Prof.Dr. AYKUT &#199;ANAK&#199;I

VAROL T., ÇANAKÇI A., YALÇIN E. D.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.739, ss.1005-1014, 2018 (SCI-Expanded)

The Effect of Mechanical Milling on Graphite-Boron Carbide Hybrid Reinforced ZA27 Nanocomposites

Dalmis R., ÇUVALCI H., ÇANAKÇI A., GÜLER O., Celik E.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.43, sa.3, ss.1113-1124, 2018 (SCI-Expanded)

Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.6, ss.742-750, 2018 (SCI-Expanded)

Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites

GÜLER O., ÇUVALCI H., GÖKDAĞ M., ÇANAKÇI A., ÇELEBİ M.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.7, ss.899-907, 2018 (SCI-Expanded)

Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites

VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.3, ss.312-323, 2018 (SCI-Expanded)

Effect of nano-sized B4C addition on the mechanical properties of ZA27 composites

Dalmış R., ÇUVALCI H., CANAKCI A., GÜLER O.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION , cilt.32, sa.4, ss.747-752, 2017 (SCI-Expanded)

Fabrication of NanoSiC-Reinforced Al2024 Matrix Composites by a Novel Production Method

Arabian Journal for Science and Engineering , cilt.42, sa.5, ss.1751-1764, 2017 (SCI-Expanded)

An investigation on wear behavior of Cu-graphite nanocomposites prepared by flake powder metallurgy

INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.69, sa.1, ss.8-14, 2017 (SCI-Expanded)

THE EFFECT OF FLAKE MICROSTRUCTURE ON THE PREPARATION AND PROPERTIES OF Cu–GRAPHITE SINTERED NANOCOMPOSITES

VAROL T., ÇANAKÇI A., YALÇIN E. D.

POWDER METALLURGY AND METAL CERAMICS , sa.55, ss.426-436, 2016 (SCI-Expanded)

Fabrication of NanoSiC-Reinforced Al2024 Matrix Composites by a Novel Production Method

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , sa.10, ss.1-10, 2016 (SCI-Expanded)

The effect of type and ratio of reinforcement on the synthesis and characterization Cu-based nanocomposites by flake powder metallurgy

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.649, ss.1066-1074, 2015 (SCI-Expanded)

Corrosion and wear behavior of functionally graded Al2024/SiC composites produced by hot pressing and consolidation

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.644, ss.589-596, 2015 (SCI-Expanded)

Development and characterization of bronze-Cr-Ni composites produced by powder metallurgy

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.22, sa.4, ss.425-432, 2015 (SCI-Expanded)

Artificial neural network to predict the effect of heat treatment, reinforcement size, and volume fraction on AlCuMg alloy matrix composite properties fabricated by stir casting method

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.78, ss.305-317, 2015 (SCI-Expanded)

New Coating Technique for Al-B4C Composite Coatings by Mechanical Milling and Composite Coating

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

POWDER METALLURGY AND METAL CERAMICS , cilt.53, sa.11-12, ss.672-679, 2015 (SCI-Expanded)

Synthesis and characterization of hybrid nanocomposite powders via mechanical alloying

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.45, sa.1, ss.67-72, 2015 (SCI-Expanded)

NEW COATING TECHNIQUE FOR Al–B4C COMPOSITE COATINGS BY MECHANICAL MILLING AND COMPOSITE COATING

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

POWDER METALLURGY AND METAL CERAMICS , ss.672-678, 2015 (SCI-Expanded)

Modeling of the Prediction of Densification Behavior of Powder Metallurgy Al-Cu-Mg/B4C Composites Using Artificial Neural Networks

ACTA METALLURGICA SINICA-ENGLISH LETTERS , cilt.28, sa.2, ss.182-195, 2015 (SCI-Expanded)

Synthesis and Characterization of Hybrid Nanocomposite powders via Mechanical Alloying

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , sa.45, ss.67-72, 2015 (SCI-Expanded)

SYNTHESIS AND CHARACTERIZATION OF HYBRID NANOCOMPOSITE POWDERS VIA MECHANICAL ALLOYING

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.45, sa.1, ss.67-72, 2015 (SCI-Expanded)

Microstructure and properties of AA7075/Al-SiC composites fabricated using powder metallurgy and hot pressing

ÇANAKÇI A., ÖZŞAHİN Ş., VAROL T.

POWDER TECHNOLOGY , cilt.268, ss.72-79, 2014 (SCI-Expanded)

Effect of process parameters on the formation of Fe-Al intermetallic coating fabricated by mechanical alloying

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.21, sa.6, ss.595-600, 2014 (SCI-Expanded)

Effects of a new pre-milling coating process on the formation and properties of an Fe-Al intermetallic coating

ÇANAKÇI A., ERDEMİR F., VAROL T., Dalmis R., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.268, ss.110-117, 2014 (SCI-Expanded)

Physical and mechanical properties of stir-casting processed AA2024/B4Cp composites

ÇANAKÇI A., Arslan F., VAROL T.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.21, sa.4, ss.505-515, 2014 (SCI-Expanded)

Microstructure and Abrasive Wear Behavior of CuSn10-Graphite Composites Produced by Powder Metallurgy

ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

POWDER METALLURGY AND METAL CERAMICS , cilt.53, ss.275-287, 2014 (SCI-Expanded)

Prediction of Effect of Reinforcement Size and Volume Fraction on the Abrasive Wear Behavior of AA2014/B4Cp MMCs Using Artificial Neural Network

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.39, sa.8, ss.6351-6361, 2014 (SCI-Expanded)

Microstructure and properties of Fe-Al intermetallic coatings on the low carbon steel synthesized by mechanical alloying

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., Mindivan H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.73, ss.849-858, 2014 (SCI-Expanded)

Prediction of the influence of processing parameters on synthesis of Al2024-B4C composite powders in a planetary mill using an artificial neural network

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.21, sa.3, ss.411-420, 2014 (SCI-Expanded)

Prediction of the influence of processing parameters on synthesis of composite powders in planetary mill using artificial neural network

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.21, sa.3, ss.411-420, 2014 (SCI-Expanded)

Synthesis of novel CuSn10-graphite nanocomposite powders by mechanical alloying

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

MICRO & NANO LETTERS , cilt.9, sa.2, ss.109-112, 2014 (SCI-Expanded)

Effect of weight percentage and particle size of B4C reinforcement on physical and mechanical properties of powder metallurgy Al2024-B4C composites

METALS AND MATERIALS INTERNATIONAL , cilt.19, sa.6, ss.1227-1234, 2013 (SCI-Expanded)

Artificial neural network modeling to effect of reinforcement properties on the physical and mechanical properties of Al2024-B4C composites produced by powder metallurgy

COMPOSITES PART B-ENGINEERING , cilt.54, ss.224-233, 2013 (SCI-Expanded)

Determining the effect of process parameters on particle size in mechanical milling using the Taguchi method: Measurement and analysis

ÇANAKÇI A., ERDEMİR F., VAROL T., Patir A.

MEASUREMENT , cilt.46, sa.9, ss.3532-3540, 2013 (SCI-Expanded)

Formation of Fe-Al intermetallic coating on low-carbon steel by a novel mechanical alloying technique

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.247, ss.24-29, 2013 (SCI-Expanded)

Effect of particle size and ratio of B4C reinforcement on properties and morphology of nanocrystalline Al2024-B4C composite powders

POWDER TECHNOLOGY , cilt.246, ss.462-472, 2013 (SCI-Expanded)

Effect of volume fraction and size of B4C particles on production and microstructure properties of B4C reinforced aluminium alloy composites

ÇANAKÇI A., Arslan F., VAROL T.

