Dr. Öğr. Üyesi ONUR GÜLER

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of microstructural, hardness, and wear properties of AlCrCuFeNi high entropy alloys produced by hot-pressing with the enhancement of manufacturability through electroless Ag incorporation

ÇELEBİ M., GÜLER O., KARABACAK A. H., ÇANAKÇI A., AKÇAY S. B., KOCAMAN M., et al.

Tribology International , cilt.201, 2025 (SCI-Expanded)

Effect of AlCrCuFeNi high entropy alloy reinforcements with and without B4C on powder characteristic, mechanical and wear properties of AA5083 metal-metal composites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., TUNÇ S. A., GÜLER O., ÇELEBİ M.

Journal of Alloys and Compounds , cilt.1008, 2024 (SCI-Expanded)

Sustainable polyurethane biocomposite foams by improved microstructure, acoustic characteristics, thermoregulation performance and reduced CO2 emission through phase change material integration

Gencel O., Aydoğmuş E., GÜLER O., Ustaoğlu A., SARI A., HEKİMOĞLU G., et al.

Journal of Energy Storage , cilt.103, 2024 (SCI-Expanded)

Effect of expandable graphite content on the physical, thermal and mechanical properties of novolac matrix composites: Halogen-free flame-retardant polymer composites

KOCAMAN M., AKÇAY S. B., GÜLER O., ÇUVALCI H., VAROL T.

Diamond and Related Materials , cilt.150, 2024 (SCI-Expanded)

Enhancing mechanical properties and tribological performance through boron carbide hybridization in Novolac matrix graphite composites under dry sliding condition

KOCAMAN M., AKÇAY S. B., GÜLER O., ÇUVALCI H., VAROL T.

Tribology International , cilt.199, 2024 (SCI-Expanded)

Biocomposite foams consisting of microencapsulated phase change materials for enhanced climatic regulation with reduced carbon dioxide emissions in buildings

Gencel O., Aydoğmuş E., Güler O., Ustaoğlu A., Sarı A., Hekimoğlu G., et al.

Construction and Building Materials , cilt.448, 2024 (SCI-Expanded)

Comparative analysis of wear properties between electroless Ni-B coating and commercial ZnAl coating on 38Si7 steel used in railway system

DURSUNLAR M., TAŞ Z., Akgül B., GÜLER O., ÇELEBİ M.

Engineering Science and Technology, an International Journal , cilt.58, 2024 (SCI-Expanded)

Synthesize and characterization of silver coated Ti powders from waste titanium chips by mechanical milling assisted electroless plating method

AKÇAY S. B., VAROL T., GÜLER O., ALVER Ü.

Materials Chemistry and Physics , cilt.323, 2024 (SCI-Expanded)

Determination of selective laser melting process parameters of tungsten carbide powders coated with nickel via electroless plating for improved interface properties

Ergüder T. O., GÜLER O., Yıldız F.

International Journal of Refractory Metals and Hard Materials , cilt.122, 2024 (SCI-Expanded)

Effect of the Ag coated ABS granules and hot-pressing temperature on the microstructure evolution and properties of novel Ag/ABS composites

Akçay S. B., Kocaman M., Güler O., Ömür F. D., Varol T., Aslan M., et al.

Surfaces and Interfaces , cilt.51, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

Optimization of Dry Sliding Wear in Hot-Pressed Al/B<sub>4</sub>C Metal Matrix Composites Using Taguchi Method and ANN

Gajević S., Miladinović S., GÜLER O., ÖZKAYA S., Stojanović B.

MATERIALS , cilt.17, sa.16, 2024 (SCI-Expanded)

Production and assessment of UV-cured resin coated stearyl alcohol/expanded graphite as novel shape-stable composite phase change material for thermal energy storage

GÜLER O., Er Y., HEKİMOĞLU G., Ustaoglu A., SARI A., Subaşı S., et al.

Applied Thermal Engineering , cilt.247, 2024 (SCI-Expanded)

Fabrication of mechanical durable novolac matrix composites with recycled and cost-effective candle-soot nano particles

Kocaman M., Güler O., Çuvalcı H., Akçay S. B.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , 2024 (SCI-Expanded)

Enhancing sustainability with waste hemp-shive and phase change material: Novel gypsum-based composites with advanced thermal energy storage properties

Gencel O., GÜLER O., Ustaoğlu A., Erdoğmuş E., SARI A., HEKİMOĞLU G., et al.

