Prof. Dr. ÖMER NECATİ CORA

Mahabunphachai S., Cora O. N., Koc M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.43, sa.23, ss.10822-10833, 2018 (SCI-Expanded)

Effects of friction models on the compaction behavior of copper powder

Guner F., CORA Ö. N., SOFUOĞLU H.

TRIBOLOGY INTERNATIONAL , cilt.122, ss.125-132, 2018 (SCI-Expanded)

Warm Hydromechanical Deep Drawing of AA 5754-0 and Optimization of Process Parameters

ACAR D., Turkoz M., GEDİKLİ H., Halkaci H. S., CORA Ö. N.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.140, sa.1, 2018 (SCI-Expanded)

Microindentation on the porous copper surface modulations

Ekmekci D., Yilmaz F., Kolemen U., CORA Ö. N.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING , cilt.123, sa.11, 2017 (SCI-Expanded)

Thermal conductivity of different colored compomers

GÜLER Ç., KELEŞ A., GÜLER M. S., KARAGÖZ Ş., CORA Ö. N., Keskin G.

JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS , cilt.15, sa.4, 2017 (SCI-Expanded)

Enhanced Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt-Spinning Technique

ÖZTÜRK S., İÇİN K., ÖZTÜRK B., TOPAL U., Odabasi H. K., GÖBÜLÜK M., et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.10, ss.5017-5030, 2017 (SCI-Expanded)

Effects of grain size on room temperature deformation behavior of Zn-22Al alloy under uniaxial and biaxial loading conditions

CETIN M. E., DEMIRTAS M., SOFUOĞLU H., CORA Ö. N., PÜRÇEK G.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.672, ss.78-87, 2016 (SCI-Expanded)

An investigation of contact interactions in powder compaction process through variable friction models

Guner F., SOFUOĞLU H., CORA Ö. N.

TRIBOLOGY INTERNATIONAL , cilt.96, ss.1-10, 2016 (SCI-Expanded)

Numerical modeling of cold powder compaction using multi particle and continuum media approaches

Guner F., CORA Ö. N., SOFUOĞLU H.

POWDER TECHNOLOGY , cilt.271, ss.238-247, 2015 (SCI-Expanded)

Effect of manufacturing process sequence on the corrosion resistance characteristics of coated metallic bipolar plates

Dur E., Cora O. N., Koç M.

JOURNAL OF POWER SOURCES , cilt.246, ss.788-799, 2014 (SCI-Expanded)

Investigation of the effects of process sequence on the contact resistance characteristics of coated metallic bipolar plates for polymer electrolyte membrane fuel cells

TURAN C., Cora O. N., KOÇ M.

JOURNAL OF POWER SOURCES , cilt.243, ss.925-934, 2013 (SCI-Expanded)

Contact resistance characteristics of coated metallic bipolar plates for PEM fuel cells - investigations on the effect of manufacturing

Turan C., Cora O. N., Koç M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.37, sa.23, ss.18187-18204, 2012 (SCI-Expanded)

Die wear in stamping of advanced high strength steels - Investigations on the effects of substrate material and hard-coatings

CORA Ö. N., Agcayazi A., Namiki K., SOFUOĞLU H., Koc M.

TRIBOLOGY INTERNATIONAL , cilt.52, ss.50-60, 2012 (SCI-Expanded)

Investigations on the variation of corrosion and contact resistance characteristics of metallic bipolar plates manufactured under long-run conditions

Peker M. F., CORA Ö. N., Koc M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.36, sa.23, ss.15427-15436, 2011 (SCI-Expanded)

Effect of manufacturing processes on contact resistance characteristics of metallic bipolar plates in PEM fuel cells

Turan C., Cora O. N., Koc M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.36, sa.19, ss.12370-12380, 2011 (SCI-Expanded)

Experimental investigations on the corrosion resistance characteristics of coated metallic bipolar plates for PEMFC

Dur E., Cora O. N., Koc M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.36, sa.12, ss.7162-7173, 2011 (SCI-Expanded)

Effect of manufacturing conditions on the corrosion resistance behavior of mettalic bipolar plates in proton exchange membrance fuel cells

Dur E., Cora O. N., Koc M.

JOURNAL OF POWER SOURCES , cilt.196, sa.3, ss.1235-1241, 2011 (SCI-Expanded)

An experimental study on the comparative assessment of hydraulic bulge test analysis methods

Koc M., Billur E., Cora O. N.

MATERIALS & DESIGN , cilt.32, sa.1, ss.272-281, 2011 (SCI-Expanded)

Effect of manufacturing processes on formability and surface topography of proton exchange membrane fuel cell metallic bipolar plates

JOURNAL OF POWER SOURCES , cilt.195, sa.16, ss.5269-5277, 2010 (SCI-Expanded)

Microscale-modulated porous coatings: fabrication and pool-boiling heat transfer performance

Cora O. N., Min D., Koc M., Kaviany M.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING , cilt.20, sa.3, 2010 (SCI-Expanded)

Experimental investigations on wear resistance characteristics of alternative die materials for stamping of advanced high-strength steels (AHSS)

Cora O. N., Koc M.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.49, ss.897-905, 2009 (SCI-Expanded)

Wear performance assessment of alternative stamping die materials utilizing a novel test system

Cora O. N., Namiki K., Koc M.