MATERIALS SCIENCE AND TECHNOLOGY , cilt.29, sa.8, ss.954-960, 2013 (SCI-Expanded)

Analysis of the effect of a new process control agent technique on the mechanical milling process using a neural network model: Measurement and modeling

MEASUREMENT , cilt.46, sa.6, ss.1818-1827, 2013 (SCI-Expanded)

Synthesis and characterization of nanocrystalline Al 2024-B4C composite powders by mechanical alloying

PHILOSOPHICAL MAGAZINE LETTERS , cilt.93, sa.6, ss.339-345, 2013 (SCI-Expanded)

Prediction of effect of volume fraction, compact pressure and milling time on properties of Al-Al2O3 MMCs using neural networks

METALS AND MATERIALS INTERNATIONAL , cilt.19, sa.3, ss.519-526, 2013 (SCI-Expanded)

STRUCTURAL EVOLUTION AND CHARACTERIZATION OF NANOSTRUCTURED Al-Al2O3 COMPOSITE FABRICATED BY MECHANICAL ALLOYING METHOD

ÇANAKÇI A., ÖZŞAHİN Ş., VAROL T.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.43, sa.3, ss.312-319, 2013 (SCI-Expanded)

Abrasive wear behaviour of B4C particle reinforced Al2024 MMCs

ÇANAKÇI A., Arslan F.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.63, ss.785-795, 2012 (SCI-Expanded)

Effects of amount of methanol on characteristics of mechanically alloyed Al-Al2O3 composite powders

ÇANAKÇI A., VAROL T., Nazik C.

MATERIALS TECHNOLOGY , cilt.27, sa.4, ss.320-327, 2012 (SCI-Expanded)

The effect of mechanical alloying on Al2O3 distribution and properties of Al2O3 particle reinforced Al-MMCs

ÇANAKÇI A., VAROL T., Ertok S.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.19, sa.3, ss.227-235, 2012 (SCI-Expanded)

Modeling the influence of a process control agent on the properties of metal matrix composite powders using artificial neural networks

POWDER TECHNOLOGY , cilt.228, ss.26-35, 2012 (SCI-Expanded)

Microstructure and abrasive wear behaviour of B4C particle reinforced 2014 Al matrix composites

Canakci A.

JOURNAL OF MATERIALS SCIENCE , cilt.46, sa.8, ss.2805-2813, 2011 (SCI-Expanded)

Pre-treatment process of B4C particles to improve incorporation into molten AA2014 alloy

Canakci A., Arslan F., Yasar I.

JOURNAL OF MATERIALS SCIENCE , cilt.42, sa.23, ss.9536-9542, 2007 (SCI-Expanded)

The effect of brush spring pressure on the wear behaviour of copper-graphite brushes with electrical current

Yasar I., Canakci A., Arslan F.

TRIBOLOGY INTERNATIONAL , cilt.40, sa.9, ss.1381-1386, 2007 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Investigation of Tribological Applications and Mechanical Properties of Zinc-Aluminium (ZA40)/Multi-Wall Carbon Nanotube (MWCNT) Composite Alloys

Gültekin G., ÇANAKÇI A., CANPOLAT Ö.

TEHNICKI GLASNIK-TECHNICAL JOURNAL , cilt.17, sa.4, ss.620-627, 2023 (ESCI) Sürdürülebilir Kalkınma

$Al_2O_3$ ve SiC Takviyeli AA2024 Esaslı Kompozitlerin Mikroyapı ve Mekanik Özelliklerinin İncelenmesi

ÇALIGÜLÜ U., ÇANAKÇI A., turkmen m., DARCAN N., KAÇMIŞ M. V.

International Journal of Innovative Engineering Applications , cilt.7, sa.1, ss.101-112, 2023 (Hakemli Dergi)

Effect of Milling Time and Process Control Agent on Microstructure and Mechanical Properties of AA2024-2 wt.% Cu Metal–Metal Composites Produced by Mechanical Alloying

Metallography, Microstructure, and Analysis , cilt.12, sa.3, ss.444-454, 2023 (ESCI)

Effects of multi walled carbon nanotube and silicon carbide reinforcement on wear performance in zinc-aluminium alloys

Karabacak A. H., Çanakçı A.

Nigde Omer Halisdemir University Journal of Engineering Sciences , cilt.12, sa.2, ss.588-596, 2023 (Hakemli Dergi) Sürdürülebilir Kalkınma

Farklı Seramik Takviyeli Al Alaşım Matrisli Nanokompozitlerin Mekanik ve Korozyon Özelliklerinin İncelenmesi

Karadeniz Fen Bilimleri Dergisi , cilt.13, sa.1, ss.1-14, 2023 (Hakemli Dergi)

Mechanical property and structural-elemental analysis of marine bivalve mollusc shells: Cerastoderma edule, Chamelea gallina, Donax trunculus, Ruditapes decussatus

Kocabaş F. K., KOCABAŞ M., ÇANAKÇI A., KARABACAK A. H.

International Aquatic Research , cilt.15, sa.1, ss.39-50, 2023 (ESCI)

Wear and Mechanical Behavior of ZA27 Alloy Reinforced with B4C Produced by Powder Metallurgy Method

Yalçın E. D., Çanakçı A., Erdemir F.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.35, sa.4, ss.1572-1583, 2022 (ESCI) Sürdürülebilir Kalkınma

Silisyum Karbür (SiC) ile Güçlendirilmiş Çinko-Alüminyum (ZA40) Alaşımının Aşınma Parametrelerinin İncelenmesi

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.22, sa.1, ss.207-213, 2022 (Hakemli Dergi) Sürdürülebilir Kalkınma

Hegzagonal Bor Nitrür Takviyeli ZA40 Alaşımının Mekanik ve Aşınma Özelliklerinin Araştırılması

Karadeniz Fen Bilimleri Dergisi , cilt.11, sa.2, ss.716-730, 2021 (Hakemli Dergi) Sürdürülebilir Kalkınma

A review on the performance of the materials by surface modification through EDM

Kumar S. S., VAROL T., ÇANAKÇI A., Kumaran S. T., Uthayakumar M.

International Journal of Lightweight Materials and Manufacture , cilt.4, sa.1, ss.127-144, 2021 (Scopus)

CORROSION AND WEAR PERFORMANCE OF ZA27/GRAPHENE/B4C HYBRID NANOCOMPOSITES PRODUCED BY POWDER METALLURGY

Acta Metallurgica Slovaca , cilt.26, sa.3, ss.126-131, 2020 (ESCI)

Investigation of WEDM process parameters of Al–SiC–B4C composites using response surface methodology

Kumar S. S., ERDEMİR F., VAROL T., Thirumalai K. S., Uthayakumar M., ÇANAKÇI A.

International Journal of Lightweight Materials and Manufacture , cilt.3, sa.2, ss.127-135, 2020 (Scopus)

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.

Universal Journal of Materials Science , cilt.6, sa.5, ss.163-169, 2018 (Hakemli Dergi)

PRODUCTION AND PROPERTIES OF AL2024-2 WT.% (SiC-B4C) HYBRID NANOCOMPOSITE

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

Technological Applied Sciences , cilt.13, ss.29-33, 2018 (Hakemli Dergi)

TOZ METALURJİSİ YÖNTEMİYLE ÜRETİLEN ZA27/GRAFEN NANOKOMPOZİTLERİN KOROZYON DAVRANIŞI

Technological Applied Sciences , cilt.13, sa.2, ss.157-164, 2018 (Hakemli Dergi)

PRODUCTION AND PROPERTIES OF AL2024-2 WT.% (SiC-B4C) HYBRID NANOCOMPOSITE

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

Technological Applied Sciences , cilt.13, sa.1, ss.29-33, 2018 (Hakemli Dergi)

PRODUCTION AND PROPERTIES OF AL2024-2 WT. (SiC-B4C) HYBRID NANOCOMPOSITE

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

Technological Applied Sciences , cilt.13, sa.1, ss.29-33, 2018 (Hakemli Dergi)

The Characterization of Graphite Nanoparticle Reinforced ZA27 based Nanocomposites Fabricated by Powder Metallurgy

ÇELEBİ M., GÜLER O., ÇUVALCI H., ÇANAKÇI A.