Journal of Cleaner Production , cilt.451, 2024 (SCI-Expanded)

Pre-hardening water quenching effect on the wear resistance of TiCN coated 4140 steels

YALÇIN E. D., GÜLER O., KARABACAK A. H., ÇANAKÇI A., VAROL T., KOCAMAN M., et al.

SURFACE & COATINGS TECHNOLOGY , cilt.480, 2024 (SCI-Expanded)

Novel integration of recycled-hemihydrate phosphogypsum and ethyl palmitate in composite phase change material for building thermal regulation

Kocyiğit Ş., GÜLER O., HEKİMOĞLU G., Ustaoğlu A., Erdoğmuş E., SARI A., et al.

Journal of Cleaner Production , cilt.445, 2024 (SCI-Expanded)

Surface modification for improving interfacial, mechanical and thermal performance characteristics in epoxy composites: Electroless nickel enhancement of dendritic copper particle-reinforced epoxy

Akçay S. B., Kocaman M., Çelebi M., Güler O., Varol T.

Surface and Coatings Technology , cilt.478, 2024 (SCI-Expanded)

Characterisation and energy storage performance of 3D printed-photocurable resin/microencapsulated phase change material composite

Er Y., GÜLER O., Ustaoğlu A., HEKİMOĞLU G., SARI A., Subaşı S., et al.

Thermal Science and Engineering Progress , cilt.48, 2024 (SCI-Expanded)

Evolution of Morphology, Particle Size and Oxidation Resistance of Recycled Ti-6Al-4V Powders Prepared by Planetary Ball Milling

VAROL T., Ömür F. D., AKÇAY S. B., GÜLER O., ERDEMİR F.

Arabian Journal for Science and Engineering , 2024 (SCI-Expanded)

Thermophysical properties and solar thermal energy storage performance of phase change composites manufactured by vat photopolymerization 3D printing technique

Er Y., Güler O., Hekimoğlu G., Nodehi M., Ustaoğlu A., Sarı A., et al.

JOURNAL OF ENERGY STORAGE , cilt.73, 2023 (SCI-Expanded)

A study on the improvement of wear and corrosion properties of ZA40/Graphene/B4C hybrid nanocomposites

Çelebi M., Çanakçı A., Güler O., Karabacak H., Akgül B., Özkaya S.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.966, 2023 (SCI-Expanded)

The effect of recycled zinc powder content on the properties of novel novolac matrix hybrid composites

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T., Çuvalcı O.

TRIBOLOGY INTERNATIONAL , cilt.188, 2023 (SCI-Expanded)

The effect of candle-soot reinforced electroless Ni-P particle interface on tribological performance in copper-based materials produced by flake powder metallurgy method: Transfer of candle-soot from waste to solid-lubricant

Güler O.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS , cilt.673, 2023 (SCI-Expanded)

The effect of advanced electrodeposited Ni-P-Cu coatings obtained with scrap cu plates on the tribological performance of Al powder metallurgy products

Güler O., Çelebi M., Karabacak A. H., Çanakçı A.

SURFACE & COATINGS TECHNOLOGY , cilt.468, 2023 (SCI-Expanded)

Study on Effect of Milling Time on the Mechanical and Wear Properties of the ZA40-B4C-Graphene Hybrid Nanocomposites Fabricated by Vacuum Hot-Pressing

Çelebi M., Çanakçı A., Güler O., Akgül B., Karabacak A. H.

JOM , cilt.75, sa.9, ss.3935-3950, 2023 (SCI-Expanded)

Effect of ball mill time and wet pre-milling on the fabrication of Ti powders by recycling Ti machining chips by planetary milling

Çuvalcı O., Varol T., Akçay S. B., Güler O., Çanakçı A.

POWDER TECHNOLOGY , cilt.426, 2023 (SCI-Expanded)

Production of Al2024/h-BN nanocomposites with improved corrosion, wear and mechanical properties

Karabacak A. H., Çanakçı A., Çelebi M., Güler O., Tunç S. A., Arpacı K. A.

Materials Chemistry and Physics , cilt.300, 2023 (SCI-Expanded)

The evolution of microstructure and properties of Cu-Cr alloys synthesized via flake powder metallurgy assisted by mechanical alloying and hot pressing

VAROL T., GÜLER O., AKÇAY S. B., ÇOLAK H.