WEAR , cilt.267, ss.1123-1129, 2009 (SCI-Expanded)

2-D and 3-D modulated porous coatings for enhanced pool boiling

Min D. H., Hwang G. S., Usta Y., Cora O. N., Koc M., Kaviany M.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.52, ss.2607-2613, 2009 (SCI-Expanded)

Micro-manufacturing of micro-scale porous surface structures for enhanced heat transfer applications: an experimental process optimization study

Cora O. N., Usta Y., Koç M.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING , cilt.19, sa.4, 2009 (SCI-Expanded) Sürdürülebilir Kalkınma

Modelling of variable friction in cold forging

Cora O. N., Akkoek M., DARENDELİLER H.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , cilt.222, ss.899-908, 2008 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

DEVELOPING A MOTION MECHANISM FOR A SINGLE MODULE IN A SELF-RECONFIGURABLE MODULAR MICROROBOTICS SYSTEM BY USING EXTERNAL MAGNETIC ACTUATORS

Dokuyucu H. I., Özmen N., Cora Ö. N.

Uludağ University Journal of the Faculty of Engineering , cilt.27, sa.3, ss.1061-1080, 2022 (Hakemli Dergi)

Comparison of numerical analyses of a composite wing component subjected to 4-point bending

Bisagni C., Raimondo A., Atanasovska I., Milic M., Troian R., Frulla G., et al.

Composites Part C: Open Access , cilt.8, 2022 (ESCI) Sürdürülebilir Kalkınma

Solid particle erosion performance of micro-arc oxidation and electro spark deposition coated Ti6Al4V sheets

Acar D., Aktuğ S. L., Korkmaz K., Durdu S., Cora Ö. N.

The International Journal of Materials and Engineering Technology , cilt.5, sa.1, ss.28-32, 2022 (Hakemli Dergi)

Thermal expansion, porosity, and microhardness properties of solid oxide fuel cell metallic interconnects manufactured by powder metallurgy approach

Topcu A., Yalçın Ö. F., Öztürk B., Cora Ö. N.

Turkish Journal of Electromechanics and Energy , cilt.6, sa.3, ss.123-130, 2021 (Hakemli Dergi)

State of the art review on the Cu(In,Ga)Se2 thinfilm solar cells

OMID M. A., CORA Ö. N.

Turkish Journal of Electromechanics and Energy , cilt.5, sa.2, ss.74-82, 2020 (Hakemli Dergi)

Experimental and Numerical Investigation of Thickness Distribution in Forming of Superplastic Zn-22Al Alloy

ÇETİN M. E., DEMİRTAŞ M., PÜRÇEK G., CORA Ö. N., SOFUOĞLU H.

ACADEMIC PERSPECTIVE PROCEDIA , cilt.1, sa.1, ss.1034-1040, 2018 (Hakemli Dergi)

Ilık Hidromekanik Derin Çekme Prosesinde Optimum Şekillendirme Parametrelerinin Belirlenmesi

ACAR D., TÜRKÖZ M., DİLMEÇ M., HALKACI H. S., GEDİKLİ H., CORA Ö. N.

Ordu Üniversitesi Bilim ve Teknoloji Dergisi , cilt.6, sa.2, ss.38-47, 2016 (Hakemli Dergi)

MİKRO İMALAT YÖNTEMİYLE YÜZEY ŞEKİLLENDİRMENİN DENTAL İMPLANT UYGULAMALARINDAKİ OSSEOİNTEGRASYONA ETKİSİ

KÖSE S., CORA Ö. N., SOFUOĞLU H.

Süleyman Demirel Üniversitesi Mühendislik Bilimleri ve Tasarım Dergisi , cilt.2, sa.3, ss.221-227, 2014 (Hakemli Dergi)

Mikro İmalat Yöntemiyle Yüzey Şekillendirmenin Dental İmplant Uygulamalarındaki Osseointegrasyona Etkisi

Köse S., CORA Ö. N., SOFUOĞLU H.

Süleyman Demirel Üniversitesi Mühendislik Bilimleri ve Tasarım Dergisi , cilt.2, sa.3, ss.221-227, 2014 (Hakemli Dergi)

Parametric Investigation of Circular and Elliptical Bulge Test in Warm Hydroforming Process for AA5754-O

CORA Ö. N., GEDİKLİ H., KOÇ M.

Key Engineering Materials , cilt.473, ss.594-601, 2011 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Effect of Cold-Spraying as Post-Processing Surface Treatment on Ti6Al4V Additive Manufactured Parts

Kolcu D., Meriç D., Aksa H. C., Yanar H., Varol T., Gedikli H., et al.

5th International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 25 - 27 Eylül 2024, ss.986-993

Optimization of Friction Stir Welding Parameters for Joining of Ti-Al Laminated Metal Composite to AA 5754 Alloy

Acar D., Trdan ., Cora Ö. N., Klobčar D.

29th International Conference on Materials and Technology (29 ICM&T), Piran, Slovenya, 2 - 04 Ekim 2024, ss.29

İTKİ YÖNLENDİRME LÜLELERİNİN UÇAK PERFORMANSINA ETKİSİNİN İNCELENMESİ

Dursun S., Baltacı S., Demir S. H., Yiğit K., Cora Ö. N.

10. Ulusal Havacılık ve Uzay Konferansı, Ankara, Türkiye, 18 - 20 Eylül 2024, ss.1-17

Türk Edebiyatında Çay

Ulusal Çay Kongresi , Rize, Türkiye, 21 - 23 Mayıs 2024, ss.102

Numerical Modelling Examples to Different Engineering Problems

Training School on Computational Modelling and Advanced Design Approaches (COMADA), Belgrade, Sırbistan, 13 - 15 Mart 2024

Novel Sensor Applications in Aeronautics and Harsh Environments

COST Action CA18203: Optimising Design for Inspection, Workshop and Management Committee Meeting 7, Porto, Portekiz, 14 - 16 Şubat 2024

Mode-I Fracture Toughness Evaluation of a 20-ply Composite Panel

Abdullayev H., Cora Ö. N.