Progress in Materials Science and Engineering , cilt.1, sa.1, ss.1-12, 2017 (Hakemli Dergi)

Determination of Effect of B4C Content on Density and Tensile Strength of AA7075/ B4C Composite Produced via Powder Technology

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

International Journal of Materials, Mechanics and Manufacturing , cilt.4, sa.4, ss.251-254, 2015 (Hakemli Dergi)

Artificial Neural Network Approach to Predict the Abrasive Wear of AA2024-B4C Composites

ÇANAKÇI A., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.

Universal Journal of Materials Science , sa.6, ss.111-118, 2014 (Hakemli Dergi)

Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method

ÇANAKÇI A., VAROL T., ÖZKAYA S., ERDEMİR F.

Universal Journal of Materials Science , cilt.2, ss.90-95, 2014 (Hakemli Dergi)

Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloying

Nazik C., Tarakçıoğlu N., ÇANAKÇI A., VAROL T., ÖZKAYA S.

Usak University Journal of Material Sciences , sa.1, ss.47-53, 2014 (Hakemli Dergi)

Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying method

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S., Dalmış R.

Usak University Journal of Material Sciences , sa.1, ss.15-22, 2014 (Hakemli Dergi)

Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method

ÇANAKÇI A., VAROL T., ÖZKAYA S., ERDEMİR F.

Universal Journal of Materials Science , sa.5, ss.90-95, 2014 (Hakemli Dergi)

Production and microstructure of AA2024 – B4C metal matrix composites by mechanical alloying method

GEDİK GÜLTEKİN G., ÇANAKÇI A.

Usak University Journal of Material Sciences , sa.1, ss.15-22, 2012 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

FABRICATION and PROPERTIES INVESTIGATION of FeNiCuCrAl-1% B4C HIGH ENTROPY ALLOY

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.

UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.97-108

FABRICATION OF Ti-HAP-CNT HYBRID COMPOSITE BIOMATERIALS AND INVESTIGATION OF PROPERTIES

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.

UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.86-96

The Effect of Different PCA Types on the Properties of AA2024-B4C Composites

Tunç S. A., Çanakçı A., Karabacak A. H., Çelebi M.

2. BİLSEL International World Science and Research Congress, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.417-425

PRODUCTION AND PROPERTİES OF TI-HAP-CNT HYBRID BIOMATERIAL POWDERS BY POWDER

Karabacak A. H., Çanakçı A., Özkaya S., Çelebi M.

2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.320-334

Investigation of the Effect of TiH2 Amount on Foaming in AA2024 Based Metallic Foams Produced by Powder Metallurgy

Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.

2. BİLSEL International World Science and Research Congress, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.410-416

Production of SS316L/HA Functionally Graded Material For Biomedical Applications Using Powder Metallurgy

Canpolat Ö., Çanakçı A.

5th International Eurasian Conference on Biological and Chemical Sciences (EurasianBioChem 2022), Ankara, Türkiye, 23 - 25 Kasım 2022, ss.563-568

AA2024\Cr METAL-METAL KOMPOZİTLERİNİN MİKROYAPI ÖZELLİKLERİNİN İNCELENMESİ

7. Asia Pacific International Modern Sciences Congress, Jakarta, Endonezya, 04 Kasım 2022

AA2024\Ni METAL-METAL KOMPOZİTLERİNİN MEKANİK ÖZELLİKLERİNİN İNCELENMESİ

GEDİK GÜLTEKİN G., ÇANAKÇI A.

7. Asia Pacific International Modern Sciences Congress, Jakarta, Endonezya, 04 Kasım 2022

The Effect of Aging Time and Temperature on The Hardness and Tensile Strength of Al2024 Alloy and Al2024/Graphene/B4C Hybrid Nanocomposite

Çelebi M., Çanakçı A., Kocaman M.

2nd International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 15 - 18 Ekim 2022, ss.1104-1107

Production and Microstructure Investigations of 316L Stainless Steel Reinforced Copper Matrix Composites

Tunç S. A., Çanakçı A., Karabacak A. H.

3RD INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES, Konya, Türkiye, 20 - 23 Temmuz 2022, ss.1051-1055

Investigation of Mechanical Properties of Cu-316L Metal-Metal Composites Produced by Powder Metallurgy Method

Tunç S. A., Çanakçı A., Karabacak A. H.

3RD INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES, Konya, Türkiye, 20 - 23 Temmuz 2022, ss.2034-2039

Machining of Al2024-SiC Metal Matrix Nanocomposites with CNC Method

Karabacak A. H., Çanakçı A.

3rd International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 20 - 23 Temmuz 2022, ss.133-136

The Effect of The Amount of Reinforcement on The Machining of Al2024- B4C Nanocomposites by WEDM Method

Karabacak A. H., Çanakçı A.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.462-466

Corrosion Behavior of SS316L/ Al2O3 Composites Produced by Powder Metallurgy Technique

Canpolat Ö., Çanakçı A., Erdemir F., Gedik Gültekin G.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.165

Investigation of Microstructure and Mechanical Properties of SS316L/ Al2O3 Composites

Canpolat Ö., Çanakçı A., Erdemir F., Gedik Gültekin G.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.199

The effect of mechanical milling parameters on the properties of AA2024- 2 wt.% Cu composites produced by powder metallurgy

Gedik Gültekin G., Çanakçı A., Özkaya S., Canpolat Ö.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.167

Effect of Proccess Control Agents and Milling Time on the Powder Properties of AA2024/Cu Metal Matrix Composites

Gedik Gültekin G., Çanakçı A., Özkaya S., Canpolat Ö.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.166

Machining of Metal Matrix Hybrid Nanocomposites with WEDM Method

Karabacak A. H., Çanakçı A., Tunç S. A., Özkaya S.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.502-506

Production and Characterization of AA2024 Based Foam Layered Functionally Graded Composites

Tunç S. A., Çanakçı A., Karabacak A. H.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.498-501

Investigation of the Effect of Temperature and Foaming Time on AA2024 Based Metal Foam Production

Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 Kasım - 03 Aralık 2021, ss.494-497

The Effect of The Amount of Reinforcement on The Machining of Al2024-B4C/SiC Hybrid Nanocomposites by AWJ Method

Karabacak A. H., Çanakçı A., Tunç S. A.

1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.507-511

Investigation of XRD and SEM Analysis of Nickel and Hexagonal Boron Nitride Alloy Powders

6. ULUSLARARASI AKADEMİK ARAŞTIRMALAR KONGRESİ (ICAR-6), Ankara, Türkiye, 23 - 25 Ağustos 2021, cilt.6, ss.35-41

Hegzegonal Bor Nitrür Katkılı ZA40 Alaşımının Aşınma Parametrelerinin İncelenmesi

6. Uluslararası Bilimsel Çalışmalar Kongresi, İstanbul, Türkiye, 26 - 28 Temmuz 2021, cilt.6, ss.477-483 Sürdürülebilir Kalkınma

Nikel Katkılı ZA40 Alaşımının Aşınma Davranışlarının ve Mekanik Özelliklerinin İncelenmesi

5. Uluslararası Bilimsel Çalışmalar Kongresi (UBCAK), Elazığ, Türkiye, 15 - 17 Mart 2021, cilt.5, ss.311-317 Sürdürülebilir Kalkınma

Fabrication of SS316L–Al2O3 Composites and Investigation of Their Mechanical and Corrosion Behavior

Canpolat Ö., Çanakçı A.