MATERIALS TODAY COMMUNICATIONS , cilt.33, 2022 (SCI-Expanded)

Structure and tribological properties of composites based on a Novolac matrix with Ni-P electrolytic coating

Güler O., Kocaman M., Akçay S. B., Çuvalcı H., Varol T.

SURFACE & COATINGS TECHNOLOGY , cilt.451, 2022 (SCI-Expanded)

Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing

ÇELEBİ M., ÇANAKÇI A., GÜLER O., ÖZKAYA S., KARABACAK A. H., Arpaci K. A.

JOM , cilt.74, sa.11, ss.4449-4461, 2022 (SCI-Expanded)

Novel Flame-retarded Novolac Matrix Hybrid Composites with Graphite Particles and Glass Fiber Reinforcement

KOCAMAN M., ÇUVALCI H., GÜLER O.

FIBERS AND POLYMERS , cilt.23, sa.7, ss.2017-2029, 2022 (SCI-Expanded)

Effects of fabrication parameters and post-processing treatments on the mechanical and tribological behavior of surface-enhanced copper based materials by selective laser melting

Aksa H. C., Hacısalihoğlu İ., Yıldız F., VAROL T., GÜLER O., Kaya G., et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.304, 2022 (SCI-Expanded)

Enhancement of electrical and thermal conductivity of low-cost novel Cu–Ag alloys prepared by hot-pressing and electroless plating from recycled electrolytic copper powders

VAROL T., GÜLER O., AKÇAY S. B., Çuvalcı O.

Materials Chemistry and Physics , cilt.281, 2022 (SCI-Expanded)

Novel advanced copper-silver materials produced from recycled dendritic copper powders using electroless coating and hot pressing

Varol T., Güler O., Akçay S. B., Aksa H. C.

Powder Metallurgy , cilt.65, sa.5, ss.390-402, 2022 (SCI-Expanded)

Electroless nickel-phosphorus coated expanded graphite paper: Binder-free, ultra-thin, and low-cost electrodes for high-performance supercapacitors

ERDEMİR F., GÜLER O., Canakc A.

JOURNAL OF ENERGY STORAGE , cilt.44, 2021 (SCI-Expanded)

The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nanocomposites produced by powder metallurgy

ÇELEBİ M., GÜLER O., ÇANAKÇI A., ÇUVALCI H.

JOURNAL OF COMPOSITE MATERIALS , cilt.55, sa.24, ss.3395-3408, 2021 (SCI-Expanded)

The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating

GÜLER O., VAROL T., ALVER Ü., BIYIK S.

Advanced Powder Technology , cilt.32, ss.2873-2890, 2021 (SCI-Expanded)

The Effect of Selective Laser Melting Process on the Microstructure, Density, and Electrical Conductivity of Silver-Coated Copper Cores

VAROL T., Hacısalihoğlu İ., Kaya G., GÜLER O., Yıldız F., Aksa H. C., et al.

Journal of Materials Engineering and Performance , cilt.30, sa.7, ss.5216-5226, 2021 (SCI-Expanded)

Microstructure and wear characterization of Al2O3 reinforced silver coated copper matrix composites by electroless plating and hot pressing methods

GÜLER O., VAROL T., ALVER Ü., Kaya G., Yıldız F.

Materials Today Communications , cilt.27, 2021 (SCI-Expanded)

The effect of silver coated copper particle content on the properties of novel Cu-Ag alloys prepared by hot pressing method

VAROL T., GÜLER O., Akcay S. B., Aksa H. C.

Powder Technology , cilt.384, ss.236-246, 2021 (SCI-Expanded)

Effect of TiN, TiAlCN, AlCrN, and AlTiN ceramic coatings on corrosion behavior of tungsten carbide tool

Bilgin S., Güler O., Alver Ü., Erdemir F., Aslan M., Çanakçı A.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.57, sa.1, ss.263-273, 2021 (SCI-Expanded)

Novel ZA27/B4C/Graphite Hybrid Nanocomposite-Bearing Materials with Enhanced Wear and Corrosion Resistance

GÜLER O., ÇELEBİ M., Dalmış R., ÇANAKÇI A., ÇUVALCI H.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , cilt.51, sa.9, ss.4632-4646, 2020 (SCI-Expanded)

Effect of Al2O3 content and milling time on the properties of silver coated Cu matrix composites fabricated by electroless plating and hot pressing

Güler O., Varol T., Alver E., Çanakçı A.