COST Action CA18203: Optimising Design for Inspection, Workshop and Management Committee Meeting 7, Porto, Portekiz, 14 - 16 Şubat 2024

Effect of Laser Surface Texturing on the Tribological Performance of Ultra High-Molecular Weight Polyethylene Materials

Çavrar T., Bičišťová R., Primus T., Hauschwitz ., Brajer J., Cora Ö. N.

5th International Conference of Materials and Engineering Technology (TICMET'23), Trabzon, Türkiye, 13 - 16 Kasım 2023, ss.431

Size Effect For Graphene: A Review

5th International Conference of Materials and Engineering Technology (TICMET'23), Trabzon, Türkiye, 13 - 16 Kasım 2023, ss.422

Solid Particle Erosion Performance of Drone Propeller Materials

Acar D., Meriç D., Gedikli H., Schulz A., Cora Ö. N.

The 5th International Conference of Materials and Engineering Technology, Trabzon, Türkiye, 13 - 15 Kasım 2023, ss.1

Novel Sensor Applications in Aeronautics and Harsh Environments

Training School on Inspection, Signal Processing, Identification and Analysis (INSIGNIA), COST Action CA18203 - Optimising Design for Inspection, Ohrid, Makedonya, 18 - 20 Eylül 2023

Mechanical Property Mapping for Dual Phase (DP) Steels

Setty M., Annasamy M., Cora Ö. N.

COST Action CA21121 MecaNano General Meeting 2023, Madrid, İspanya, 26 - 27 Nisan 2023, ss.1

An Overview on Aircraft Design and Aircraft Structure Optimisation

Training School on Optimisation, Design and INtegration, Rouen, Fransa, 12 - 14 Nisan 2023, ss.1-74

Mode-I Fracture Toughness Evaluation of a 20-ply Composite Panel

Cora Ö. N., Bekci M. L., Naaman M., Pullin R., Pearson M.

12th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons", Barcelona, İspanya, 18 - 21 Ekim 2022, ss.1

Friction Stir Welding of Ultrasonically Consolidated Laminated Metal Composites with Aluminum Sheets

Acar D., Klobčar D., Uroš T., Cora Ö. N.

European Conference on Composite Materials ECCM20, Lausanne, İsviçre, 26 - 30 Haziran 2022, ss.1

Hydrogen Transportation Options and Challenges

Omıd M. A., Koç M., Cora Ö. N.

23rd World Hydrogen Energy Conference (WHEC 2022), İstanbul, Türkiye, 26 - 30 Haziran 2022, ss.1 Sürdürülebilir Kalkınma

Investigations on the Micro-Scale Surface Interactions and Tribological Size Effect in MicroStamping of SS316L Sheet

Peker M. F., Gedikli H., Cora Ö. N., Koç M.

23rd World Hydrogen Energy Conference (WHEC 2022), İstanbul, Türkiye, 26 - 30 Haziran 2022, ss.1 Sürdürülebilir Kalkınma

Surface Topography Evaluation During Long-Run Micro-Stamping of BPPs and Its Effect on Corrosion and Contact Resistance Characteristics

Peker M. F., Gedikli H., Cora Ö. N., Koç M.

23rd World Hydrogen Energy Conference (WHEC 2022), İstanbul, Türkiye, 26 - 30 Haziran 2022, ss.1 Sürdürülebilir Kalkınma

APPLICATIONS OF AUXETIC MATERIALS

Çetin T., Cora Ö. N.

The International Conference of Young Scientists on Energy and Natural Sciences Issues (CYSENI 2022), Kaunas, Litvanya, 24 - 27 Mayıs 2022, ss.455-458 Sürdürülebilir Kalkınma

CHALLENGES AND EXPECTATIONS FOR BATTERY MANAGEMENT SYSTEMS IN ELECTRIC VEHICLES: A REVIEW

Cora Ö. N., Farooq A.

The International Conference of Young Scientists on Energy and Natural Sciences Issues (CYSENI 2022) , Kaunas, Litvanya, 24 - 27 Mayıs 2022, ss.155-159 Sürdürülebilir Kalkınma

Effect of Surface Texturing on Tribological Behavior of SAE 600 Bearing Bronze

Acar D., Tan H. O., Cora Ö. N.

The International Conference of Materials and Engineering Technology, Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.1

Investigation on the Solid Particle Erosion of Some Glass and Polymeric Transparent Materials

Danesh M. H., Acar D., Cora Ö. N.

The International Conference of Materials and Engineering Technology, Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.1

Yapı Dinamiği Özelliklerini Koruyan Küçültülmüş Modellerin Hazırlanması

KAYA Y., ACAR B., CORA Ö. N., ÖZKESİCİLER M.

Sanayi Odaklı Lisans Bitirme Projeleri Programı 2020 - 2021 Projeleri Bildiri Kitabı, Ankara, Türkiye, 12 Ekim 2021, ss.510-514

Performance Comparison of Machined from Bulk and Fabricated via Powder Metallurgy Approach Crofer®22 APU Interconnects for SOFC Applications

TOPCU A., ÖZTÜRK B., CORA Ö. N.

12th INTERNATIONAL EXERGY, ENERGY AND ENVIRONMENT SYMPOSIUM (IEEES-12), DOHA, Qatar, 20 - 24 Aralık 2020, ss.220-223

Fuel Cell Electric Vehicles: Current Prospects and Challenges Beyond 2020

CORA Ö. N.