IES’20 International Engineering Symposium |, İzmir, Türkiye, 5 - 06 Aralık 2020, ss.119-120

Production of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposites by Powder Metallurgy Method and Investigation of Mechanical Properties

Özkaya S., Çanakçı A., Karabacak A. H., Çanakçı S., Ceylan E.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Wear Behavior of AA2024-316L SS Metal Metal Composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F., Çelebi M.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Corrosion performance of AA2024-316L SS Metal-Metal composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

Synthesis and Investigation of Antibacterial Activity of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposite

Özkaya S., Çanakçı A., Çanakçı S., Ceylan E.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

The Effect of Hex-Boron Nitride Content on the Mechanical and Tribological Properties of Al-Based Alloy Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.1157-1161

The Effect of Mechanical milling on the Microstructure and Particle Morphology of ZnAl40Cu2/B4C/GrapheneHybridNanocomposites

ÇELEBİ M., ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.1162-1165

Fabrication of Cu-Ag-Ni Layered Bulk Samples by Electroless Plating and Powder Metallurgy Method

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 19 - 21 Eylül 2019, cilt.25, ss.346-352

Fabrication and Investigation of Properties of Hydroxyapatite CNT Bioceramics

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.645-650

Production and Comparison of Properties of B4C and SiC Reinforced Nanocomposites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.716-720

Oxidation Resistance of Silver Coated Copper Powders with Different Morphologies

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 19 - 21 Eylül 2019, cilt.25, ss.340-345

Mechanical and Physical Properties of Al2024-B4C/SiC Hybrid Nanocomposite by Fabrication Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.710-715

The Effect of Milling Time On the Coating Thickness of Silver Coated Copper Particles

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Türkiye, 13 - 15 Haziran 2019, ss.195

The Investigation of the Mechanical and Physical Properties of Silver Coated Copper Fabricated by Electroless Coating

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Türkiye, 13 - 15 Haziran 2019, ss.197

PRODUCTION OF Al2024 FOAMS BY POWDER SPACE HOLDER TECHNIQUE

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.5-7

Production of Al2024 Foams by Space Holder Technique

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

International Metallurgy and Materials Congress, 25 - 27 Ekim 2018, ss.236-239

Consolidation and Investigation of Properties of Hydroxyapatit-316L Stainless Steel Composites

ÖZKAYA S., ÇANAKÇI A., VAROL T., KARABACAK A. H., ÇELEBİ M., ERDEMİR F.

1. International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 Haziran - 29 Temmuz 2018, ss.828-834

The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., VAROL T.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.1752-1756

Evaluation of Microstructure and Mechanical Properties in the GGG40 Austempered Ductile Cast Iron

ÇALIGÜLÜ U., ISLAK S., ÇANAKÇI A., GENÇSOY U., KALLİ R.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.6-14

Evaluation of submicron particle sized colemanite minerals in warm mix asphalt mixtures

KÜTÜK T., KÜTÜK S., GÜNBEY R. E., ÇANAKÇI A., KOCAKERİM M. M.

8th International Advanced Technologies Symposium (IATS’17), Elazığ, Türkiye, 19 - 22 Ekim 2017, cilt.1, ss.143

The Investigation of Wear Performance of Fe/B4C/Graphene Hybrid Nanocomposites

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., ERDEMİR F.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.23

Effect of powder morphology on properties of Metal Matrix Composite Materials

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A.

International Advanced Researches & Engineering Congress, Osmaniye, Türkiye, 16 - 18 Kasım 2017, ss.800

THE EFFECT OF MILLING TIME ON THE MORPHOLOGY AND SIZE OF THE ZA27 BASED COMPOSITE POWDERS

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.687-689

THE EFFECT OF MECHANICAL MILLING TIME ON THE PHYSICAL AND MECHANICAL PROPERTIES OF THE ZA27/GRAPHTIE NANOCOMPOSITES

ÇANAKÇI A., ÖZKAYA S., KESKİN Ö. Y.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.683-686

Production and Properties of Al2024- 2 wt. (SiC-B4C) HybridNanocomposite

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1322-1327

Production of Biomaterials by Powder Metallurgy Methods and Applications

ÖZKAYA S., ÇANAKÇI A., ÇELEBİ M., KESKİN Ö. Y.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.26-29

Production of Aluminum foam with TiH2

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1900-19002

Metal Foams Produced by Powder Metallurgy Methods and Applications

ÇANAKÇI A., KESKİN Ö. Y., ÖZKAYA S., ÇELEBİ M.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.27-30

Microstructure and Mechanical Properties of Al2024-B4C Nanocomposite Produced by Mechanical Alloying and Hot Pressing Method

KARABACAK A. H., ÖZKAYA S., ÇANAKÇI A., ÇALIGÜLÜ U.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1285-1289

Characterization and Mechanical Properties of Al2024-SiC Nanocomposites Fabricated by Mechanical Alloying

KARABACAK A. H., ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1299-1304

A Review on The Powder Coating with Mechanical Milling

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Eylül 2017, ss.228-232

DETERMINING OF THE EFFECT OF HEAT TREATMENTPARAMETER ON THE GRAIN SIZE OF AISI 316L STAİNLESS STEEL USİNG TAGUCHİ METHOD

ERDEMİR F., ÇANAKÇI A., VAROL T., YALÇIN E. D.

PPM 2017, 12 - 15 Ekim 2017

Application of Artificial Neural Network for Prediction of Coating Thickness in Fe-Al Coatings

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Ekim 2017, ss.210-214

The Effect of Milling Time on the Physical and Mechanical Properties of the ZA27-Graphite Nano-Composites

2.Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.683-686

The Effect of Milling Time on the Morphology and Size of ZA27 Based Composite Powders

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H.

2. Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.687-689

Microstructure and some mechanical properties of Al2024-B4C composite fabricated by powder metallurgy

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., VAROL T., YALÇIN E. D.

2. International Conference on Advanced Engineering Technologies, 21 - 23 Eylül 2017

Korozyona Dirençli Zn - Al Alaşımlarının Toz Metalurjisi Yöntemi ile Üretilmesi

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.30-33

Microstructure and Some Mechanical Properties of Al2024–B4C Composites Fabricated by Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., VAROL T., YALÇIN E. D.

International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1314-1321

Corros ion Properties o f ZA27/ B4C Composites Fabri cated By Powder Metallurgy

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.27-32

Determining of the effect of heat treatment parameter on the grain size of AISI 316L stainless steel using Taguchi method

ERDEMİR F., ÇANAKÇI A., VAROL T., YALÇIN E. D.

Uluslararası Gözenekli ve Toz Malzemeler Sempozyumu ve Sergisi, PPM 2017', Aydın, Türkiye, 12 - 15 Eylül 2017, ss.215-218

Fabrication of AL2O3 Nano-Powders by a Planetary Ball Milling Without Process Control Agent

VAROL T., ERDEMİR F., ÇANAKÇI A.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Eylül 2017, ss.233-236

Electrical Contact Materials

VAROL T., ÇANAKÇI A., ERDEMİR F., YALÇIN E. D.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Eylül 2017, ss.242-247

Determining of the Effect of Heat Treatment Parameter on The Graın Sıze of AISI 316L Stainless Stell Using Taguchi Method

ERDEMİR F., ÇANAKÇI A., VAROL T., YALÇIN E. D.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Eylül 2017, ss.219-222

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÇUVALCI H., GÜLER O., ERDEMİR F.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.364-370

Laboratory Test researches on Warm Mix and Hot Mix Asfalt Included Sub-Micron Ulexit Mineral

KÜTÜK T., KÜTÜK S., GÜNBEY R. E., ÇANAKÇI A., KOCAKERİM M. M.