MATERIALS TODAY COMMUNICATIONS , cilt.24, 2020 (SCI-Expanded)

Fabrication and characterization of novel layered materials produced by electroless plating and hot pressing

Güler O., Alver Ü., Varol T.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.835, 2020 (SCI-Expanded)

Effect of nano alumina content on corrosion behavior and microstructure of Za27/graphite/alumina hybrid nanocomposites

GÜLER O., ERDEMİR F., ÇELEBİ M., Cuvalc H., Canak A.

RESULTS IN PHYSICS , cilt.15, 2019 (SCI-Expanded)

Optical and Dielectric Properties of PMMA/alpha-Fe2O3-ZnO Nanocomposite Films

ALVER Ü., TASCIOGLU M. E., GÜLER O., ASLAN M., YAZGAN A., KAYA H., et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS , cilt.29, sa.5, ss.1514-1522, 2019 (SCI-Expanded)

The effect of flake-like morphology on the coating properties of silver coated copper particles fabricated by electroless plating

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.782, ss.679-688, 2019 (SCI-Expanded)

The Effect of Mechanical Milling on Graphite-Boron Carbide Hybrid Reinforced ZA27 Nanocomposites

Dalmis R., ÇUVALCI H., ÇANAKÇI A., GÜLER O., Celik E.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.43, sa.3, ss.1113-1124, 2018 (SCI-Expanded)

EFFECT OF FIBRE CONTENT ON THE MECHANICAL PROPERTIES OF BASALT FIBRE REINFORCED POLYLACTIC ACID (PLA) COMPOSITES

ASLAN M., KAYA M., GÜLER O., ALVER Ü.

TEKSTIL VE KONFEKSIYON , cilt.28, sa.1, ss.66-71, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites

GÜLER O., ÇUVALCI H., GÖKDAĞ M., ÇANAKÇI A., ÇELEBİ M.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.7, ss.899-907, 2018 (SCI-Expanded)

Effect of nano-sized B4C addition on the mechanical properties of ZA27 composites

Dalmış R., ÇUVALCI H., CANAKCI A., GÜLER O.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION , cilt.32, sa.4, ss.747-752, 2017 (SCI-Expanded)

THE EFFECT OF NANO GRAPHITE PARTICLE CONTENT ON THE WEAR BEHAVIOUR OF ZA27 BASED HYBRID COMPOSITES

Guler O., Cuvalci H., Canakci A., Celebi M.

ADVANCED COMPOSITES LETTERS , cilt.26, sa.2, ss.30-36, 2017 (SCI-Expanded)

INVESTIGATION OF GRAPHITE NANO PARTICLE ADDITION ON THE PHYSICAL AND MECHANICAL PROPERTIES OF ZA27 COMPOSITES

Dalmis R., Cuvalci H., Canakci A., Guler O.

ADVANCED COMPOSITES LETTERS , cilt.25, sa.2, ss.37-42, 2016 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Advanced antibacterial effect of bioactive natural hydroxyapatite biocomposites

ÖZKAYA S., GÜLER O.

Studies in Natural Products Chemistry , cilt.82, ss.55-112, 2024 (Scopus)

Akımsız nikel kaplama süresinin yeni tür dentritik bakır-nikel alaşım tozlarının özellikleri üzerine etkisi

Güler O.

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.12, sa.3, ss.1013-1020, 2023 (Hakemli Dergi)

Yüksek Al2O3 Oranları ile Takviye Edilmiş Al-Cu-Mg Alaşımlarının Sıcak Pres Yöntemi ile Üretimi

AKÇAY S. B., VAROL T., AKSA H. C., GÜLER O.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.11, sa.1, ss.111-124, 2023 (Hakemli Dergi)

Sıcak Presleme Yöntemi ile Üretilen Cu-Cr Alaşımlarının Sertlik ve Elektriksel İletkenlik Özellikleri Üzerine Mekanik Alaşımlama Süresinin Etkisi

Çolak H., Akçay S. B., Varol T., Güler O., Aksa H. C.