12th INTERNATIONAL EXERGY, ENERGY AND ENVIRONMENT SYMPOSIUM (IEEES-12), DOHA, Qatar, 20 Aralık 2020 Sürdürülebilir Kalkınma

Erosive Wear Performance of Ti6Al4V Coated with Micro Arc Oxidation and Electro Spark Deposition

Acar D., Aktuğ S. L., Korkmaz K., Durdu S., Cora Ö. N.

The International Conference of Materials and Engineering Technology (TICMET’20), Gaziantep, Türkiye, 5 - 07 Kasım 2020, ss.328-335

The Status Quo and Challenges for Li-Ion Battery Technology

Farooq A., CORA Ö. N.

The International Conference of Materials and Engineering Technology (TICMET'20), Gaziantep, Türkiye, 05 Kasım 2020 Sürdürülebilir Kalkınma

Acquisition of Residual Stress and Fracture Toughness of Metals Through Nanoindentation

CORA Ö. N., EKMEKCİ D.

A Nanomechanical Testing Conferenceand Bruker User Meeting, 4 - 06 Şubat 2020

Ballistic Performance of Ultra-High Strength Armor Steels Under Different Conditions

ACAR D., CANPOLAT B. H., USTA E., CORA Ö. N.

The International Conference of Materials and Engineering Technology, TICMET 19, Gaziantep, Türkiye, 10 - 12 Ekim 2019, ss.10

Effect of Surface Texturing on Tribological Behaviour

International Conference on Agriculture Technology, Engineering and Sciences, ICATES 2019, Lviv, Ukrayna, 18 - 20 Eylül 2019, ss.1-20

Surface Texture Application on UHMWE for Medical Applications

International Conference on Agriculture Technology, Engineering and Sciences, ICATES 2019, Lviv, Ukrayna, 18 - 20 Eylül 2019, ss.1-20

Investigation on Formability of Varied Aluminum Alloys Through Warm Closed-die Hydroforming

International Conference on Agriculture Technology, Engineering and Sciences, ICATES 2019, Lviv, Ukrayna, 18 - 20 Eylül 2019, ss.1-20

Experimantal and numerical investigation of thickness distribution in forming of superplastic Zn-22Al alloy

ÇETİN M. E., DEMİRTAŞ M., PÜRÇEK G., CORA Ö. N., SOFUOĞLU H.

6th international semposium on innovative technologies in engineering and science, 9 - 11 Kasım 2018

Experimental and Numerical Investigation of Thickness Distribution in Forming of Superplastic Zn-22Al Alloy

ÇETİN M. E., DEMİRTAŞ M., PÜRÇEK G., CORA Ö. N., SOFUOĞLU H.

6th International Symposium on Innovative Technologies in Engineering and Science (ISITES2018), Antalya, Türkiye, 9 - 11 Kasım 2018, ss.1034-1040

Ultrasonik Eklemeli İmalat Yönteminin Gömülü Sistem Üretimine Yönelik Uygulamaları

CORA Ö. N., KAYA İ.

ASELSAN 3. MALZEME TEKNOLOJİLERİ ÇALIŞTAYI, Ankara, Türkiye, 10 - 11 Mayıs 2018, ss.1-30

DETERMINATION OF OPTIMUM FLOW FIELD FOR SOLID OXIDE FUEL CELL (SOFC) INTERCONNECTS UNDER SPECIFIED CONDITIONS

Topcu A., ÖZTÜRK B., Cora Ö. N.

16th International Conference on Clean Energy (ICCE-2018), Famagusta, Kıbrıs (Kktc), 9 - 11 Mayıs 2018, ss.1-6

Solid Particle Erosion Performance Evaluation of Ti-6Al-4V as Erosion Shield Material of a Helicopter Rotor Blade

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.1-2

Formability Enhancement of AA5754-O Aluminium Alloy via Double-sided Hydroforming

ÇETİN M. E., CORA Ö. N., SOFUOĞLU H.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.107-108

Zn-22Al Alaşımının Mikro Derin Çekilebilirliğine Zımba Hızının Etkisinin İncelenmesi

1 st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.465-466

Solid Particle Erosion Performance of Ti-6Al-4V as Erosion Shield Material

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.109-110

Experimental and Numerical Investigations on the Upsetting of AA6082-T6 Alloy at Room Temperature

TOPCU A., CORA Ö. N.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.377

Wear resistance evaluation of hard-coatings for sheet blanking die

17th International Conference on Metal Forming, METAL FORMING 2018, Toyohashi, Japonya, 16 - 19 Eylül 2018, cilt.15, ss.590-596

Effect of Grain Size on Microhardness of Superplastic Zn-22Al

ÇETİN M. E., DEMİRTAŞ M., SOFUOĞLU H., CORA Ö. N., PÜRÇEK G.

International Conference on Engineering Technologies, 7 - 09 Aralık 2017

EFFECT OF GRAIN SIZE ON MICROHARDNESS OF SUPERPLASTIC ZN22AL ALLOY

ÇETİN M. E., DEMİRTAŞ M., SOFUOĞLU H., CORA Ö. N., PÜRÇEK G.

International Conference on Engineering Technologies (ICENTE’17), Konya, Türkiye, 07 Aralık 2017 - 09 Ocak 2018, ss.65

İleri Yüksek Mukavemetli DP800 Çeliğinin Mekanik Özelliklerinde Girinim Yükleme Tiplerinin Etkisi

EKMEKCİ D., CORA Ö. N.