19th International Conferance on Resources in Sciences andTechnology, BARSELONA, İspanya, 27 Temmuz 2017 - 28 Ocak 2018, ss.58-59

Resistance of ZA27 Matrix Reinforced with Nanographene Particle

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F., ÇELEBİ M.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.352-357

Mechanical Properties of ZA27/Graphene Nanocomposites Produced by Powder Metallurgy Method

YALÇIN E. D., ÇANAKÇI A., ERDEMİR F., VAROL T., ÇELEBİ M.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.371-374

Laboratory test researches on warm mix and hot mix asphalt included sub-micron sized ulexite mineral

KÜTÜK T., KÜTÜK S., GÜNBEY R. E., ÇANAKÇI A., KOCAKERİM M. M.

19th International Conference on Researches in Science Technology (ICRST), Barselona, İspanya, 27 - 28 Temmuz 2017, cilt.1, ss.50-51

Effects Of Alumina Nanoparticle Content On The Microstructure And Mechanical Properties Of ZA27/Al2O3 Nanocomposites Fabricated By Powder Metallurgy

ÇELEBİ M., ÇUVALCI H., ÇANAKÇI A., GÜLER O., VAROL T.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.353-358

Ceramic Foams

VAROL T., ÇANAKÇI A., ERDEMİR F., ÇELEBİ M., YALÇIN E. D.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.370-380

A Review on the New Armour Ceramic Meterials

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.381-385

Wear Resistance Of ZA27 Matrix Reinforced with Nanographene Particle

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F., ÇELEBİ M.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.347-352

metal köpükler

VAROL T., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

IDEF 2017 13’xxüncü Uluslararası Savunma Sanayii Fuarı, 9 - 12 Mayıs 2017

Effect of Processing Parameters on AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ÇELEBİ M., KARABACAK A. H.

Uluslararası 2. Savunma Sanayi Sempozyumu, 6 - 08 Nisan 2017, ss.636-640

Fabrication of B4C Reinforced Al 5083 Matrix Composite Materials by Using Mechanical Alloying and Investigation of Their Properties

OKUR O., ÖZKAYA S., ÇANAKÇI A., ÇALIN R.

Fabrication of B4C Reinforced Al 5083 Matrix Composite Materials Using byMechanical Alloying and Investigation of Their Properties, 6 - 08 Nisan 2017

Effect of procecessing parameters on AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ERDEMİR F.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.636-640

Effect of Processing Parameters on Functionally Graded AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., ÇELEBİ M., KESKİN Ö. Y., KARABACAK A. H.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.636-640

Metal Foams

VAROL T., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.641-649

Fabrication of B4C Reinforced Al 5083 Matrix Composite Materials Using by Mechanical Alloying and Investigation of Their Properties

Okur O., ÖZKAYA S., ÇANAKÇI A., ÇALIN R.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.120

Aşınmaya ve Korozyona Dirençli Nanoparçacık Takviyeli Kompozit Yatak Malzemesinin Toz Metalurjisi Yöntemi ile Üretilmesi

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F., VAROL T., KARABACAK A. H.

2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU (IDEFIS 2017), Kırıkkale, Türkiye, 6 - 08 Nisan 2017, cilt.2, ss.189-190 Sürdürülebilir Kalkınma

Fonksiyonel Derecelendirilmiş Al2024/ B4C Nanokompozitlerinin Balistik Performansları

ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.

2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU (IDEFIS 2017), Kırıkkale, Türkiye, 6 - 08 Nisan 2017, cilt.2, ss.16-20

The Production and Wear and Corrosion Resistance Composite bearing Material Reinforcement with Nanoparticle by Powder Metallurgy

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., KARABACAK A. H.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.581-586

The ballistic performance of Functionally Graded Al2024/B4C Nanocomposites

ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.

2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.650-656

Metallic Biomaterials Biocompatibity and Mechanical Properties

VAROL T., ÇANAKÇI A., ÖZKAYA S., ÇUVALCI H.

16th International Materials Symposium IMSP’2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.1102-1109

Effect of CNT Content on the Synthesis and Characterization of Copper CNT Composites Fabricated By Ball Milling

16th International Materials Symposium IMSP’2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.583-588

EFFECT OF MECHANICAL ALLOYING ON CORROSION BEHAVIOUR OF AlCuMg B 4 C NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

14.ULUSLARASI KOROZYON SEMPOZYUMU, 5 - 07 Ekim 2016, ss.526-530

Development of response surface methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016, ss.2025-2030

Properties of Silicon Carbide Reinforced Nanocomposites Prepared by Flake Powder Metallurgy Processing

VAROL T., ÇANAKÇI A., YALÇIN E. D., ÖZKAYA S.

16th International Materials Symposium, 12 - 14 Ekim 2016, ss.1346-1352

Metallic Biomaterials Biocompability and Mechanical Properties

VAROL T., ÇANAKÇI A., ÇUVALCI H., ÖZKAYA S.

16th International Materials Symposium, 12 - 16 Ekim 2016, ss.1102-1109

Devolopment of surface response methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016, ss.2025-2030

AN INVESTIGATION ON TRIBOLOGICAL PROPERTIES OF ZA27-B4C-Gr HYBRID NANOCOMPOSITES

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F.

1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016, cilt.1, sa.617, ss.15-20

AN INVESTIGATION ON TRIBOLOGICAL PROPERTIES OF ZA27-B4C-Gr HYBRID NANOCOMPOZİTES

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F.

1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016, cilt.1, sa.617, ss.15-20

Development of response surface methodology for optimization of process parameters on the formation of Fe-Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016, cilt.1, sa.591, ss.53-59

Metallic Biomaterials Biocompatability and mechanical properties

VAROL T., ÇANAKÇI A., ÖZKAYA S., ÇUVALCI H.

16th International Materials Symposium, 12 - 14 Ekim 2016

Tribological perfprmance under dry sliding conditions of copper-graphene nanocomposites

16th International Materials Symposium, 12 - 14 Ekim 2016

Effect of CNT content on the synthesis and characterization of Copper-CNT composites fabricated by ball milling technique

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.583-588

Metallic Biomaterials: Biocompatibility and Mechanical Properties

VAROL T., ÇANAKÇI A., ÖZKAYA S., ÇUVALCI H.

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.1102-1109

PROPERTIES OF SILICONE CARBIDE REINFORCED NANOCOMPOSITES PREPARED BY FLAKE POWDER METALLURGY

VAROL T., ÇANAKÇI A., YALÇIN E. D., ÖZKAYA S.

16. Uluslararası Malzeme Sempozyumu (IMSP'2016), Denizli, Türkiye, 12 - 14 Ekim 2016, cilt.1, ss.1346-1352

Properties of Silicon Carbide Matrix Nanocomposites Prepared by Flake Powder Metallurgy Processing

VAROL T., ÇANAKÇI A., YALÇIN E. D., ÖZKAYA S.

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.1346-1352

Arc erosion behavior of Cu-nanographite electrical contact materials

VAROL T., ÇANAKÇI A., ÖZTÜRK A.

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.271-277

TRIBOLOGICAL PERFORMANCE UNDER DRY SLIDING CONDITIONS OF COPPER-GRAPHENE NANOCOMPOSITES

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.1761-1766

Metallic Biomaterials : Biocompatibility and Mechanical properties

VAROL T., CANAKCI A., OZKAYA S., ÇUVALCI H.

16 th International Materials Symposium IMSP' 2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.1102-1109

Mekanik Alaşımlamanın AlCuMg/B4C Nanokompozitlerinin Korozyon Davranışı Üzerine Etkisi

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.526-530

THE EFFECT OF NANO-Al2O3 CONTENT ON THE CORROSION BEHAVIOUR OF ZA27/Al2O3 NANOCOMPOSITES

Çelebi M., Çuvalcı H., Güler O., Çanakçı A.

XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.566-570

CORROSION BEHAVIOR OF ZA27/GRAPHITE/AL2O3 HYBRID NANOCOMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.

XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.541-547

Corrosion properties of Al2024/SiC composites compared with Al2024/B4C composites.

ERDEMİR F., ÇANAKÇI A., ÖZKAYA S., YALÇIN E. D.

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Türkiye, 5 - 07 Ekim 2016, sa.55, ss.23-26

Electrochemical Corrosion Study of Al2024/SiC Composites

ERDEMİR F., ÇANAKÇI A., VAROL T.

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.26-32

THE EFFECT OF GRAPHITE CONTENT ON THE CORROSION CHARACTERISTIC OF ZA27 ALLOY BASED COMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.

XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.535-540

Study on Microstructure and Wear Properties of B4C Nanoparticles reinforced ZA27 nanocomposites

International Conference of Engineering and Natural Sciences, 24 - 28 Mayıs 2016, ss.2850-2853

Development of response surface methodology for optimization of process parameters on the formation of Fe-AL intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress (IMSEC2016), Adana, Türkiye, 26 - 28 Eylül 2016, ss.2025-2030

Study on Microstructure and Wear Properties of B4C Nanoparticle Reinfroced ZA27 Nanocomposites

ICENS2016, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2850-2853

Corrosion Behavior of AlCuMg B4C Nanocomposites Produced by Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F.

ICENS2016, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2846-2849

CORROSION BEHAVIOR OF FUNCTIONALLY GRADED Al2024/ B4C-SiC HYBRID COMPOSITES

XIV. INTERNATIONAL CORROSION SYMPOSIUM, 5 - 07 Eylül 2016

Corrosion Behaviour of AlCuMg B4C Nanocomposites Produced by Powder Metallurgy Method

ICENS, 24 Mayıs 2016 - 28 Mayıs 2012

WEAR INVESTIGATION OF Al2024/SiC COMPOSITES BY RESPONSE SURFACE METHODOLOGY

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

International Conference on Thermophysical and Mechanical Properties of Advanced Materials, İzmir, Türkiye, 1 - 03 Eylül 2016, ss.235-241

Wear İnvestigation of Al2024/SiC Composites by response surface Methodology

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

3rd INTERNATIONAL CONFERENCE ON THERMOPHYSICAL AND MECHANICAL PROPERTIES OF ADVANCED MATERIALS, İzmir, Türkiye, 1 - 03 Eylül 2016, ss.49-50

Tribological Behaviours of ZA27/Graphene nanocomposites

YALÇIN E. D., ÇANAKÇI A., ERDEMİR F., VAROL T.

3rd INTERNATIONAL CONFERENCE ON THERMOPHYSICAL AND MECHANICAL PROPERTIES OF ADVANCED MATERIALS, İzmir, Türkiye, 1 - 03 Eylül 2016, ss.48-49

ANTIMICROBIAL MOUTHRINSES: ARE THEY SAFE FOR DENTAL IMPLANTS?

ERCAN E., Arın T., İnan Bektaş K., Çanakçı A., Çankçı S.

2016 IADR/APR General Session & Exhibition, Seul, Güney Kore, 22 - 25 Haziran 2016, ss.16

Corrosion Behavior of AlCuMg/B4C Nanocomposites Produced by Powder Metallurgy Method

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2846-2849

The Effect of Graphite Content on the Wear Behavior of ZA27/Al2O3/Graphite Hybrid Nanocomposites

GÜLER O., ÇUVALCI H., ÇANAKÇI A., ÇELEBİ M.

2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Saray Bosna, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.192-198

Study on Microstructure and Wear Properties of B4C Nanoparticle Reinforced ZA27 Nanocomposites

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2850-2853

Study on Microstructure and Wear Properties of B4C nanoparticle reinforced ZA27 nanocomposites

International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.1

Investigation of Properties of CNT Reinforced HA Biocomposites Produced by Mechanical Alloying Technique

ÇANAKÇI A., ÖZKAYA S., VAROL T., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.361

The Effect of Nano-Particle Content on the Wear Behavior of ZA27/Al2O3 Nanocomposites

GÜLER O., ÇUVALCI H., ÇANAKÇI A., ÇELEBİ M.

2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Saray Bosna, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.199-206

Functionally Graded Materials

VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.1643-1649

WEAR PROPERTIES OF ZA 27 ALLOY AND ITS COMPOSITES REINFORCED WITH B4C AND GRAPHENE NANOPARTICLES

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., VAROL T.

1st International Conference on Engeneering Technology and Applied Sciences, Afyon, Türkiye, 21 - 22 Nisan 2016, ss.1-3

GRAFEN KATKILI BAKIR ESASLI ELEKTRİK MOTOR FIRÇALARI

İPEK H., ÇUVALCI H., ÇANAKÇI A.

International Conference on Material Science and Technology, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.40

STUDY ON MICROSTRUCTURES AND WEAR PROPERTIES OF ZA 27 ALLOY AND ITS COMPOSITES REINFORCED WITH B4C AND GRAPHENE NANOPARTICLES

International Conference on Material Science and Technology in Cappadocia(IMSTEC 2016), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.164

B4C VE GRAFEN İLE TAKVİYE EDİLMİŞ ZA27 ALAŞIMININ MİKRO YAPISI VE AŞINMA DAVRANIŞLARI

International Conference on Material Science and Technology in Cappadocia(IMSTEC 2016), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.52 Sürdürülebilir Kalkınma

Determination of Effect of B4C Content on Densityand Tensile Strength of AA7075 B4C Composite Produced via Powder Technology

NAZİK C., TARAKÇIOĞLU N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

OPTIROB, ICAEM, ICREB 2015, 26 - 29 Haziran 2015

THE EFFECT OF MILLING TIME ON MECHANICAL PROPERTIES OF ALCUMG-B4C NANOCOMPOSITES PRODUCED BY HIGH ENERGY MILLING

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Aralık 2015, ss.26-30

International Porous Powder Materials Symposium and Exhibition PPM2015

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S., YALÇIN E. D.

nternational Porous Powder Materials Symposium and Exhibition PPM2015 , 15 - 18 Eylül 2015

THE EFFECT OF AL2O3 CONTENT ON THE WEAR BEHAVIOR OFZA27/Al2O3/GRAPHITE HYBRID NANOCOMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.

3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.558-569

EFFECT OF MECHANICAL ALLOYING ON MECHANICAL PROPERTIES OF AlCuMg-B4C NANOCOMPOSITES

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.186-192

EFFECT OF B4C CONTENT AND MILLING TIME ON WEAR BEHAVIOUR OF MECHANICALLY ALLOYED AlCuMg NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.173-179

THE MICROSTRUCTURE OF NANO B4C PARTICLE REINFORCED Al-Cu-Mg ALLOY MATRIX NANOMPOSITES PRODUCED BY FLAKE POWDER METALLURGY METHOD

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.585-590

THE FABRICATION AND WEAR BEHAVIOR OF ZA27 - B4C - GRAPHENE HYBRID NANOCOMPOSITES

ULUSLARARASI KATILIMLI III. EGE KOMPOZİT MALZEMELER SEMPOZYUMU, Aydın, Türkiye, 5 - 07 Kasım 2015, ss.1

THE EFFECT OF NANO PARTICLE REINFORCEMENT ONMICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZA27/GRAPHITEAND ZA27/Al2O3 COMPOSITES FABRICATED BY HOT PRESSING METHOD

Çelebi M., Çuvalcı H., Çanakçı A., Güler O., Erdemir F.

3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.580-584

MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF ZA27ALLOYS REINFORCED BY NANO-GRAPHITE AND NANO-ALUMINA

Çelebi M., Çuvalcı H., Çanakçı A., Güler O.