Karaelmas Fen ve Mühendislik Dergisi , cilt.12, sa.1, ss.47-58, 2022 (Hakemli Dergi)

Effect of Boron Carbide Reinforcement Amount on the Properties of Boron Carbide Reinforced Al Based Composites Bor Karbür Takviyeli Al Esaslı Kompozitlerin Özellikleri Üzerine Bor Karbür Takviye Miktarının Etkisi

AKÇAY S. B., VAROL T., GÜLER O., Aksa H. C.

El-Cezeri Journal of Science and Engineering , cilt.9, sa.2, ss.869-881, 2022 (Scopus)

Al2024/SiC Kompozitlerin Yüksek SiC Takviyesi ile Üretimi ve Karakterizasyonu

Akçay S. B., Varol T., Aksa H. C., Güler O.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.22, sa.2, ss.353-365, 2022 (Hakemli Dergi)

OPTIMIZATION OF ZINC-BASED HYBRID NANOCOMPOSITES USING TAGUCHI GREY RELATION ANALYSIS

Güler O., Gajević S., Miladinović S., Çuvalcı H., Stojanović B.

Mobility & Vehicle Mechanics , cilt.47, sa.3, ss.9-22, 2021 (Hakemli Dergi)

Multi response parameters optimization of ZA-27 nanocomposites

Gajevic S., Miladinović S., Güler O., Çuvalcı H., Miloradović N., Stojanović B.

Advanced Technologies & Materials , cilt.46, sa.1, ss.11-18, 2021 (Hakemli Dergi)

Akımsız kaplama yöntemi ile Cu-Ag bimetal parçacıkların üretimi ve karakterizasyonu

Varol T., Akçay S. B., Güler O.

Gümüşhane Üniversitesi Fen Bilimleri Dergisi , cilt.11, sa.2, 2021 (Hakemli Dergi)

Katmanlı Parçacıklar Kullanılarak Üretilen Bakır Esaslı Malzemelerin Karakterizasyonu

Varol T., Aksa H. C., Güler O.

Karadeniz Fen Bilimleri Dergisi , cilt.10, sa.2, ss.346-358, 2020 (Hakemli Dergi)

The investigation of the mechanical properties of sandwich panel composites with different surface and core materials

ASLAN M., GÜLER O., ALVER Ü.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.24, sa.6, ss.1062-1068, 2018 (ESCI)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Investigation of the effects of Electrolytic Ni-P Coating on the Wear Properties of Glass Fiber and Graphite Reinforced Novolac Matrix Hybrid Composites

Akçay S. B., Kocaman M., Güler O., Varol T., Çuvalcı H.

2nd International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 15 - 18 Ekim 2022, ss.1132-1136

EFFECT OF THE ELECTROLESS NI-P COATING ON THE PROPERTIES OF CU PARTICLES

AKÇAY S. B., GÜLER O., VAROL T.

3rd International Conference on Applied Engineering and Natural Sciences, Türkiye, 20 - 23 Temmuz 2022, ss.1447-1451

Effect of Ni-P Coating on The Microstructure of Copper-Based Materials Produced by Hot-Pressing

AKÇAY S. B., GÜLER O., VAROL T.

3rd International Conference on Applied Engineering and Natural Sciences, Türkiye, 20 - 23 Temmuz 2022, ss.1351-1354

Application of electrolytic Ni-P coatings onto Novolac/Graphite/Glass Fiber hybrid composites

Güler O., Kocaman M.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.526-531

The Effect of Electroless Coating and Ball Milling on the Properties of Cu/Ag Compact Materials

Başar E. Y., VAROL T., AKÇAY S. B., GÜLER O.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 Mayıs 2022, ss.2366-2370

Effect of Mechanical Milling and Electroless Silver Coating on the Oxidation Resistance of Copper Powder Produced by Electrolysis

Sevinç M., VAROL T., AKÇAY S. B., GÜLER O.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 Mayıs 2022, ss.2356-2360

Influence of the graphite content on the tribological properties of Novolac/GF/Gr hybrid composites

Kocaman M., Çuvalcı H., Güler O.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.516-522

Mechanical and Tribological Properties of SLMed Silver Coated Copper Powder Material

Kaya G., Güler O., Aksa H. C., Akçay S. B., Hacısalihoğlu İ., Varol T., et al.