International Conference on Multidisciplinary, Engineering, Science, Education and Technology (IMESET’17 Bitlis), Bitlis, Türkiye, 27 - 29 Ekim 2017, ss.372

Experimental investigations on particle erosion behavior of AA 6061 alloy

ACAR D., MERİÇ D., BUDUR A. İ., GÜMRÜK R., SOFUOĞLU H., GEDİKLİ H., et al.

9th Anakara International Aeropace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017, ss.1-10

AA 6013 Alaşımının Halka Basma Testi ve Sonlu Elemanlar Analizi

ÇAM S., SOFUOĞLU H., CORA Ö. N.

20. ULUSAL MEKANİK KONGRESİ, Bursa, Türkiye, 5 - 09 Eylül 2017, ss.427-435

Effect of Surface Texturing on Tribological Performance of Ultra-High Molecular Weight Polyurethene

3rd International Conference on Engineering and Natural Sciences, ICENS, Budapeşte, Macaristan, 3 - 05 Mayıs 2017

Bonding Strength and Fuel Leakage Tests for Crofer®22 APU Solid Oxide Fuel Cell Interconnects

International Hydrogen Technologies Congress (IHTEC2017, 15 - 18 Mart 2017

Nanoindentation response of dual phase steels

CORA Ö. N.

Nanobrücken 2017: European Nanomechanical Testing Conference and Hysitron User Meeting, Manchester, Birleşik Krallık, 4 - 06 Nisan 2017, ss.24

Bonding Strength and Fuel Leakage Tests for Crofer®22 Solid Oxide Fuel Cell Metallic Interconnects”,, ADANA, TÜRKIYE, 15-18 Mart 2017, pp.287-293

Second International Hydrogen Technologies Congress, Adana, Türkiye, 15 - 18 Mart 2017, ss.287-293

Hydroformability of Advanced High Strength Steels Through FEA

3rd International Iron and Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, ss.74-78

Bonding Strength and Fuel Leakage Tests for Crofer®22 Solid Oxide Fuel Cell Metallic Interconnects

Second International Hydrogen Technologies Congress, Adana, Türkiye, 15 - 18 Mart 2017, ss.287-293

Helikopter Pali Aşınma Kalkanında Meydana Gelen Katı Parçacık Erozyonunun İncelenmesi İçin Bir Test Düzeneği Tasarım ve İmalatı

Acar D., Meriç D., Sofuoğlu H., Gümrük R., Cora Ö. N., Gedikli H.

VI. ULUSAL HAVACILIK VE UZAY KONFERANSI, Kocaeli, Türkiye, 28 - 30 Ekim 2016 Sürdürülebilir Kalkınma

Energy Generation Based on Salinity Gradient: Current Trends and Projections

CORA Ö. N., ACAR D.

3rd International Conference on Computational and Experimental Science and Engineering (ICCESEN 2016), Antalya, Türkiye, 19 - 24 Ekim 2016, ss.250

Sustainable Aviation and Projections for Aviation Industry

CORA Ö. N., GÜLER M. S.

3rd International Conference on Computational and Experimental Science and Engineering (ICCESEN 2016), Antalya, Türkiye, 19 - 24 Ekim 2016, ss.704 Sürdürülebilir Kalkınma

NANOINDENTATION ON CU POWDER AND ITS FINITE ELEMENT MODELING

EKMEKCİ D., KÖLEMEN U., YILMAZ F., CORA Ö. N.

16th International Materials Symposium (IMSP’2016), Denizli, Türkiye, 12 - 14 Ekim 2016, ss.1

EFFECT OF INDENTATION FORCE ON THE MECHANICAL PROPERTIES OF ADVANCED HIGH STRENGTH STEELS

EKMEKCİ D., CORA Ö. N.

16th International Materials Symposium (IMSP’2016), Denizli, Türkiye, 12 - 14 Ekim 2016, ss.624-631

Helikopter Palinin Aşınma Kalkanında Meydana Gelen Katı Parçacık Erozyonunun İncelenmesi İçin Bir Test Düzeneği ve Tasarımı

ACAR D., MERİÇ D., SOFUOĞLU H., GÜMRÜK R., CORA Ö. N., GEDİKLİ H.

Ulusal Havacılık ve Uzay Kongresi 2016, Kocaeli, Türkiye, 28 - 30 Eylül 2016, ss.1082-1094 Sürdürülebilir Kalkınma

Helikopter Palinin Aşınma Kalkanında Meydana Gelen Katı Parçacık Erozyonunun İncelenmesi İçin Bir Test Düzeneği Tasarımı ve İmalatı

ACAR D., MERİÇ D., SOFUOĞLU H., GÜMRÜK R., CORA Ö. N., GEDİKLİ H.

VI. Ulusal Havacılık ve Uzay Kongresi 2016, Kocaeli, Türkiye, 28 - 30 Eylül 2016, ss.1082-1094 Sürdürülebilir Kalkınma

AA 5754-O Alaşımının Hidroşekillendirilmesinde Etkin Parametrelerin Optimizasyonu

MERCAN H., ALTUNKAYA Ö., CORA Ö. N.

8. OTOMOTİV TEKNOLOJİLERİ KONGRESİ, Bursa, Türkiye, 23 - 24 Mayıs 2016, cilt.1, sa.1, ss.153-158

TOZ METALURJİSİ ÜRETİM PARAMETRELERİNİN İNTERKONNEKTÖR PLAKALARIN FİZİKSEL ÖZELLİKLERİNE ETKİSİ

ÖZTÜRK B., CORA Ö. N., ÖZTÜRK S., BAKAL A., TOPCU A.