3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.400-406

Farklı ajan ve sistemlerin kavite dezenfeksiyonunda kullanıldığında nanosızıntı üzerine etkilerinin in vitro incelenmesi.

ERDEMİR I., BAYGIN Ö., TÜZÜNER T., Erdemir F., Çanakçı A.

22. Türk Pedodonti Derneği Bilimsel Kongresi, Girne, Türkiye, 2 - 05 Kasım 2015, ss.23

Farklı Ajan ve Sistemlerin Kavite Dezenfeksiyonunda Kullanıldığında Nanosızıntı Üzerine Etkilerinin İn Vitro İncelenmesi

Erdemir İ., BAYGIN Ö., TÜZÜNER T., ERDEMİR F., ÇANAKÇI A.

22.Türk Pedodonti Derneği Kongresi, Girne, Kıbrıs (Kktc), 2 - 05 Kasım 2015, ss.37

B4C VE GRAFEN NANO PARÇACIKLARI İLE GÜÇLENDİRİLMİŞ ZA27 ALAŞIMININ MİKRO YAPISI VE AŞINMA DAVRANIŞLARININ İNCELENMESİ

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

MYT 2015, Türkiye, 23 - 25 Ekim 2015 Sürdürülebilir Kalkınma

Nano-Parçacık Takviyesinin Mekanik Alaşımlama Yöntemiyle Üretilen Za-27/Al2o3 Kompozitlerinin Mekanik Özelliklerine Etkisi

Çelebi M., Çuvalcı H., Çanakçı A., Güler O.

Symposium of New Technologies in Engineering , Bayburt, Türkiye, 22 - 24 Ekim 2015, ss.204-210

B4C ve Grafen Nano Parçacıkları ile Güçlendirilmiş ZA27 Alaşımının Mikro Yapısı ve Aşınma Davranışlarının İncelenmesi

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

MÜHENDİSLİKTE YENİ TEKNOLOJİLER SEMPOZYUMU MYT 2015, Bayburt, Türkiye, 22 - 24 Ekim 2015, ss.1-4 Sürdürülebilir Kalkınma

Prediction Model For Densification Behaviour of Powder Metallurgy Al Cu Mg B4C composites

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., İPEK H.

International Porous and Powder Materials Symposium and Exhibition, 15 - 18 Eylül 2015

WEAR BEHAVIOR OF AL2024/SIC COMPOSITES PRODUCED BY POWDER METALLURGY METHODS

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.11-15

Application of Back-Propagation Neural Network Technique to Prediction of the Abrasive Wear Behavior of Al2014/B4C Composite

TURKEYTRIB'15, 1rst International Conference on Tribology,, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.1

AN INVESTIGATION ON WEAR BEHAVIOR OF CU–GRAPHITE NANOCOMPOSITES PREPARED BY FLAKE POWDER METALLURGY

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.6-10

APPLICATION OF BACK-PROPAGATION NEURAL NETWORK TECHNIQUE TO PREDICTION OF THE ABRASIVE WEAR BEHAVIOR OF AL2014/B4C COMPOSİTE

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.1-5

EFFECT OF B4C ADDITION ON WEAR BEHAVIOUR OF AlCuMg NANOCOMPOSITES

ÇELEBİ M., ÇANAKÇI A., ÇUVALCI H.

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.16-19

Determination of Effect of B4C content of B4C on density and tensile strength of aa7070 B4C composite produced via powder technology

NAZİK C., TARAKÇIOĞLU N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

ICREB, ICAEB 2015, 26 - 29 Haziran 2015

FABRICATION OF NANOGRAPHITE REINFORCED ZA-BASED 27 ALLOY MATRIX COMPOSITES BY MECHANICAL ALLOYING METHOD

International Porous and Powder Materials, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.101-105

PREDICTION MODEL FOR DENSIFICATION BEHAVIOR OF POWDER METALLURGY Al-Cu-Mg/B4C COMPOSITES

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., İPEK H.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.397-402

PRODUCTION AND CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/SiC-B4C HYBRID COMPOSITES BY HOT PRESSING PROCESS

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.36-39

Prediction Model for Densification Behavior of Powder Metallurgy Al-Cu-Mg/B4C Composites

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., İPEK H.

International Porous and Powder Materials Symposium and Exhibition PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.384-389

MICROSTRUCTURAL CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/Sic COMPOSITES PRODUCED BY HOT PRESSING AND CONSOLIDATION

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.31-35

THE EFFECT OF MILLING TIME AND PARTICLE SIZE ON THE FLAKE MORPHOLOGY AND FLAKE PARTICLE SIZEOF AL-CU-MG ALLOY POWDERS PREPARED VIA MECHANICAL MILLING

YALÇIN E. D., ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

International Porous Powder Materials Symposium and Exhibition PPM2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.21-25

THE EFFECT OF MILLING TIME AND PARTICLE SIZE ON THE FLAKE MORPHOLOGY AND FLAKE PARTICLE SIZE OF Al-Cu-Mg ALLOY POWDERS PREPARED VIA MECHANICAL MILLING

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.21-25

Production by Gas Atomization and Characterization of AA7075 Metal Powders

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A.

The International Conference On Science, Ecology And Technology I, Vienna, Avusturya, 25 - 28 Ağustos 2015, ss.446-452

Effect of The Different Milling Process on The Formation of Fe-Al Intermetallic Coating on Low-Carbon Steel

ÇANAKÇI A., ERDEMİR F., VAROL T., Dalmış R., ÖZKAYA S.

15th International Materials Symposium, Denizli, Türkiye, 15 - 17 Ekim 2014, ss.88-96

Fabrication of Functionally Graded Al 2024/B4C Composites By Powder Metallurgy

15th International Materials Symposium, Denizli, Türkiye, 15 - 17 Ekim 2014, ss.97-103

Wear and Corrosion Behavior of Fe-Al Intermetallic Coatings on the Low Carbon Steel Synthesized by Mechanical Alloying

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., Mindivan H.

15th International Materials Symposium, Denizli, Türkiye, 15 - 17 Ekim 2014, ss.104-113

The Effect Of the Contact Cycles On The Microstructure And Performance Of Electrical Conract Materials

ÇANAKÇI A., VAROL T., İPEK H., SİNAN A.

17th International Metallurgy and Material Congress, 11 - 13 Eylül 2014

Artificial Neural Network Approach for the Prediction of Coating Thickness in Fe-Al Coatings Fabricated by Mechanical Milling

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.

17th International Metallurgy and Materials Congress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.995-1003

The effect of the contact cycles on the microstructure and performance of electrical contact materials

ÇANAKÇI A., VAROL T., İPEK H., Amran S.

17th International Metallurgy and MaterialsCongress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.406-410

Artificial neural network approach for the prediction of coating thickness in Fe-Al coatings fabricated by mechanical milling

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.

17th International Metallurgy and Materials Congress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.995-1003

Synthesis And Characterization Of B4c Particles Reinforced Al-Cu-Mg Alloy Matrix Nanocomposite Powders By High Energy Mechanical Milling

ÖZKAYA S., ÇANAKÇI A., VAROL T.

17th International Metallurgy and MaterialsCongress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.459-463

Production and characterization of bronze-Cr-Ni composites produced by powder metallurgy

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

17th International Metallurgy and Materials Congress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.207-213

The Prediction of Properties of B4C Particle Reinforced Metal Matrix Composites Using Artificial Neural Networks

17th International Metallurgy and Materials Congress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.451-458

The prediction of properties of B4C particle reinforced metal matrix composites using artificial neural networks

17th International Metallurgy and MaterialsCongress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.451-458

Artifical neural network approach for the prediction of coating thickness in Fe-Al caoatings fabricated by mechanical milling

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.