1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Türkiye, 15 - 17 Aralık 2021, ss.682-690

Effect of glass fiber rate on the mechanical and physical properties of Novolac/Gr/Glass fiber hybrid composites

Kocaman M., Çuvalcı H., Güler O.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.301-307

THE SYNTHESIS OF COPPER-CHROMIUM ALLOY PARTICLES BY MECHANICAL ALLOYING METHOD

Çolak H., Varol T., Güler O., Akçay S. B., Aksa H. C.

3rd INTERNATIONAL GOBEKLITEPE APPLIED SCIENCES CONGRESS , Şanlıurfa, Türkiye, 1 - 03 Ekim 2021, ss.162-167

EFFECT OF MECHANICAL ALLOYING TIME ON ELECTRICAL CONDUCTIVITY AND HARDNESS OF COPPER-CHROMIUM ALLOYS

Çolak H., Varol T., Güler O., Akçay S. B., Aksa H. C.

3rd INTERNATIONAL GOBEKLITEPE APPLIED SCIENCES CONGRESS, Şanlıurfa, Türkiye, 1 - 03 Ekim 2021, ss.168-175

THE EFFECT OF HOT-PRESSING TEMPERATURE ON THE HARDNESS AND ELECTRICAL CONDUCTIVITY OF CU-AG LAYERED COMPACTS PRODUCED BY ELECTROLESS COATING AND POWDER METALLURGY

Varol T., Güler O., Akçay S. B.

INTERNATIONAL ASIAN CONGRESS ON CONTEMPORARY SCIENCES V, Nakhchivan, Azerbaycan, 1 - 02 Haziran 2021, ss.321-329

THE EFFECT OF PRESSURE ON THE HARDNESS AND ELECTRICAL CONDUCTIVITY OF CU-AG LAYERED MATERIALS PRODUCED BY POWDER METALLURGY ASSISTED BY ELECTROLESS COATING

Varol T., Güler O., Aksa H. C., Çuvalcı O.

INTERNATIONAL ASIAN CONGRESS ON CONTEMPORARY SCIENCES V, Nakhchivan, Azerbaycan, 1 - 02 Haziran 2021, ss.313-320

Optimization of hybrid ZA‐27 nanocomposites using ANOVA and ANN analysis

Gajevic S., Miladinovic‬ ‪., Güler O., Çuvalcı H., Miloradovic ‪., Stojanovic ‪.

15th International Conference on Accomplishments in Mechanical and Industrial Engineering, Banja Luka, Bosna-Hersek, 29 Mayıs 2021, ss.357-362

SICAK PRESLEME YÖNTEMİ İLE ELDE EDİLEN GÜMÜŞ KAPLI BAKIR ESASLI MALZEMELERİN KARAKTERİZASYONU

Varol T., Aksa H. C., Güler O.

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Ekim 2020, ss.70-73

The Effect of pH on the Plating Layer of Silver Plated CopperPowders by Electroless Plating Method

VAROL T., AKÇAY S. B., GÜLER O., ALVER Ü.

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Ekim 2020, ss.60-64

TOZ METALURJİSİ YÖNTEMİ İLE ÜRETİLEN CU-AG ALAŞIMLARININ KARAKTERİZASYONU

Varol T., Aksa H. C., Güler O., Alver Ü.

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Ekim 2020, ss.74-77

The Effect of Reducing Agent Amount on the Properties ofElectroless Silver Plated Copper Powders

VAROL T., AKÇAY S. B., GÜLER O.

5. International Conference on Material Science and Technology (IMSTEC 2020), 16 - 18 Ekim 2020, ss.65-69

OPTIMIZATION OF ZINC-BASED HYBRID NANOCOMPOSITES USING TAGUCHI GREY RELATION ANALYSIS

Güler O., Gajević S., Miladinović S., Çuvalcı H., Stojanović B.

8th International Congress Motor Vehicles & Motors 2020, Pomoravski, Sırbistan, 8 - 09 Ekim 2020, ss.150-158

Wear Properties of Cu-Ag-Ni Composites Produced by Electroless Coaitng and Hot-Pressing

Güler O., Varol T., Alver Ü., Akçay S. B.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 Aralık 2019, ss.198-207

THE EFFECT OF MECHANICAL MILLING TIME AND SILVER COATING ON THE PROPERTIES OF THE SILVER COATED COPPER MATRIX COMPOSITES

Güler O., Varol T., Alver Ü., Aksa H. C.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.219-228