International Conference on Material Science and Technology, 06 Nisan 2016

EFFECT OF PRODUCTION PARAMETERS ON PHYSICAL PROPERTIES OF THE INTERCONNECT PLATES PRODUCED BY POWDER METALLURGY

ÖZTÜRK B., CORA Ö. N., ÖZTÜRK S., BAKAL A., TOPCU A.

International Conference on Material Science and Technology in Cappadocia (IMSTEC 2016), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.832-837

MATERIAL CHARACTERIZATION OF ULTRASONICALLY CONSOLIDATED LAMINATED TI-AL COMPOSITES (UC-LMC)

KAYA İ., CORA Ö. N., Koc M.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015 Sürdürülebilir Kalkınma

Numerical Investigation of Coefficient of Friction in Copper Powder Compaction Process at Micro Scale

GÜNER F., SOFUOĞLU H., CORA Ö. N.

7th International Conference on Mechanical and Aerospace Engineering (ICMAE), London, Kanada, 18 - 20 Temmuz 2016, ss.127-131

STAMPING DIE WEAR INVESTIGATION WITH DIFFERENT HARD-COATINGS

CORA Ö. N., Ağcayazi A., KOÇ M.

1st International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.1-6

Recent Trends in Energy Generation Based on Salinity Gradient: Pressure Retarded Osmosis

1st International Conference on Green Chemistry and Sustainable Technologies 2015, İzmir, Türkiye, 30 Eylül - 03 Ekim 2015, ss.59

INVESTIGATION OF THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF Ti-6Al-XNbALLOYS

Öztürk B., Gölbaşı Z., Cora Ö. N., ÖZTÜRK S.

International Porous and Powder Materials Symposium and Exhibition PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.323-328

Süperplastik Zn-22Al Alaşımında Ultra İnce Tane Oluşumunun Oda Sıcaklığındaki Şekillendirilebilirliğe Etkisinin Deneysel ve Teorik Olarak İncelenmesi

ÇETİN M. E., DEMİRTAŞ M., SOFUOĞLU H., CORA Ö. N., PÜRÇEK G.

19. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015, ss.3

Ilık Hidromekanik Derin Çekme Prosesinin Sonlu elemanlar Analizi ve Parametrik Optimizasyonu

ACAR D., TÜRKÖZ M., GEDİKLİ H., CORA Ö. N., HALKACI H. S.

19. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015, ss.1-4

AA 5754 O Alaşımının Ilık Hidroşekillendirilmesinde Etkin Olan Parametrelerin Optimizasyonu

ÇETİN M. E., CORA Ö. N., SOFUOĞLU H.

BIAS Mühendislik Kullanıcı Konferansı 2015, İstanbul, Türkiye, 12 - 13 Mayıs 2015

Material characterization of ultrasonically consolidated laminated Ti-Al composites (UC-LMC)

Kaya I., CORA Ö. N., KOÇ M.

ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015

Mikro İmalat Yöntemiyle Yüzey Şekilendirmenin Dental İmplant Uygulamalarındaki Osseointegrasyona Etkisi

KÖSE S., CORA Ö. N., SOFUOĞLU H.

VII. Ulusal Biyomekanik Kongresi, Isparta, Türkiye, 16 - 18 Ekim 2014, ss.221-227

Mikro İmalat Yöntemiyle Yüzey Şekilendirmenin Dental İmplant Uygulamalarındaki Oseointegrasyona Etkisi

KÖSE S., CORA Ö. N., SOFUOĞLU H.

VII. Ulusal Biyomekanik Kongresi, Isparta, Türkiye, 16 - 18 Ekim 2014, ss.221-227

Mikro Derin Çekme İşleminde Numune Boyut Etkisinin Sonlu Elemanlar Yöntemiyle İncelenmesi

18. Ulusal Mekanik Kongresi, Manisa, Türkiye, 26 - 30 Ağustos 2014, ss.176-185

Promises and Problems of Ultra Advanced High Strength Steel U AHSS Utilization in Auto Industry

7. Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 26 - 27 Mayıs 2014, ss.1-8

Metal Tozu Presleme Prosesinde Malzeme Modeli ve Sürtünme Etkisinin Sonlu Elemanlar Yöntemi ile Analizi

Güner F., CORA Ö. N., SOFUOĞLU H.

Seventh International Powder Metalurgy Conference and Exhibiton, Ankara, Türkiye, 26 - 28 Haziran 2014, ss.1-10

Nikel Tozu ile Üretilen Mikroyapılı Yüzeylerde Üretim Parametrelerinin Gözeneklilik ve Mikrosertliğe Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Türkiye, 24 Haziran 2014 - 28 Haziran 2015, ss.78-79

Nikel Tozu ile Üretilen Mikroyapılı Yüzeylerde Üretim Parametrelerinin Gözeneklilik ve Mikrosertliğe Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Türkiye, 24 Haziran 2014 - 28 Haziran 2015, ss.78-79

Nikel Tozu ile Üretilen Mikroyapılı Yüzeylerde Üretim Parametrelerinin Gözeneklilik ve Mikrosertliğe Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Türkiye, 24 Haziran 2014 - 28 Haziran 2015, ss.78-79

Toz Metalurjisi Yöntemi ile Üretilen İnterkonnektör Plakaların Üretim Parametrelerinin Gözeneklilik ve Isıl Genleşme Katsayılarına Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.80-81

PROMISES AND PROBLEMS OF ULTRA/ADVANCED HIGH STRENGTH STEEL (U/AHSS) UTILIZATION IN AUTOMOTIVE INDUSTRY

7th Automotive Technologies Congress, Bursa, Türkiye, 26 - 27 Mayıs 2014, ss.1-8 Sürdürülebilir Kalkınma

Finite element analysis and experimental validation of warm hydromechanical deep drawing process

Acar D., Turkoz M., Gedikli H., Cora Ö. N.