17th International Metallurgy and MaterialsCongress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.995-1003

Production and characterization of Bronze-Cr-Ni composites produced by powder metallurgy

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

17th International Metallurgy and MaterialsCongress, İstanbul, Türkiye, 11 - 13 Eylül 2014, ss.207-213

Analysis of the prediction of compressibility of powder metallurgy Al2024-B4C composites using artificial neural networks

7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.24-25

Synthesis and characterizion of nanographite reinforced Cu matrix composite powders by high energy ball milling

7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.26-27

Processing of AA7075 powders from recycling chips by mechanical milling

7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.18-19

The study on the production of Al7075-Al-SiC composites by the recycling chips

7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.20-21

Effect of mechanical milling on the physical and mechanical properties of powder metallurgy Al2024-B4C composites

7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.22-23

AA7075 Metal Matrisli %10 B4c Parçacık Takviyeli Kompozitlerin Mekanik Alaşımlama Yöntemiyle Üretimi Ve Özelliklerinin Geliştirilmesi

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A., VAROL T.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.317-321

Mekanik Alaşımlama Yöntemi ile CuSn10-B4C-GRAPHİTE HİBRİT Nanokompozit Metal Tozlarının Üretilmesi

YALÇIN E. D., çanakçı a., varol t., özkaya s., çuvalcı h., e f.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.4

Mekanik alaşımlama yöntemi ile CuSn10-B4C-grafit hibrit nanokompozit tozlarının üretimi

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.789-795

AA7075 metal matrisli %10 B4C parçacık takviyeli kompozitlerin mekanik alaşımlama yöntemiyle üretimi ve özelliklerinin geliştirilmesi

Nazik C., Tarakçıoğlu N., ÇANAKÇI A., VAROL T., ÖZKAYA S.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.317-321

Mekanik Alaşımlama Yöntemi Ile Cusn10-B4c-Grafit Hibrit Nanokompozit Tozlarının Üretimi

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.789-795

Biyomalzemeler

ÇANAKÇI A., DALMIŞ R., VAROL T., ERDEMİR F., ÖZKAYA S.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.649-660

Mekanik öğütme işlemi üzerine yeni bir işlem kontrol katkısı tekniği etkisinin bir yapay sinir ağı modeli kullnılarak analizi

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.221-228

B4c Particle Takviyeli Al2024 Metal Matrisli Kompozitlerin Özellikleri Üzerine Sıcak Presleme Parametrelerinin Etkisi

ÇANAKÇI A., ÖZKAYA S., VAROL T., ERDEMİR F.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.642-650

Mekanik Alaşımlama Yöntemi Ile Düşük Karbonlu Çelik Üzerine Al-B4c Kompozit Kaplamalarının Sentezi

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S., DALMIŞ R.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.371-379

Mekanik alaşımlama yöntemi ile Al2024-B4C kompozit tozlarının üretimi ve karakterizasyonu

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.781-788

Mekanik Alaşımlama Yöntemi İle CuSn10-B4C-Graphite Hibrit Nanokompozit Tozlarının Üretimi

CANAKCI A., VAROL T., ÇUVALCI H., ERDEMIR F., OZKAYA S., YALCIN E. D.

II. Ulusal Ege Kompozit Malzemeler Kongresi, İzmir, Türkiye, 7 - 09 Kasım 2013, ss.789-796

Artificial neural network approach to predict of effect of process control agent on the microhardness of Al-Al2O3 composite powders produced by mechanical alloying

International Porous Powder Materials Symposium & Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.722-726

Abrasive wear Behaviour of powder Metallurgy CuSn10-Graphite Metal Matrix Composites Produced by Powder Metallurgy

CANAKCI A., ÇUVALCI H., VAROL T., ERDEMIR F., OZKAYA S., YALCIN E. D.

The proceedings of the 1st International Porous and powder Materials Symposium and Exhibition PPM 2013, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.58-62

Microstructure and characterization of B4C reinforced Al2024 alloy matrix composites produced by mechanical alloying technique

International Porous Powder Materials Symposium & Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.150-154

Abresive wear behavior of powder metalurgy CuSn10 Graphite metal matrix composites produced by powder metallurgy

YALÇIN E. D., çanakçı a., varol t., özkaya s., erdemir f.

International Porous Powder Materials Symposium and Exhibition PPM2013, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.4

Artificial Neural Network Approach to Predict of Effect of Process Control Agent on the Microhardness of Al-Al2O3 Composite Powders Produced by Mechanical Alloying

The 1st International Porous and Powder Materials Symposium and Exhibition PPM 2013, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.722-726

Effects of different process control agent on characteristics of mechanically milled Al2024 powders

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., VAROL T.

International Porous Powder Materials Symposium & Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.804-808

Abrasive Wear Behavior Of Powder Metallurgy Cusn10-Graphite Metal Matrix Composites Produced By Powder Metallurgy

ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

International Porous Powder Materials Symposium & Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.58-62

Fabrication Of Fe-Al Intermetallic Coatings Using Mechanical Milling Technique

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

International Porous Powder Materials Symposium & Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.809-813

Effects Of Different Process Control Agent On Characteristics Of Mechanically Milled Al2024 Powders

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., VAROL T.

International Porous Powder Materials Symposium & Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.804-808

Artifical neural network approach to predict of effect of process control agent on particle size of Al-%10 Al2O3 composite powders fabricated by mechanical alloying

16th International Metallurgy & Materials Congress, İstanbul, Türkiye, 13 - 15 Eylül 2012, ss.129-138

Optimization of process parameters of Al2024 powder produced by mechanical alloying

ÇANAKÇI A., ERDEMİR F., VAROL T.

16th International Metallurgy & Materials Congress, İstanbul, Türkiye, 13 - 15 Eylül 2012, ss.154-163

Artificial Neural Network Approach to Predict of Effect of Process Control Agent on Particle Size of Al-%10 Al2O3 Composite Powders Fabricated by Mechanical Alloying

IMMC 16. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 13 - 15 Eylül 2012, ss.129-138

Fabrication and characterization of Al2024-B4C composite powders by mechanical alloying method

16th International Metallurgy & Materials Congress, İstanbul, Türkiye, 13 - 15 Eylül 2012, ss.146-153

AA2024-B4C metal matrisli kompozitlerin mekanik alaşımlama yöntemi ile üretimi ve mikroyapısı

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 17 - 19 Kasım 2011, ss.204-215

Toz metalurjisi yöntemi ile üretilen Al-Al2O3 kompozitlerinin özellikleri üzerine takviye oranının etkisi

ÇANAKÇI A., VAROL T., Ertok Ş.

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 17 - 19 Kasım 2011, ss.144-154

Yüksek enerjili öğütmeyle üretilen AA2024-B4C kompozit tozların karakterizasyonu

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Türkiye, 17 - 19 Kasım 2011, ss.667-675

The effect of reinforcement ratio on hardness of Al-Al2O3 composites fabricated by mechanical alloying technique

ÇANAKÇI A., VAROL T., Ertok Ş.

6th International Powder Metallurgy Conference & Exhibition, Ankara, Türkiye, 5 - 09 Ekim 2011, ss.232-240

The effect of milling speed on particle morphology and particle size of Al2024 powders prepared by using high energy ball milling

ÇANAKÇI A., VAROL T., Şen R., Yıldız S.

6th International Powder Metallurgy Conferance & Exhibition, Ankara, Türkiye, 5 - 09 Ekim 2011, ss.628-633

The effect of gradual process control agent technique on the morphology of Al powders fabricated by high energy ball milling

6th International Powder Metallurgy Conference & Exhibition, Ankara, Türkiye, 5 - 09 Ekim 2011, ss.701-710

Aşamalı proses kontrol katkısı tekniğinin yüksek enerjili öğütme prosesi üzerine etkisi