PRODUCTION OF CU-AG-CR COMPOSITES FROM THE LAYERED METALLICPOWDERS

Güler O., Varol T., Alver Ü., Akçay S. B.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.190-197

THE EFFECT OF ALUMINA CONTENT AND ELECTROLESS SILVER COATING ON THE PROPERTIES OF THE SILVER COATED COPPER MATRIX COMPOSITES

Güler O., Varol T., Alver Ü., Aksa H. C.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.208-218

Fabrication of Cu-Ag-Ni Layered Bulk Samples by Electroless Plating and Powder Metallurgy Method

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 19 - 21 Eylül 2019, cilt.25, ss.346-352

Oxidation Resistance of Silver Coated Copper Powders with Different Morphologies

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 19 - 21 Eylül 2019, cilt.25, ss.340-345

The Investigation of the Mechanical and Physical Properties of Silver Coated Copper Fabricated by Electroless Coating

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Türkiye, 13 - 15 Haziran 2019, ss.197

The Effect of Milling Time On the Coating Thickness of Silver Coated Copper Particles

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Türkiye, 13 - 15 Haziran 2019, ss.195

The Effect of Silver Coating on the Corrosion Behavior of Copper Based Materials

Alver Ü., Güler O., Varol T., Aslan M.

19th International Metallurgy & Materials Congress (IMMC), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1121-1123

The Effect of Ball Milling Time on the Properties of Silver Coated Copper Materials Produced by Powder Metallurgy

GÜLER O., ERDEMİR F., VAROL T., ALVER Ü.

19th International Metallurgy and Materials Congress (IMMC), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.176-178

The Investigation of the Eff ect of Nitrocarburizing on the Corrosion Resistance of AISI 4140 Steel

GÜLER O., Demir D., ÇUVALCI H., ALVER Ü.

19th International Metallurgy and Materials Congress (IMMC), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1194-1197

Synthesis Of Fluorine Doped Tin Oxide Nanoparticles (Fto) By Sol-Gel Technique

Tuzcu E., Alver Ü., Güler O., Aslan M., Bilgin S.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.451

Fabrication Of ZnO Nanoparticles By Solution Combustion Metho

Bilgin S., Alver Ü., Güler O., Aslan M., Tuzcu E.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.450

Parameters Of The Shear Strength Of The 3-D Printed Pla Samples

GÜLER O., İpek H., ASLAN M., ÇAVA K.

International Tecnological Sciences and Design Symposium, 27 - 29 Haziran 2018

A Study on The Electroless Nickel Coating on the Copper Powder Particles by Chemical Route

GÜLER O., İPEK H., ÇUVALCI H.

International Tecnological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.438

THE EFFECT OF MECHANICAL MILLING TIME ON THE PHYSICAL AND MECHANICAL PROPERTIES OF THE ZA27/GRAPHTIE NANOCOMPOSITES

Güler O., Çelebi M., Çuvalcı H., Çanakçı A.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.674-677

THE EFFECT OF MILLING TIME ON THE MORPHOLOGY AND SIZE OF THE ZA27 BASED COMPOSITE POWDERS

Güler O., Çelebi M., Çuvalcı H.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.678-681

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÇUVALCI H., GÜLER O., ERDEMİR F.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.364-370

Effects Of Alumina Nanoparticle Content On The Microstructure And Mechanical Properties Of ZA27/Al2O3 Nanocomposites Fabricated By Powder Metallurgy

ÇELEBİ M., ÇUVALCI H., ÇANAKÇI A., GÜLER O., VAROL T.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.353-358

An Investigation on the Mechanical Properties of the Sandwich Panel Composites

Aslan M., Güler O., Çava K., Alver Ü., Yüceloğlu E.

II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.602-610

The Effect of the Reinforcement Content on the Mechanical and Physical Properties of the Polyester Based Carbon and Basalt Fibers Reinforced Composites

Aslan M., Güler O., Kaymaz E. G., Alver Ü.

II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.627-635

The Effect of Basalt Fiber Content on the Physical-Mechanical Properties of the Basalt Fiber Reinforced Polylactic Acid (PLA) Composites

Aslan M., Güler O., Kaya M., Alver Ü.

II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.621-626

Mechanical Performance of Laminar and Tubular Carbon Epoxy Prepreg Composites by Vacuum Bag Oven Method

Aslan M., Güler O., Kaya M., Alver Ü.