2014 5th International Conference on Information Technology for Manufacturing Systems, ITMS 2014, Singapore, Singapur, 16 - 17 Eylül 2014, cilt.686, ss.535-539

INVESTIGATIONS ON THE EFFECT OF COATING MATERIAL AND METHOD ON DIE WEAR IN STAMPING OF ADVANCED HIGH STRENGTH STEELS

CORA Ö. N., Koc M., Blau P. J., Namiki K.

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013

Effect of Coating Type on Wear Performance of AHSS Forming Dies Using a Cylinder on Flat Wear Test Method

CORA Ö. N., NAMIKI K., KOÇ M., BLAU P. J.

Materials Science & Technology- MS&T 2013, Montreal, Kanada, 27 - 31 Ekim 2013

Effect of Coating Type on Wear Performance of AHSS Forming Dies Using a Cylinder-on-flat Wear Test Methods

CORA Ö. N., Namiki K., KOÇ M., Blau P. J.

Materials Science & Technology- MS&T 2013, Montreal, Kanada, 27 - 31 Ekim 2013, ss.1

Discrete Element Modeling of Spherical Copper Powder Compaction Process

Güner F., CORA Ö. N., SOFUOĞLU H.

International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.1-10

Soğuk Toz Presleme Prosesinin Ayrık Sonlu Eleman Analizi

Güner F., CORA Ö. N., SOFUOĞLU H.

MSC Software Türkiye konferansı, İstanbul, Türkiye, 27 - 28 Mayıs 2013, ss.1-10

Investigations on the effect of coating material and method on die wear in stamping of advanced high strength steels

CORA Ö. N., KOÇ M., Blau P. J., Namiki K.

ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013, San Diego, CA, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013

SURFACE TOPOGRAPHY EVOLUTION DURING LONG-RUN MICRO-STAMPING OF BIPOLAR PLATES (BPPS) AND EFFECTS ON CORROSION AND CONTACT RESISTANCE CHARACTERISTICS

PEKER M. F., Cora O. N., Koc M.

ASME International Mechanical Engineering Congress and Exposition, Texas, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, ss.3035-3039

Surface topography evolution during long-run micro-stamping of bipolar plates (BPPs) and effects on corrosion and contact resistance characteristics

Peker M., Cora Ö., KOÇ M.

ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.7, ss.3035-3039

On the Manufacturing of Porous Micro-scale Structure Arrays on Large Surface Areas

CORA Ö. N., Mahabunphachai S., Koç M.

Multi-Material Micro Manufacture 4M-2012 Conference, Vienna, Avusturya, 9 - 11 Ekim 2012, ss.320-323

International Conference on Plasticity and Its Current Applications

CORA Ö. N., KOÇ M., TURAN C., DUR E.

Renewable Energy Research Conference – Technoport 201, Trondheim, Norveç, 16 - 18 Nisan 2012

On the Corrosion and Contact Resistance Characteristics of micro-stamped bipolar plates

CORA Ö. N., Koç M., TURAN C., PEKER M. F., DUR E.

Renewable Energy Research Conference – Technoport 2012, Trondheim, Norveç, 16 - 18 Nisan 2012, ss.1-38

DP780 Çelik Sacların Mekanik Özelliklerinin Hidro-şişirme Yöntemiyle İncelenmesi

CORA Ö. N., KARALI M., Koç M.

International Iron and Steel Symposium 2012, Karabük, Türkiye, 2 - 04 Nisan 2012, ss.1316-1323

Experimental Investigations into the Deformation Behavior of Thixo-Molded Mg AZ61L Sheet Alloy

CORA Ö. N., Koç M., Snell R., Decker R., Huang J.

TMS 2012 Annual Meeting & Exhibition, Orlando, Fl, Amerika Birleşik Devletleri, 11 - 15 Mart 2012, ss.413-418

Micro-manufacturing of 3-D porous surfaces-investigation on porosity and microhardness

CORA Ö. N., ÖZTÜRK B., KOÇ M.

7th International Conference on MicroManufacturing ICOMM 2012, Evanston, Il, Amerika Birleşik Devletleri, 11 - 14 Mart 2012, ss.520-525

Numerical Modeling of Indentation Tests to Determination of Mechanical Properties of Friction Stir Welded AA2024-T3 Sheet Alloys

CORA Ö. N., Burford D., GEDİKLİ H., KOÇ M.

International Conference on Plasticity and Its Current Applications, San Juan, Porto Riko, 3 - 08 Ocak 2012, ss.1

EXPERIMENTAL INVESTIGATIONS INTO THE DEFORMATION BEHAVIOR OF THIXOMOLDED Mg AZ61L SHEET ALLOY

Koc M., CORA Ö. N., Snell R., Decker R., Huang J.

Symposium on Magnesium Technology held during TMS Annual Meeting and Exhibition, Florida, Amerika Birleşik Devletleri, 11 - 15 Mart 2012, ss.413-418

Determination of Mechanical Properties of Friction Stir Welded Alloys Through Uniaxial and Indentation Tests

GEDİKLİ H., CORA Ö. N., Koc M.

