFFECT OF MECHANICAL ALLOYING ON CORROSION BEHAVIOUR OF AlCuMg B 4 C NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

14.ULUSLARASI KOROZYON SEMPOZYUMU, 5 - 07 Ekim 2016, ss.526-530

Metallic Biomaterials Biocompability and Mechanical Properties

VAROL T., ÇANAKÇI A., ÇUVALCI H., ÖZKAYA S.

16th International Materials Symposium, 12 - 16 Ekim 2016, ss.1102-1109

Devolopment of surface response methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016, ss.2025-2030

Properties of Silicon Carbide Reinforced Nanocomposites Prepared by Flake Powder Metallurgy Processing

VAROL T., ÇANAKÇI A., YALÇIN E. D., ÖZKAYA S.

16th International Materials Symposium, 12 - 14 Ekim 2016, ss.1346-1352

Corrosion properties of Al2024/SiC composites compared with Al2024/B4C composites.

ERDEMİR F., ÇANAKÇI A., ÖZKAYA S., YALÇIN E. D.

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Türkiye, 5 - 07 Ekim 2016, sa.55, ss.23-26

Investigation of Properties of CNT Reinforced HA Biocomposites Produced by Mechanical Alloying Technique

ÇANAKÇI A., ÖZKAYA S., VAROL T., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.361

Corrosion Behavior of AlCuMg/B4C Nanocomposites Produced by Powder Metallurgy Method

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2846-2849

Functionally Graded Materials

VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.1643-1649

Study on Microstructure and Wear Properties of B4C Nanoparticle Reinforced ZA27 Nanocomposites

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., VAROL T.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2850-2853

THE EFFECT OF MILLING TIME ON MECHANICAL PROPERTIES OF ALCUMG-B4C NANOCOMPOSITES PRODUCED BY HIGH ENERGY MILLING

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Aralık 2015, ss.26-30

EFFECT OF MECHANICAL ALLOYING ON MECHANICAL PROPERTIES OF AlCuMg-B4C NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.186-192

THE MICROSTRUCTURE OF NANO B4C PARTICLE REINFORCED Al-Cu-Mg ALLOY MATRIX NANOMPOSITES PRODUCED BY FLAKE POWDER METALLURGY METHOD

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.585-590

EFFECT OF B4C CONTENT AND MILLING TIME ON WEAR BEHAVIOUR OF MECHANICALLY ALLOYED AlCuMg NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.173-179

WEAR BEHAVIOR OF AL2024/SIC COMPOSITES PRODUCED BY POWDER METALLURGY METHODS

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.11-15

THE EFFECT OF MILLING TIME AND PARTICLE SIZE ON THE FLAKE MORPHOLOGY AND FLAKE PARTICLE SIZE OF Al-Cu-Mg ALLOY POWDERS PREPARED VIA MECHANICAL MILLING

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.21-25

Artifical neural network approach for the prediction of coating thickness in Fe-Al caoatings fabricated by mechanical milling

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.

17th International Metallurgy and MaterialsCongress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.995-1003

Synthesis And Characterization Of B4c Particles Reinforced Al-Cu-Mg Alloy Matrix Nanocomposite Powders By High Energy Mechanical Milling

ÖZKAYA S., ÇANAKÇI A., VAROL T.

17th International Metallurgy and MaterialsCongress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.459-463

AA7075 Metal Matrisli %10 B4c Parçacık Takviyeli Kompozitlerin Mekanik Alaşımlama Yöntemiyle Üretimi Ve Özelliklerinin Geliştirilmesi

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A., VAROL T.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.317-321

Kitaplar

Advanced antibacterial effect of bioactive natural hydroxyapatite biocomposites

Özkaya S., Güler O.

Studies in Natural Products Chemistry, Atta-ur-Rahman, Editör, Elsevier Science, Oxford/Amsterdam , Amsterdam, ss.55-112, 2024

Metrikler

Yayın

107

Atıf (WoS)

488

H-İndeks (WoS)

Atıf (Scopus)

517

H-İndeks (Scopus)

Atıf (Scholar)

721

H-İndeks (Scholar)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Açık Erişim