II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.611-620

Investigation of Effect of Layer Thickness and Fan Speed on Mechanical, Surface and Microscopic Properties of 3D Printed ABS Polymers

ASLAN M., GÜLER O., ALVER Ü., ÇAVA K.

2nd International Symposium on 3D Printing Technologies (3D-PTS2017), 3 - 04 Nisan 2017

TENSILE PROPERTIES OF CARBON/JUTE WOVEN FIBRE REINFORCED POLYESTER COMPOSITES

ASLAN M., ALVER Ü., GÜLER O.

INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, Saray Bosna, Bosna-Hersek, 22 - 26 Mart 2017, ss.129

MECHANICAL CHARACTERISATION OF GLASS/FLAX WOVEN FIBRE REINFORCED HYBRID COMPOSITES

ASLAN M., ALVER Ü., GÜLER O.

INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, Saray Bosna, Bosna-Hersek, 22 - 26 Mart 2017, ss.128

SYNTHESIS, CHARACTERIZATION AND OPTICAL PROPERTIES OF THE PMMA BASED NANOCOMPOSITES

ALVER Ü., ASLAN M., GÜLER O., Taşçıoğlu M.

INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND INNOVATION, Saray Bosna, Bosna-Hersek, 22 - 26 Mart 2017, ss.126

Effects of Nitrocarburizing on the Corrosion Behavior of AISI 4140 Steel

ALVER Ü., ÇUVALCI H., GÜLER O., ERDEMİR F., Demir D.

International Conference on Engineering Technology and Innovation, Saray Bosna, Bosna-Hersek, 22 - 26 Mart 2017, ss.125

CORROSION BEHAVIOR OF ZA27/GRAPHITE/AL2O3 HYBRID NANOCOMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.

XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.541-547

THE EFFECT OF GRAPHITE CONTENT ON THE CORROSION CHARACTERISTIC OF ZA27 ALLOY BASED COMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.

XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.535-540

THE EFFECT OF NANO-Al2O3 CONTENT ON THE CORROSION BEHAVIOUR OF ZA27/Al2O3 NANOCOMPOSITES

Çelebi M., Çuvalcı H., Güler O., Çanakçı A.

XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.566-570

The Effect of Nano-Particle Content on the Wear Behavior of ZA27/Al2O3 Nanocomposites

GÜLER O., ÇUVALCI H., ÇANAKÇI A., ÇELEBİ M.

2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Saray Bosna, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.199-206

The Effect of Graphite Content on the Wear Behavior of ZA27/Al2O3/Graphite Hybrid Nanocomposites

GÜLER O., ÇUVALCI H., ÇANAKÇI A., ÇELEBİ M.

2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Saray Bosna, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.192-198

THE EFFECT OF NANO PARTICLE REINFORCEMENT ONMICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZA27/GRAPHITEAND ZA27/Al2O3 COMPOSITES FABRICATED BY HOT PRESSING METHOD

Çelebi M., Çuvalcı H., Çanakçı A., Güler O., Erdemir F.

3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.580-584

THE EFFECT OF AL2O3 CONTENT ON THE WEAR BEHAVIOR OFZA27/Al2O3/GRAPHITE HYBRID NANOCOMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.

3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.558-569

MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF ZA27ALLOYS REINFORCED BY NANO-GRAPHITE AND NANO-ALUMINA

Çelebi M., Çuvalcı H., Çanakçı A., Güler O.

3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.400-406

Kitap & Kitap Bölümleri

Advanced antibacterial effect of bioactive natural hydroxyapatite biocomposites

Özkaya S., Güler O.

Studies in Natural Products Chemistry, Atta-ur-Rahman, Editör, Elsevier Science, Oxford/Amsterdam , Amsterdam, ss.55-112, 2024

Sustainable Energy Storage With Carbon Materials From Wastes Through Biochar PCM Composites: Biochar-Derived PCM Composites

Güler O.

Carbon-Based Materials and Environmental Remediation: Graphene, Biochar, and More, N. Nirmala,Jayaseelan Arun,S. S. Dawn, Editör, IGI Global yayınevi, Pennsylvania, ss.369-408, 2024

Metrikler

Yayın

124

Atıf (WoS)

691

H-İndeks (WoS)

Atıf (Scopus)

746

H-İndeks (Scopus)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Kitap & Kitap Bölümleri

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Proje

Açık Erişim