Materials Science and Technology Conference and Exhibition MS&T 2011, Columbus, Oh, Amerika Birleşik Devletleri, 16 - 20 Ekim 2011, ss.1

Investigations of Micro-Scale Surface Interactions and Tribological Size Effect in Micro-stamping of SS 316L Sheets

CORA Ö. N., Koc M., PEKER M. F.

Materials Science and Technology Conference and Exhibition MS&T 2011, Columbus, Oh, Amerika Birleşik Devletleri, 16 - 20 Ekim 2011, ss.1

Performance Evaluation of Stamping Die Coatings via Ring-on-Flat Type Wear Tester

CORA Ö. N., Ağcayazi A., Koç M., Adamski D. J., Hall J.

Materials Science & Technology 2011 Conference & Exhibition, Columbus,Oh, Amerika Birleşik Devletleri, 16 - 20 Ekim 2011, ss.1

Investigation on Bulge Forming of Friction Stir Welded Aluminum 7075-O at Elevated Temperatures

KARALI M., CORA Ö. N., Nguyen V., Burford D., Koç M.

Materials Science and Technology Conference and Exhibition MS&T 2011, Columbus, Oh, Amerika Birleşik Devletleri, 16 - 20 Ekim 2011, ss.1

Mikro yapıda üç boyutlu yüzeylerin porozite ve mikrosertliğine üretim parametrelerinin etkisi

ÖZTÜRK B., CORA Ö. N., KOÇ M.

6. Uluslararası Toz Metalurjisi Konferansı ve Sergisi, Ankara, Türkiye, 5 - 09 Ekim 2011

Manufacturing of Micro-scale 3-D Porous Gradient Surfaces

ÖZTÜRK B., CORA Ö. N., KOÇ M.

The 6th International Conference on MicroManufacturing (ICOMM 2011), Tokyo, Japonya, 7 - 10 Mart 2011, ss.181-186

Finite Element Analysis for Warm Hydroforming of Aluminum Alloys

GEDİKLİ H., CORA Ö. N., Koç M.

17th International Symposium on Plasticity and Its Current Applications, Puerto Vallerta, Meksika, 3 - 08 Ocak 2011

Micro-stamping of PEMFC Bipolar Plates-investigations on the Effect Coating and Surface Quality Interactions on the Corrosion Resistance Characteristics of Micro-channeled Metallic Surface Areas

Peker M. F., Cora O. N., Koc M.

8th International Conference on Multi-Material Micro Manufacture (4M 2011), Stuttgart, Almanya, 8 - 10 Kasım 2011, ss.145-148

Corrosion, contact resistance, and surface characteristics of stamped and hydroformed metallic bipolar plates for PEMFC

Turan C., DUR E., PEKER M. F., Cora Ö. N., Koç M.

ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2010, Brooklyn, NY, Amerika Birleşik Devletleri, 14 - 16 Haziran 2010, cilt.2, ss.545-553 Sürdürülebilir Kalkınma

Investigations on the Impact of Manufacturing Process on PEM Fuel Cell Bipolar Plate Corrosion and Contact Resistance Behavior

DUR E., TURAN C., CORA Ö. N., Koç M.

International Forum on Micro Manufacturing 2010, Gifu, Japonya, 20 - 23 Ekim 2010

Mechanical Behavior of UAM-Fabricated Al-Ti LMC Blanks

KAYA I., CORA Ö. N., Koç M., Fitzgerald C., Sheridan J., Schwope L. A.

2nd Ultrasonic Additive Manufacturing Technology Symposium, Columbus, Oh, Amerika Birleşik Devletleri, 20 - 21 Ekim 2010

Investigations on Die Life and Tribological Issues in Micro-stamping of Metallic Bipolar Plates for Fuel Cells

Peker M. F., CORA Ö. N., Koç M.

International Forum on Micro Manufacturing 2010, Gifu, Japonya, 20 - 23 Ekim 2010

Material Characterization of Ultrasonically Consolidated Laminated Ti-Al Composites (UC-LMC)

KAYA I., CORA Ö. N., Koc M., Sheridan J., Fitzgerald C., Wessel D.

MS&T Materials Science and Technology 2010 Conference and Exhibition - MS&T 2010, Houston,Tx, Amerika Birleşik Devletleri, 17 - 21 Ekim 2010

Investigations on the Formability and Surface Topography of Micro-Channel Arrays on Large Area Plates – PEMFC Metallic Bipolar Plates

5th International Conference on MicroManufacturing, ICOMM 2010, Madison, Wı, Amerika Birleşik Devletleri, 5 - 09 Nisan 2010

Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS)

Cora Ö. N., Koç M.

ASME International Manufacturing Science and Engineering Conference, MSEC2008, Evanston, IL, Amerika Birleşik Devletleri, 7 - 10 Ekim 2008, cilt.2, ss.185-192

Investigation of stainless steel powder compaction process for manufacturing of micro-porous surface feature

PAREKH G., CORA Ö. N., KOÇ M.

International Conferences on Multi-Material Micro Manufacture, 4M/International Conferences on Micro Manufacturing, ICOMM 2009, Karlsruhe, Almanya, 23 - 25 Eylül 2009, cilt.2009, ss.119-122

Influence of substrate material on wear performance of stamping dies utilizing a new die wear test system

CORA Ö. N., Koc M., KOÇ M.

37th Annual North American Manufacturing Research Conference, NAMRC 37, Greenville, Sc, Amerika Birleşik Devletleri, 19 - 22 Mayıs 2009, cilt.37, ss.325-331

Effect of substrate hardness on wear performance of alternative die materials for stamping of advanced high strength steels